Tie bars technical specification | Longitudinal joints in pqc Pavement

#tiebar#longitudinaljoint#pqc#ce&lt
Tie bars are typically used at longitudinal joints or between an edge joint and a curb or shoulder. Typically, tie bars are about 12.5 mm (0.5 inches) in diameter and between 0.75and 1.0 m (24 and 40 inches long),spaced by 0.50 m. each other
Also Join Us on Telegram and Get many important Information,pdfs,Excel sheet,video of civil engineering and highway construction and real time discussion with our Experience Highway Engineeeing Personal,,lets join immediately from given link
t.me/Highwayen...
For Bussiness Enquiry mail us : [e-mail]
Facebook Group : www.facebook.c...
Lets check all youtube playlist
1.Cement Concrete Construction work and Quality Test: • Cement Concrete Constr...
2.Auto level survey,Geometrics of Road- Camber| Super Elevation | side slope | Cross Section | Auto level Survee: • Roads survey and Geome...
3.HIGHWAY ENGINEERING most Important Imformation: • HIGHWAY ENGINEERING mo...
4.Base Course | Subbase Course | WMM Construction and Quality Test: • Base Course | Subbase ...
5.Earth Work Construction and Quality control Test: • Earth Work Constructio...
6.Civil engineering Q&A | Top asking interview questions: • Civil engineering Q&A ...
7.Bituminous (Ashphalt)Work | Quality test For Bituminous Work in Roads: • Bituminous (Ashphalt)W...
Subscribe for more Civil Engineering, Roads Construction and use full information

[@ayushjena2190]

clearified the concepts and also pratically sound

[@tsegayeabraham2221]

Thank you to support my class

[@LankeshwarUk]

This video is very helpful 👌😆👌

[@HIGHWAYENGINEERING]

Thanks for being with my channel..

[@shubhamasude8886]

Sir pls make video on SPT test.

[@GAURAVKUMAR-by2tb]

Informative and helpful video.👍👍👍👍
For economical consideration which one is better or generally adopted at site either installed at casting or installed with drilling the slab.
Drilled holes are necessary to be filled by cement grout after insertion of tie bar or not ???
Kindly reply....

[@HIGHWAYENGINEERING]

Usually tie bars are installed at time of concreting..and its durable too,but many time there are possibilities of theft them by nonsense people they cut them and damage to concrete in such cases further action to be required to refixed them and sealed by grouting agent...

[@maheshchaudhari3987]

Concrete road ki max height permission in India,,for DISTRICT ROAD & STATE HIGHWAY.

[@maheshchaudhari3987]

I want information regarding max height of c c road,,

[@misbahulhakeem8358]

🎉

[@Pankajkumar-ot7su]

Sir ye green colour main jo h vo h dowel bar ya fir jo steel se green wale bandhe gye h vo h

[@chandrashekharpatel3797]

Sir ! is 2720 part 7 and 8 me jo rammer use hota hai 2.6 kg and 4.9 kg weight parctically kaise pata kartein hai ki kitna weight ka hai

[@HIGHWAYENGINEERING]

After remove casing of mould weight rammer with road plunger and cap...weight would be nearby 2.6 kg for light rammer also its small in hight...and 4.9 kg for large rammer and long in length

[@tanisha644]

Sir 1km ka road hai aur har 4m pr saw cutting krni h to no of saw cutting kaise nikale.
Meine 1000/4 kiya tha to 250aaya tha but mere senior bol rhe h ki 250 +1 bhi hoga. Mujhe smjh nhi aaya kyu hoga.

[@HIGHWAYENGINEERING]

Agar road ke dono or continue road he to 250+1aayega kuki dono corner bhi judenge

[@tanisha644]

@@HIGHWAYENGINEERING aur 7 mtr carriage way hai 200 ki spacing h to Kitne bar lgenge

[@tanisha644]

@@HIGHWAYENGINEERING agr road Ho hi Ek km ka to. Kya ans aayega

[@tanisha644]

Video bna do sirf is topic pr Ek. Usmein 1000 meter ki road mein starting aur end ki saw cutting chodkr bichmeinkitni aayegi pucha tha mean 1km ka road h ismein starting se 4 aur end me 4 meter chod kr 992 remaining Mei kitni saw cutting aayegi.