Hello great to see how you make this model. Thanks for the video. Please one question which is, I think, also interessting for all folks who are looking: Which spray size do you use? 0.2, 0.3 or other size? Which pressure are you using? When you use the zero paint filler did you use a thinner or did you use it like it is delievered? Thank you for this information.
Hello mr. Riess, thanks! Nozzle size in my airbrush is 0,2 and 0,4mm. The last one i use for large surfaces and primer. Pressure is variable and varies between 1-1,5 Bar, it depends of diluted color. Zero Paint primers usually dont need any thinner, but if the bottle is old, than may be you need to thin it a little.
It is hard to see on bare plastic all imperfections. therefore i mark molding line and then sand that black color till it dissapears. That means for me that molding line is sanded.
Another great build. I believe your paint job is even better then on the real car. I just started Tamiya's 1955 Mercedes 300SL kit. I am going to use the same silver that you used. It appears to better looking then the Zero Paints Mercedes silver. It won't be authentic but it will look sharp just the same.
@@Scaleautoshop good idea that actually i seen people do it but never taut doing it myself but yeah ill pic up a pack make sure ive the right consitincy in mix with the tinner b4 i spray thats why ive only used my cheep 50euro airbrush and compressor few times but i will get a good one in near future but 9 times out 10 i use tamiya cans or rustolium but wat ever works i suppose buddy ill pick up couple party packs spoons to get it right on day when i do build it 👍👍👍
love the house vibe it's a great way to watch chill and see the kits before i buy them nice one dude.. it feels like lunch time at mambos ibiza but im watching a model being bult lol
@@Scaleautoshop when i see models in the store they're rated by level so example level 1 is painted and you just snap or screw together and level 10 is 1000 pieces and you've gotta put 10 pieces together that make up 1 part paint glue sticker ect.
@@Scaleautoshop you make it look so easy i wanna get one im more of a painter than a builder but i just bought a real version of that car and want to make a model
To smooth out scratches and other engravings that happen when using a scalpel, is it best to use a smooth sand paper? Also, would be nice if you included the materials/equipment you used in the description, nice work
if the scratch from the engraver remains on the front surface, then most likely you will have to putty, sandpaper will not help unfortunately. A good idea with materials description. This question comes often. Thanks .👍
Danke! Alles passt zusammen perfekt👍 Keine Nachbearbeitungen usw. Sei vorsichtig bei Toyota Logo Decal (vorne und hinten), es ist dünn und kann sehr schnell zerreißen
@@Scaleautoshop ахах, окей) я вот, около года назад заказал с13, тк первая модель и маленький бюджет, решил без покраски. (сам набор, клиры для оптики, клей покупал в городе "revell"), но после просмотра твоего видоса четко решил, что я должен накопить денег и сделать все по уму) надеюсь, когда-нибудь у меня получится сделать такую же супру👍 А тебе успехов в развитии канала, и поменьше следов от пресс-форм)
да правильно делаешь, конечно надо улучшаться от модели к модели. Но не надо сразу из броду в воду ) Про следы толкателей дважды актуально) т.к. я их сам иногда конструирую 🛠🔨 Кстати эта супра очень грамотно сконструирована, так что там сложно накосячить даже если это первая модель.
@@ThreeDaysOfDan from the actual car...a lot based on my prior experience as a Gen 4 Supra owner. From the model...a lot...but at least with the model I wouldn't get soul-crushing disappointment :P
Do you buiild more 1/24 JDM car model kits?Can you tell me which kits do you most like to build that? I can introduce more nice kits to you.You can check more on HobbyDesign website: www.hobbydesign.com.cn
The built looked awesome and the ending song got me chills from GT1 Toyota Dealership 👍
i am gt fan since 1999 :)
I dont know what its appear in my recomendation video, then i click and this absolutely awesome!!
Thanks man:) welcome to scale modeling😀
Digging the Gran Turismo music at the end.
yes, that is. toyota car shop :)
The underside is a work of art in itself! Beautiful build!
Thanks mate ! :) 🍻
Hey ziggy! You don’t know me but I love your channel
This video is AWESOME. You are a true artist. You attention to detail and seeking perfection in this art is AWESOME!
Thank you so much 😀
Best handmade GR Supra model
thanks mate.☜(゚ヮ゚☜)
You made it look easy, nice and clean build. Beautifully done!
Thank you! ヾ(^▽^*)))
nice colour choice without the clear! the silver looks stunning!
Thank you colleague👍
The music used for this video is exactly the type they have in GT Sport. Great job btw!
Cool, thanks! 🙌🤝🏎
First time I see your work.
Very nice, very good I enjoyed it, thank you.
Thank you very much!
You got me with the old Gran Turismo music
olds are here =)
Not sure why, but this car makes me feel like the Darth Vader! Super awesome build!
thanks! yes, there is something from Darth, this view look from backside..
Totally! Let the Force Be With You!
Well done! Excellent concept beautifully executed.
Glad you liked it!
Nice, suddenly your video is on my feed. Thanks for the video. One of my hidden hobby when I was teenager. Hopefully oneday I can start to build mine
dont wait too long firend! 🛠🏎😀
@@Scaleautoshop thank you for the spirit!!! For now I will enjoy your build first 😁🤙
Awesome job. You really did a lot of work on it. I loved the video.
Glad you enjoyed it!
Impressive construction! ... very professional. Thanks for the video, I found it very enriching!
Glad you enjoyed it!
great work and nice Gran Turismo Soundtrack on the end🥰🥰
thanks mate, you are right, from gran turismo 1 :)
そうそう 模型らしさとは こういうことで 安心して感動しました。
私はあなたがそれを気に入ってうれしいです
どうもありがとう
Amazing job, definitely years of experience. Unless I missed it, but I'm surprised you didn't paint the interior roof.
thanks! yes, did not paint. it is not visible anyway
Олег, классная работа!
Спасибо, Макс ✌🤝
great built... and nice video...
Glad you enjoyed it
ダイキャストモデルのような完成度、質感。
プラモデルには見えないです😲
ありがとうこれはプラモデルです ( ̄︶ ̄)↗
Better than what i did wwwwaaaaayyyy better bravo
nice Supra, thank you mate
Ookay.. this was fucking amazing to watch.. Hats off man, superior quality build! Keep it up.
thank you man :)
Great job. What did you use to clear the body after using the panel line
i used here white spirit based thinner. it doesnt affect the base coat.
Cool build..what's with that big brush..🤣..you gonna make me start building cars..excellent work!
with big brush? i dont know, just a big makeup brush :)
@@Scaleautoshop ...🤣🤣
How many man hours to complete? Liked and sub'd, only jealous people would dislike, top job!
thanks mate. This build took around 40 hours
@@Scaleautoshop Amazing, gives me even greater idea of your dedication, cheers! inspiring!
Hello great to see how you make this model. Thanks for the video. Please one question which is, I think, also interessting for all folks who are looking: Which spray size do you use? 0.2, 0.3 or other size? Which pressure are you using? When you use the zero paint filler did you use a thinner or did you use it like it is delievered? Thank you for this information.
Hello mr. Riess, thanks! Nozzle size in my airbrush is 0,2 and 0,4mm. The last one i use for large surfaces and primer. Pressure is variable and varies between 1-1,5 Bar, it depends of diluted color. Zero Paint primers usually dont need any thinner, but if the bottle is old, than may be you need to thin it a little.
@@Scaleautoshop Thanks so much for your answer it helps me with my projects very much.
You drew a black line along the side (shoulder) of the body and then sanded it off. Can you tell me more about that? Thank you.
It is hard to see on bare plastic all imperfections. therefore i mark molding line and then sand that black color till it dissapears. That means for me that molding line is sanded.
@@Scaleautoshop Thank you! Now that I'm working from home...I want to build kits.
Another great build. I believe your paint job is even better then on the real car.
I just started Tamiya's 1955 Mercedes 300SL kit. I am going to use the same silver that you used. It appears to better looking then the Zero Paints Mercedes silver. It won't be authentic but it will look sharp just the same.
these ZP are similar to real car paints, that is why it looks authentic. Don t forget to lay paint in thin layers 👌
普通にエンジンかかって走り出しそう
素晴らしい
ありがとうございました
you used a mirror film for the side mirror? what did you use cause is really like mirror
hi, this is metal sticker, it was as stock part in box
Spectacular!
thanks mate!
この動画ではボディにクリアーコート、水研ぎ、コンパウンド磨きの行程がされてないようですが、実際はどうなんでしょうか。ちょっと気になってもので・・・ 参考にしていきたいです。
あなたは正しい、これはこのビデオではありません。後編がご覧いただけます、そこで車体を作ります。 ua-cam.com/video/-leDHIRrQGE/v-deo.html
does that glue dry pretty fast or does it take a while
which glue do you mean ? ca? it dries quick - 20 sec.
excellent work !
Thanks for the visit✌
what solution do you use to remove the panel line wash?
i use thinner for enamel/oil paints
What kind of glue did it use to glue down glass??
multipurpose glue (tamiya) or similar.
プラモのこと詳しくないんですけれど、突き詰めると実際の車の塗料と同じものを吹き付けたりするんですかね?
はい、塗料は自動車用塗料と組成が似ていますが、より細かい顔料を含んでいます。
Another reaaally good Vid build.! Also your still shots?,,,,,,, Amazeballss
Hi Shaun! thanks ! yes all what you see is made by me - build, video, shots. Video edit made by my wife :)
This and 2020 mx5roadster tamiya kit is another couple kits ive kept up until im bit better at painting so i do them right
i training on the spoon before make base coat :)
@@Scaleautoshop good idea that actually i seen people do it but never taut doing it myself but yeah ill pic up a pack make sure ive the right consitincy in mix with the tinner b4 i spray thats why ive only used my cheep 50euro airbrush and compressor few times but i will get a good one in near future but 9 times out 10 i use tamiya cans or rustolium but wat ever works i suppose buddy ill pick up couple party packs spoons to get it right on day when i do build it 👍👍👍
感動しました☺ 一モデラー から見て 凄いです‼
どうもありがとうございます
hi what glue did you used? or is it a tamiya cement?
i use ca glue and normal revell glue for bare plastic
Do you clear coat the body? If so, do you clear before or after panel lining?
i didn't clearcoat the body here. Anyway the panel lining is better after clearcoat as it will be easier to wipe off the residues.
@@Scaleautoshop Cool, thanks. The Supra came out excellent. 👍
very nice achievement! what is the reference for the red paint on the seats?
thanks! do you mean which paint? simple red from my palette.
@@Scaleautoshop was thinking of a tamiya painting. : ) Thank you for the answer
Does the car shell need to be polished?
no, that has matte coat, so it dont need to be polished
love the house vibe it's a great way to watch chill and see the kits before i buy them nice one dude.. it feels like lunch time at mambos ibiza but im watching a model being bult lol
Glad you enjoyed! 🎧😎
Paint it's awesome, I love It.
Glad you like it!
Where did you get the body paint? Do they have all colors?
i bought it on hiroboy.com. yes they have all color gamma
@@Scaleautoshop Very cool! Thanks
is that all selfmade pieces or a bought set?
this is a bought model kit
Hey which drill bit did you use for the license plate holes? What size?
hi! i think the first pass was 0,5mm and second 1,2mm
What kind of tape you use to hold the car with bumper?
this is normal tamiya tape 18mm
So nice, so clean ! Great work 👍👏 I subscribe 👌
Thanks for the sub!
I Love A90 Supra!!!
it is nice car, thanks :)
What kinds of glue did you use?
i use normal revell glue for Polystyrol, and Revell contacta clear for transparent parts
Why you use a black paint marker at the beginning of the process?
I mark all the imperfections that i will eliminate
ピンセツトにマスキングテープを巻いてるのはパーツに傷をつけないためですか?
はい、塗装部分の損傷を防ぐためです。
Very nicely done
Thanks for the visit
may i ask does the wheels rotate?
yes they are rotating 👌
@@Scaleautoshop btw,do you know how to customise to make the doors open?Would love to know how to do it as im still a beginner😁
@@Adam-pi5sd yes i know :))) but this is not a comment answer:) it will be too long
@@Scaleautoshop would glad to see u making a tutorial of it😂
can you use the body as mini z bodie
what is mini z ?
@@Scaleautoshop its a 1/28-1/24 scale rc platform by kyosho makes that come in 2wd awd and fwd
Amazing 🤩
Thanks 🤗
On average how long does it take you to complete a build?
This out of box build took ca. 40 hours
Amazing work. Definitely inspiration to get started , or back into it seriously.
トヨタのエンブレムのデカールってないんですか?
組み立て中にエンブレムを破損しました。残念ながら
What psi u spray primer and paint at?
about 20 PSI
@@Scaleautoshop thanks
What level is this model? Great job
thanks! what do you mean under level ? for beginner is full ok👍
@@Scaleautoshop when i see models in the store they're rated by level so example level 1 is painted and you just snap or screw together and level 10 is 1000 pieces and you've gotta put 10 pieces together that make up 1 part paint glue sticker ect.
Understood, i think it has level 3 of 5.
@@Scaleautoshop you make it look so easy i wanna get one im more of a painter than a builder but i just bought a real version of that car and want to make a model
@@kniftar2 congrats man, you are a lucky!
Hello it is me again! I have one more question: do you need to soak metal stickers, eg. Supra inscription in water like regular decals?
Hi man! no, you don't need that. just stick it like a regular sticker
To smooth out scratches and other engravings that happen when using a scalpel, is it best to use a smooth sand paper? Also, would be nice if you included the materials/equipment you used in the description, nice work
if the scratch from the engraver remains on the front surface, then most likely you will have to putty, sandpaper will not help unfortunately.
A good idea with materials description. This question comes often.
Thanks .👍
Хорошо когда руки из правильно места растут, жаль я иногда спешу, косячу
да, здесь спешка не нужна..
Nice work, but did you put a clear coat over the main body colour?
Thanks 🤝 no, i did not. this is a grey matt color without any coats over
@@Scaleautoshop OK, the end result is very nice, the kit went together like a dream!
you are right, this kit is very precise in itself
Tumbs up for that GT tune at the and lol.
Great work though
thanks from old GT fan ╰(▔∀▔)╯
Bro howmany mm wheelbase does it have
hi man sorry for late reply. about 103mm
@@Scaleautoshop no problem , thanks bro🙏🏻
Sehr schön gebaut👍👍👍. An dem bin ich auch grad dran. Gab es irgendwo Schwierigkeiten oder passte alles super zusammen?
Danke! Alles passt zusammen perfekt👍 Keine Nachbearbeitungen usw. Sei vorsichtig bei Toyota Logo Decal (vorne und hinten), es ist dünn und kann sehr schnell zerreißen
Привет.
Где ты взял задние фары? Я их найти не могу
привет! все что собирал было в комплекте, ничего дополнительного.
Я купил, и у меня задние фары просто белые.
Как ты сделал их красными?
понял, так покрась их изнутри прозрачной красной, tamiya x-27 краска называется
Спасибо
Nice job!
many thanks \(@^0^@)/
G
O
D
tier
thanks :)
塗膜でエッジがダレちゃうもんだけど。シャープに仕上がってて素敵
ありがとうございました
Мне очень нравится ролик.
Спасибо Рустам!
@@Scaleautoshop у меня 41 подпишиков в Ютубе Рустам.26 Кумехов Русланович.
This's fucking great! I forgot how to breathe after wathing your video! (my eng isn't perfect, becouse I'm from Russia, but I'm still learning it)
лол. да можешь говорить спокойно со мной )) спасибо )
@@Scaleautoshop ахах, окей) я вот, около года назад заказал с13, тк первая модель и маленький бюджет, решил без покраски. (сам набор, клиры для оптики, клей покупал в городе "revell"), но после просмотра твоего видоса четко решил, что я должен накопить денег и сделать все по уму) надеюсь, когда-нибудь у меня получится сделать такую же супру👍 А тебе успехов в развитии канала, и поменьше следов от пресс-форм)
да правильно делаешь, конечно надо улучшаться от модели к модели. Но не надо сразу из броду в воду ) Про следы толкателей дважды актуально) т.к. я их сам иногда конструирую 🛠🔨
Кстати эта супра очень грамотно сконструирована, так что там сложно накосячить даже если это первая модель.
awesome
Thanks Daniel
@@Scaleautoshop new subscriber here :D
エアブラシは何ミリですか? 5ミリですか?
0.4mmノズルを使用
有難うございます
I hate this car so much!. But your work to it is so awesome!
i understand you man, me personally as an old jdm lover could not accept this supra. anyway the real car looks awesome
Where can i buy Matt Storm Gray paint?
look for Zero Paints ZP-1612. i bought it on hiroboy.com
Perfect!
✌🤝
Very beautifullll
Thanks a lot ヾ(•ω•`)o
製作にどれくらいの時間がかかるのかなぁ。
構築するのは簡単なモデルです。 40時間過ごしました。
久々に車の模型作りたくなりましたが、お店の品数が遠く迄行かないとないです。
メール配信は機能しますか?オンライン注文 :)
@@Scaleautoshop
パソコンが家に無いのでオンラインしたことないです。
😮
Amazing!!
Thank you! Cheers!
Buying this Supra is about as close as I will actually ever be to wanting a 2020 Supra. The actual car was an extreme letdown for me when I drove it.
it's a pity, but I didn't drive a real
what were you expecting lmao
@@ThreeDaysOfDan from the actual car...a lot based on my prior experience as a Gen 4 Supra owner.
From the model...a lot...but at least with the model I wouldn't get soul-crushing disappointment :P
where is the engine?
there is no engine in this kit
@@ScaleautoshopMy bmw doesn't come with a motor? >:(
putz !!..perfeito.
thanks ☜(゚ヮ゚☜)
e…e…e….Exellent!!!
Thanks φ(゜▽゜*)♪
Make it look too easy! 😂
🙂
Nice BMW build ( yes I know its technically a supra)
yes, i killed two birds with one stone :)
プロの領域
私は素人です 🙂
@@Scaleautoshop マジで?
👍🏻
✌
👏👏👏👍
*^____^*
Nice bmw
BMW 😀
Scaleauto shop isn’t this z4 😅
twin brother :)
It's that a supra?!
looks like supra :)
👍
thanks:)
Do you buiild more 1/24 JDM car model kits?Can you tell me which kits do you most like to build that? I can introduce more nice kits to you.You can check more on HobbyDesign website: www.hobbydesign.com.cn
thanks, i use much of your products :))