How I Chose the Right Cuetec Cynergy Cue
Вставка
- Опубліковано 29 чер 2024
- The search for my carbon fiber cue involved choices and options bought sight unseen, since these are hard to find in store. This video is made by and for beginners, as advanced players likely already know what to buy. I could not cover everything but included the most common considerations.
00:00 Introduction
00:32 Store vs Online Purchase
01:28 Color, Design, and Customizations
02:21 Unboxing
03:00 11.8 vs 12.5 Shaft Look and Feel
04:26 11.8 vs 12.5 Gameplay Observations
08:13 The Shaft I Chose
08:28 General Recommendation
09:16 Cynergy Cue Pros
09:52 Cynergy Cue Cons
This was by far the best review I've seen on this cue. I only wish I would have watched it this morning. I just ordered my cue today.
I have purchased the 11.8 ghost edition SVB cuetec. I play 2 hrs each night and it is a great cue. I am intermediate level. Never played with a smaller tip before usually 13mm. But this 11.8 mm gets you in trouble quick. If your beginner i would not play with 11.8. You will have more consistant results with the 12.5 or larger. Think of it this way. The best players in the world try to use spin the least as possible. Or minor spin to reduce CIT. Cut induced throw. If your a beginner you will find it frustrating to shoot a very narrow tip. While trying to put little to no spin on the cue ball. So i conteract this instead of say 1 tip of right spin. I would use 1/2 tip of right spin. But the beauty of this shaft is it stays narrow the same width for a large portion of the shaft end. But all in all i wish even at my skill level i would of bought the 12.5mm But it is a great cue. Well finished just get the 12.5mm. Trust me. Its more forgiving.
Its about pocketing balls and not how much spin you can generate. Good luck
The one comparison video for the new cuetec shafts I've been looking for. Thank you
Glad it helped! Thank you for the feedback!
Great video, great cues, thank you
Great review. Thank you!
I just bought a 11.8 cynergy and coming from 12.5, stock shaft from cuetec, I'd say that I'm pretty impressed with the performance of the shaft. Puts more spin more power and overall makes it easier to put spin on many shots. Honestly was skeptical at first specially for the very thin diameter and taper but it turns out, i find it better as compared to playing with the 12.5. I'll be shifting to the 11.8 but will be keeping my 12.5 just in case. Thanks for your video, helped me alot in making ne decide to buy the shaft as an upgrade.
Very helpful. Thank you.
*BEST REVIEW ON THE INTERNET. GLAD YOU SAID DIDNT NOTICE MUCH SPIN DIFFERENCE. BEFORE THE ARGUMENT WAS A LARGER TIP HAS MORE LEATHER TO SPIN THE BALL*
Great review. Now i inderstand why i miss more with my 12.0 tip shaft than with my 12.5. Before i really couldnt figure it out but not i confirm that thinner diameter shaft used to magnify unwanted spins.
I agree about the stiffness or difficulty of screwing together and undoing the Cuetec joints, it’s no Uniloc. But once it’s tightened up it really makes a solid joint!
Great video... really goes to show that, with a little humility, you can still make an excellent & helpful video w/o being a "killer" on the table.
Good stuff man - God Bless.
Great video! I own both -- just got the 11.8 in today. Can't wait to shoot with it. I also have the Walnut, but with a wrap.
You will love them. I kind of wish I got the Walnut with the wrap too
i bought 11.8 as casual player and its really hard for long shots but am happy with it specially locked bridge i just need to get used to it .. thank you for the review
btw am using Joss cue with United joint and i agree its hard to screw and unscrew the shaft it locks really tight but all on all very smart choice of carbon shaft
I use the 12.5 on my Mezz butt. I thought about trying out the 11.8, but I do not like the shorten taper on them. Nice review!
I bought the 12.5 Ebony a few months ago, and had the same issue finding a local store to try before buying. I highly recommend ordering the maximum weight available, as the weight bolts are easily removed, and then you can experiment with a heavier or lighter cue.
THT IS ADVICE FOR ANY CUE. CAN SIMPLY CUT THE BOLT DOWN. OR BUY A BOLT IN A HARDWARE STORE TYPICALLY 3/8 X 16 FITS EVERY CUE. DIAMETER AND THREADS FROM MNFR.
I went through the same tests with Predator 11.8 and 12.4 and kept the 12.4.
I was making somewhere about 5-10% more shots with it and it felt better based on my hand size. I mostly use closed bridge. Also for whatever reason with the same tip it felt like I didn't have to hit the ball as hard to get the same follow or draw. Somehow Van Boening, both Ouschans, Woodward etc. seem to do fine with it. Matter of fact with Predator it seems all the pros are either using the 12.4 or the 12.9 Revo.
5-10% better? I haven't found a cue that makes that much difference. But maybe it's just your style. Also, Woodward uses a wood Cuetec Avid 12.25 shaft.
Been using an 11.8 for a little while now and loved it for that while, but the long shots an unintended spin on long shots, have been killing me. So I'm thinking about going back up on size. But a 12.5 seems too big now, idk. I had a 12.2 in my hand and it looked and felt perfect, but the shaft was warped so had to send that cue back. 12.2 seems hard to find. Might have to go with a 12.5 and see if it feels too big.
You have to clean the pin with paper towels and rubbing alcohol. Then repeat with the shaft threads. keep repeating with clean paper towels. Then get some fresh soft carnuba wax and fill the threads of your pin and twist your poolshaft gently onto the threads as far as it will go until it gets stuck or the friction increases to the point of increased force to twist your shaft onto the pin. If that happens STOP and untwist the shaft . Then add some more fresh soft carnuba wax to the pin threads and repeat. Do that as many times as necessary until the shaft glides onto the pin all the way until there's a secure connection. Then check it a few times by screwing and unscrewing your shaft. Especially with any kind of wood or phenolic shaft inserts and on many brand new cues depending upon the cuemaker . Also you should constantly keep your paper towels handy and sufficiently wet but not soaking wet to continuously wipe the joints down and top of the pin ,sides of the cue too, so the carnuba wax does'nt get applied to everything and get greasy attracting dust and dirt along with grease while your doing this. The idea is to leave an ultra thin film of carnuba wax on the pin threads and within the shaft insert only that you cant see or feel. You want to wipe the buttfacing with the pin and the top of the pin with alcohol along with the inner shaft threads slightly after you're done. Before you do that though you want to take a paper towel and a jewelers screwdriver or another skinny tool that fits loosely into the shaft threads and very very gently clean the borehole of any globs of carnuba wax left in there. You don't want to scratch or damage any wood or phenolic shaft threads so use a soft gentle touch when you're performing that maneuver. Even your metal pins and metal threaded shafts are going to be a similar process of maintaining your pin and shaft threads on all cues generally. Some cuemakers cues you may not ever need to do anything ever to maintain the pin and shaft connections. But that's a rarity. More often than not you're going to get a hack job out the gate. And probably an attitude too. But that's the way it goes in pool. If you started playing pool ,welcome to hell.
Great video. I'm just to shooting with smaller tips. And prefer that. I just bout the 11.8
Thank you, and glad you were able to buy one. When I last looked, they were all sold out.
As you use the cue and shafts they get easier to take apart.
Very much thank youuuu and an hugsky from bohemian forest. i appreciate your voice, unsensational flow and your attitude.
You could help me and therefor I change my order to the smaller shaft tomorrow…
Heya..them snooker players use even smaller Pomeranzen and I like to real focus on where I am pointing to.
Hugs . Thankfully sincerely yours, Christopher.
I'm currently using a 12.4mm Local Made CF shaft and considering the CT 11.8, i have heard many opinions on the pros and cons, some people say its harder to pot balls with smaller diameter shafts, some people say otherwise. Can someone tell me pros & cons of using an 11.8 coming from a 12.4? Thanks.
Where online did you find these? I want the walnut with linen wrap but can't find that with a 11.8 shaft
Great video! Just wondering if there's any difference in the weight balance of these two shaft? I mean shaft only when it was not connected to the butt. I used to play with predator revo but the revo has a forward balance that makes the tip too heavy. So i'm thinking to switch to cynergy if it has better shaft balance(balance point closer to the joint).
Around the 8:48 mark, the center of balance on the 12.5 is further toward the front but not by much. The 11.8 would have the balance closer to the joint but in all honesty I did not notice any difference between the two.
HE SAYS THE 11.8 FEELS LIGHTER. OF COURSE, IT IS LESS MATERIAL.
I feel the smaller tip looses accuracy the longer distance shots. I have 11.7 and 12.25 tips. I had the 12.5 but I like the smaller tips for shorter distance shooting.
Here in our place lots of player love carbon shaft and very expensive cue, i only used house cue and they cant beat me. Kidding aside when i borrow there cue i can feel the difference between maple and carbon.
Did you notice any swirl marks / micro scratch on the no wrap butt only by using it regularly over time?
Do the linen wraps not exist anymore? Seems like i only see leather or no wrap for gen 2..
I went from a pure x that I bought well over 10 years ago to a gen 1 cynergy svb. I feel like I went from driving a VW to a Lexus.
Not only find it but how are you going to play with it for "a while" to decide?
I seen you have a champion glove. My first cue is a champion dragon 11.75 21oz. It was cool seing your comparison on these cuetecs. Once I improve as a player, i may consider upgrading to a cf shaft. As of now, i would just be missing with an expensive cue rather than a cheap cue lol
You are spot on, improving techniques is more important and is something I am working on myself at the moment.
*_EVERYONE IS BUYING 11.8MM SHAFTS SINCE SVB SAYS HE PLAYS WITH 11.8 BUT REMEMBER HE ALSO SAYS HE PLAYS WITH THE 12.5 AND 12.9 AS HE HAS ALL 3 SIZES IN HIS CUE CASE._*
ISNT THE 11.8MM TOO SMALL TO FEEL IN BRIDGE. WOULD IMAGINE HAVE TO MODIFY YOUR FINGER BRIDGE TO HOLD A SMALL DIAMETER. COMING FROM 12.7 WOOD. REMEMBER WHEN 12.75MM , 314 WAS THE BIG THING!
I wonder how it would feel the 11.8 21oz
I noticed the practice cue ball in this video. Which brand is that? I've been looking for one like that with concentric circles. Thanks.
It's the Aramith Jim Rempe training ball.
"Tacky" is a very appropriate word.
Love my Cynergy with a Predator Ikon butt!!
13mm would be the best cue tip diameter because You will still reshape the tip to around 12.75. Trust Me on This. I fix the cue tip of the pros. but still Your preference and choice though.
The video is nice and have an idea what cf u choose..
Thank you, I didn't see any other videos directly comparing the two so hope it helps many!
I just saw a 10.5 😮
Any video on that?
This is definitely for snooker balls or smaller pool balls, so a direct comparison with the 12.5 of 11.8 is not really valid. The taper is different as well. Yes, I would be interested to see a review as well though.
11.8 or 10.5 all day
Will this shaft fit nicely on predator butt?
How much did they cost
5 dolla
Pool dawg has a 60 day try and return policy on shafts. Seyberts has 30.
That is true!
Fort Worth Billiards has lots of CUETEC in stock.
Good to see the cues, but too many sentences spoken in the form of a question.
Can you sell me one of these if you finished the review? I traveled to UK with my mom for medical treatment and I've brought my cue with me here to play however during the movement of luggage I lost it in a taxi, so I lost my favorite cue here in london even though i've never even played here, its like I brought my cue here to losse it...its shitty story and I want to try the cuetec with the 12.5 cynergy if u can depart and not need it, pls let me know thanks.
wet with rubbing alcohol . Not water on the comment down below.
Why does everything sound like a question with this guy? Made it extremely hard to watch!?!?!??
It's Canadian??
I used to work in a US call center and always noticed this from the Latina women who called in. He ends every sentence on an upturned note, so maybe he is Latino. From a woman it's kind of cute, but from a guy not so much lol. Makes it sound like he's not confident in what he's saying. Great video though it made me decision easier.
Your closed bridge is wide open bro! To each their own.
But please for the love of God, stop saying EXSPECIALLY.