So, my friend, i study architecture and i really really want to say thank you for this awesome tutorial. Really really useful. I'm definately going to use these technics in one of my projects. Thanks
I like your turorials. Very helpful but please use an exterenal mic of better quality. The quality and level of sound is very poor and low. Thank you for posting though ;)
Great video. Anyone who is having the problem of not everywhere being solid, make sure you JOIN the surfaces instead of GROUP. A simple command which makes a huge difference.
ı wanna say to thanks u for ur presentation, ı am a architecture student and our teachers are so interested in rhino and they want to see modelling our projects on rhino so this video is incredibly beneficial
good one and very well explained....since i am new with this software could you do a video on all the tools relevant to architecture modelling, like 2d documentation, 3d model building, rendering etc to make your channel one stop point , i know its lot to ask but if you could it would be very helpful. and off course will wait for your next video
Hello and thank you for great tutorial,just please make sure your other videos the sound quality is better )) ,my Volume is the top notch and barely can hear you. good Video thanks
Thanks for your tutorial. I just get a problem after ExtrudeCrv that some of the pieces with thickness are not in solid. I just try to use cap-fail, planarcrv on both side-fail(seems like the curve is in segments), even patch-fail. But one of their surface is created by curve boolean, others can not. Is there any suggestion to fix the trouble?
Man thanks a lot for this very useful tuto ! I just got a little issue.. after triming the circles onto the surface the curves appeared segmented so impossible to loft or blend. Can someone help ?
great tutorial..but I have this problem that I am not able to join the contour lines and group them ..when I press the command join the selection goes off? I tried to see the command in the video..it doesn't show anything? could you suggest where is the problem
This tutorial is awesome! I’m just having a bit of an issue when offsetting the surface. There are some parts in which it doesn’t offset and I can’t work out what the issue is.
Hi, Abhinav Goyal love this video very helpful! Just wondering how I would make this into a laser cut flat file, is there a particular way to do this?? would love to find out :))
Hi Sir, I have encountered a situation where there is no isocurve shown in the TOP view that makes me could not trim the line within the eclipse. May I know what the problem is?
When I do the Rebuild command, after I click OK all the control points disappear without giving me the chance to rebuild the surface. How do I fix this issue?
bro thank u so much for ur effort in this video...but I have a problem with making contour..when I implement the contour tool I had some empty surface and some of them are solid ..what is the problem ?? u know ??
Hi, It happens when the geometry or object is not clean. you have to be careful then you are blending two different surfaces. add cross sections if you have to. the resultant surface should not overlap or have any gap. you can to a surface check surface>edgetools>showedges for poly-surface objects.
first thanks for video :) and when you click on ellipse or circle arrows appear but when i click on those arrow things doesnt appear do u have any idea about it ?
zenkyumaestro.blogspot.com/2012/10/sevillas-gigantic-new-waffle-in-sky.html?m=1 This is a real example. This tutorial does not cover the engineering aspect of it. That depends on scale and budget of the project.
So, my friend, i study architecture and i really really want to say thank you for this awesome tutorial. Really really useful. I'm definately going to use these technics in one of my projects. Thanks
Ntua ? :D
Nope, University of Patras
I like your turorials. Very helpful but please use an exterenal mic of better quality. The quality and level of sound is very poor and low. Thank you for posting though ;)
sorry about audio quality, will take care next time
Great video. Anyone who is having the problem of not everywhere being solid, make sure you JOIN the surfaces instead of GROUP. A simple command which makes a huge difference.
i am unable to join rhino 6
if any one else is unable to join the curves just cap them after extrusion you will get same result
Your tutorials is great! Thanks for posting and sharing it!
thank you for the tutorial! the length of the video is not too long and the tutorial is easy to follow. keep the tutorials coming please! :)
This is AMAZING! Well done bro!
love this.
give us more! you're great
Doctor says my hearing was ok, then I show him this video. ;) Thank you though!
This video is for Audiophiles ;)
You've just saved our uni project. Thank you for this tutorial
+Harrison I am glad... you can contact me for any further help!
ı wanna say to thanks u for ur presentation, ı am a architecture student and our teachers are so interested in rhino and they want to see modelling our projects on rhino so this video is incredibly beneficial
Thankyou ;)
Love it man thanks please do more you are the only person that is easy to understand what you are doing amazing man thanks
Very thorough and easy to follow and understand. Thank you.
You are just amazing, thank you 1000 times
Nice work man....rhino tutorial from an Indian......great goin' good job.
Great tutorials!! keep posting! your methods are very good! super easy to understand!
Where were you when I had to do this last spring! it took me hours to figure out :/ Im glad this is here now. Such a good workflow.
Daniel Rodriguez thankyou. next time send in your quarries, let's make something more interesting
Incredibly helpful, hope you to upload more of these...
Hey! Awesome tutorial, thanks so much! Please keep on making these great vids!
this video saved my life 😌
thankyouuuuuuuuuuuuu sooo much for this
you are life saver
Great work! Will be following you!
This is such a helpful video! Thank you so much for this tutorial :)
brilliant！thats what i want. u make it in a simple way，without using grasshopper. great
good one and very well explained....since i am new with this software could you do a video on all the tools relevant to architecture modelling, like 2d documentation, 3d model building, rendering etc to make your channel one stop point , i know its lot to ask but if you could it would be very helpful. and off course will wait for your next video
Great one Dear like sixer in cricket.
I like your tutorials very much..
This was super helpful. Turning up the gain on the mic would make it easier to hear, but the lesson was well done.
sorry about audio quality, will take care next time
Great tutorial! helped me to build the model so quickly
thankyou sir... this video is very helpful in learning rhino......... pls keep posting such videos...!!! god bless you
CAN'T HEAR YOU! SPEAK LOUDER PLEASE!
Abhinav bhai thanks bt next time volume thoda high
Very very nice! Well done!
This was very helpful ! Well done explained ! Thank you !
OMG! Thank you SO MUCH!
how did you join the curves after contour?
AMAZING TUTORIAL... THANKS A LOT
you're a legend man!
+Coby Suarez thankyou very much! This is how I learnt. I am just giving back.
like it! so great~very helpful :D
Great tutorial! Can you please increase the volume of the video, I can barely hear you.
C Ford sorry man that's how it got recorded. best you can plug your ear phones in, will be lot better.
sorry about audio quality, will take care next time
Helpful tutorial how would you continue the waffle of the vertical tube, ( so the contours continue till the ground) .Thank you
Thank you so much you make it like a piece of Waffle
Actualy ı cant not hear you nevertheless you are perfect for me . thank you so much. please continuation
You'r really helpfull guy. I'm thankful to you very much.
Amazing Tutorial!!!! thankyou
thank you ! great an easy to follow
Best tutorial ever
Very helpful . Thank you for the hard work. Just a small comment tho. Get a better mic cuz it was so hard for me listening to your voice.
Superb bro, thank you
hi thank u for the video .... but why is my being extruded in horizontal direction at the end @14.42
Damn! Best tutorial ever, thanks :)
Hello and thank you for great tutorial,just please make sure your other videos the sound quality is better )) ,my Volume is the top notch and barely can hear you.
good Video
thanks
sorry about audio quality, will take care next time
Thanks for your tutorial. I just get a problem after ExtrudeCrv that some of the pieces with thickness are not in solid. I just try to use cap-fail, planarcrv on both side-fail(seems like the curve is in segments), even patch-fail. But one of their surface is created by curve boolean, others can not. Is there any suggestion to fix the trouble?
It would be nice if the like was clear enough to understand anyways thankyou it's a great help
Man thanks a lot for this very useful tuto ! I just got a little issue.. after triming the circles onto the surface the curves appeared segmented so impossible to loft or blend. Can someone help ?
enormous thank you!! :)
great tutorial..but I have this problem that I am not able to join the contour lines and group them ..when I press the command join the selection goes off? I tried to see the command in the video..it doesn't show anything? could you suggest where is the problem
Group them right when you make contour so it can be selected later all together.
had the same problem. grouping worked though
control points were not showing when selecting and hitting enter of the curve
plz can you solve it
I have imported cad 2D outline plan on rhino and am trying the same. After rebuild I am unable to play with the control lines along z axis
amazing!!!!
This tutorial is awesome!
I’m just having a bit of an issue when offsetting the surface. There are some parts in which it doesn’t offset and I can’t work out what the issue is.
My guess is the curvature of surface you have bent is more then offset distance.
This was very helpfull, thank you!
How to obtain the CNC cutting planes of each of the panels?
Hi, Abhinav Goyal love this video very helpful! Just wondering how I would make this into a laser cut flat file, is there a particular way to do this?? would love to find out :))
Hi Sir, I have encountered a situation where there is no isocurve shown in the TOP view that makes me could not trim the line within the eclipse.
May I know what the problem is?
I could not trim the surface within the elipse and can't figure out why either.
thank you at all really great work. i would build simply wood estructures to all my proyects thanks!
Thanks for video
Like liền cho bạn hiền nhé
Great tutorial, thanks!
thank you!!!! you help us so so much
awesome tutorial! thank you
it was really helpful thank you so much
Thank you!
when I blend surafe the two surfaces he selects a single edge ?????
When I do the Rebuild command, after I click OK all the control points disappear without giving me the chance to rebuild the surface. How do I fix this issue?
Hi. Try to explode surface before rebuilding it.
Thank you very much!
Great Tutorial! Thank You...
bro thank u so much for ur effort in this video...but I have a problem with making contour..when I implement the contour tool I had some empty surface and some of them are solid ..what is the problem ?? u know ??
Hi, It happens when the geometry or object is not clean. you have to be careful then you are blending two different surfaces. add cross sections if you have to. the resultant surface should not overlap or have any gap. you can to a surface check surface>edgetools>showedges for poly-surface objects.
thank u so much bro ..I will check it :)
can u send to me your model file..if you have it I could not find my mistakes??? furkankon@gmail.com
It will be better if you mail me your file at abhinav@formforge.co if will check it for errors
Really useful, thank you!
So helpful! Thanks a lot!
Excellent!
was great to know first
first thanks for video :) and when you click on ellipse or circle arrows appear but when i click on those arrow things doesnt appear do u have any idea about it ?
+Oğuzhan Gür this is bit unusual. Make sure your gumball is on. If you can send me a small videoclip of this may be I could help.
owesome job thanks
Thank you so much!!!
Thank you so much
Hi it is easy to design, but is it feasible, please let me know thanks.
zenkyumaestro.blogspot.com/2012/10/sevillas-gigantic-new-waffle-in-sky.html?m=1
This is a real example. This tutorial does not cover the engineering aspect of it. That depends on scale and budget of the project.
hello i m nt getting that arrow u have with arrow of green yellow blue hw to get
sanjeev krishnan find gumball button(where osnap is)
tq sir
Amazed
THANK YOU
hello, I cannot offset my surace for some reason
Try rebuilding it.
Can't hear your voice properly! :'(you make lovelyy videos, but pleasee pleasee tryy using a mic, you werent audible ag all :'(
Wtf I loved it
amazing
Worked, thx
can't hear you.
The sound is low !!
awesome
Eres el mejor
Thx a lot very helpful
thnk you