Yeaaaaaa about that , I don’t find it as much fun going around . But ya my 350 kodiak will go to the same destination as my renegade , but it’s not going through the same holes .
Those are quite the machines. I have a 570 SPortsman with a 2' lift and 27s on it. I am on 100 acres here in ME. My mud is alot of clay though....sucks trying to wash it off. It sticks and leaves a permanent stain on the plastic. Great video guys! Enjoy the rides!
When the Polaris bell to gets wet simply put the machine in neutral hold it at about 3000 RPM is for 3 or 4 minutes it will dry the belt and then drive out of the hole
I was finally able to get a new ride to replace the RZR I had that I had to sell. I couldn’t a new RZR or anything fancy like these. All I oiled manage was a Sportsman 450. It at least gets me out of the house.
I got an 04 sportsman 500 recently, you're 450 is better in every way than my 500 lol There's nothing wrong with not having the biggest and baddest, nobody really cares. Go out, have fun and that's all that matters
Hell buddy all I got is a 86 Yamaha Moto 4 225 special edition that's been in the family since new, gets me outta the house and riding so I don't care. I get stuck a whole hellava lot but thats ok, thats what the winch is for lol
David Ash idk cuz I’m still driving a 86 Honda trx350 same year I was born still on the road today how many can am will be 34 years old and still running?
I love it when people compare a honda to a xxc or scrambler. A civic or corolla will last forever, but a mustang or corvette will be alot more fun to use. Ones a boring dependable machine, the other is a high performance that will give you alot more fun.
it would be interesting to see a 1000cc straight axle, bc straight axles just dont break, you would had to do something really stupud to break one. and with 1000cc it would turn big tires fine so you could put some big tires to give you the extra ground clearance. and if you wanted too imagine having a axle paddle on a can am
Smaller lighter machine. Less relax. Less drag. More traction. I’ve taken an 05 scrambler 500 with factory tires against a bombardier and grizzly with 24” superswampers and won every time. Ride the rear through and the front out. Less time. Less sink. Less stuck.
You know the way it sucks down when you try to pull or winch it in? I’m not a welder but if you make a telescoping square tube post that looks like an upside down “T” that is say 4 feet tall with a small wheel to allow the winch cable to ride on. Instead of sucking further down it gets that point higher than the winch it could helps pull up and out. At least in Theory. Could be a nice add to the tools while on long trails. All I ask is if it works and you start selling them hook me up with one. If it doe# real we’ll hook me up with a nice rig to match, Lol! Safe riding fellas!
omg love the conversations, you guys are so like me and my buddies. love the "eh's" like the hanson Brothers...old school hockey...just hit the throtlte eh.
Looks like someone dumped some Polaris eatin quick sand there on the trail! Interesting lesson to learn about crap in the wheels... Bumer for the Polaris dude, but a great video!
Deep hole there were obviously trying to fill in to access the lines, You could tell they were poking logs in to test its depth. very much like quick sand eh. Cheers.
I own both machines. Drama with both when pushing the limit. The rider of the Polaris was leading the pack. ( the Ginny pig). This could have happen to any of those machines. The Polaris ( lead driver) was driving like a cuteee pie. Hit the gas ang grow a pair and if you notice something wrong; investigate. Your buddies even mentioned prior to the machine breaking an axle..hit the gas and drive with your thumb. Yes the Honda is reliable and is good for the farm. I own the rubicon as well. Perfect for working and some fun, not to the point extreme of what the XMR OR THE HIGH LIFTER.
I had the exact same issue, was stuck in water up to the seat, got hauled out and found out the rocks tore the shit out of my rim, looks like someone took a can opener to the thing.
That's a shit deal... but maybe if he would just let it rip that my not have happen. Big fan of you two guys... great video look forward to see the conclusion
My 05 Honda 500 foot shift, shaft drive would of made it there and back around you guys..... with me grabbing that back rack right the way though tho lol
I have a high lifter put regular tires on it and tune it on a dyno. And race people with it. I think its one of the fastest drag bikes there is 0-50mph. Its a good trail bike in the north east u cant go over 50 on most of the trails you will die they are way to tight trees right next you. I have portals on my high lifter so i have to take them off too race its way to low with small tires on. Its a 160 percent gear reduction with portals. That is not a high lifter it is just a polaris with snorkles and tires. You need the internal gear reduction and the portal gear reduction.
That doesn't look like a true high lifter edition??? The highlifter that you buy straight from polaris doesn't have snorkels, just higher intakes/belt exhaust & relocated fans..... either way, it could have happened to any bike out there if it was truly a rock that got caught.. What was the final diagnosis to the cause of the broken axle??
Verdict is that the Polaris clutch sure does grip. It was a rock lodged in between caliper and rim. Twisted the axle and bent both arms on the left rear, Before the belt started to slip. Wow, eh. Just bad luck
I got a 650 Suz, with about 3000 miles,and the frame is like me a little bent,would like to do something with the moter,any ideals, thought about in a boat of something,,let me no if you get a brain storm,,,gb
I see y'all ride mostly can ams, I have 2 can ams was debating trading my 570 for something bigger. Debating between a sportsman highlifter or another xmr any reasons y'all don't ride polaris?
Tires are too big and heavy, and all that power not a good combo. You also should change your diff. Fluid annually or biannually . It's a small amount of fluid and I find the diff does need alot more break in fluid change intervals judging from the amount of debris in it.
Lot of haters in the comments. Just so everyone knows, can ams break too. Yall acting like can am is invincible. If someone prefers polaris why you gotta bash on em? Fuck it's about going out with your buds and having fun. Everyone needs to stop with all the hate.
My favorite part is the quad with the stock looking tires doin just fine :) Finding a way around is just as fun and twice as cheap!
Yeaaaaaa about that , I don’t find it as much fun going around . But ya my 350 kodiak will go to the same destination as my renegade , but it’s not going through the same holes .
Those are quite the machines. I have a 570 SPortsman with a 2' lift and 27s on it. I am on 100 acres here in ME. My mud is alot of clay though....sucks trying to wash it off. It sticks and leaves a permanent stain on the plastic. Great video guys! Enjoy the rides!
try tire shine on the plastic when done claenup.
When the Polaris bell to gets wet simply put the machine in neutral hold it at about 3000 RPM is for 3 or 4 minutes it will dry the belt and then drive out of the hole
I was finally able to get a new ride to replace the RZR I had that I had to sell. I couldn’t a new RZR or anything fancy like these. All I oiled manage was a Sportsman 450. It at least gets me out of the house.
Nothing wrong with that my friend. Any quad is better then no quad.
i got a grizzly700 the other day, couldnt be happier. my wife has a sportsman 550. those little sportsmans go like snot.
I got an 04 sportsman 500 recently, you're 450 is better in every way than my 500 lol There's nothing wrong with not having the biggest and baddest, nobody really cares. Go out, have fun and that's all that matters
Hell buddy all I got is a 86 Yamaha Moto 4 225 special edition that's been in the family since new, gets me outta the house and riding so I don't care. I get stuck a whole hellava lot but thats ok, thats what the winch is for lol
This is in Cloyne, Ontario. I’ve worked on those powerlines!
it's great there in the USA, you have fun, I ask my dad about 5L of gas and you check what will break first FANTASITC
Bad day in the trails is better than a good day at work! Yall boys havin too much damn fun out there lol.
TOOL intro! Can Am baby!! Love my Renegade Xxc
David Ash idk cuz I’m still driving a 86 Honda trx350 same year I was born still on the road today how many can am will be 34 years old and still running?
pitbull lover ...a lot of you just take care of them
I love it when people compare a honda to a xxc or scrambler. A civic or corolla will last forever, but a mustang or corvette will be alot more fun to use. Ones a boring dependable machine, the other is a high performance that will give you alot more fun.
it would be interesting to see a 1000cc straight axle, bc straight axles just dont break, you would had to do something really stupud to break one. and with 1000cc it would turn big tires fine so you could put some big tires to give you the extra ground clearance. and if you wanted too imagine having a axle paddle on a can am
Can-Am, pulling broken Polaris out of the mud since always.
lol
Trying to watch you guys hook that winch into that tow ring was fricken hilarious.
Funny eh, Used to fit then I switched hooks. LOL
eh TV 🤣🤣
Awsome video man cheers from Finland
That's awesome, cheers
you guys are the most canadian canadians i have ever heard
Hahaha, right on.
Man, That's a tough break for the HighLifter. Still a Polaris fan>>>
Yeah was a shitty break for sure. Way she goes, eh. Sucks that it happen the first rip out with the tires and lift.
Smaller lighter machine. Less relax. Less drag. More traction. I’ve taken an 05 scrambler 500 with factory tires against a bombardier and grizzly with 24” superswampers and won every time. Ride the rear through and the front out. Less time. Less sink. Less stuck.
You know the way it sucks down when you try to pull or winch it in? I’m not a welder but if you make a telescoping square tube post that looks like an upside down “T” that is say 4 feet tall with a small wheel to allow the winch cable to ride on. Instead of sucking further down it gets that point higher than the winch it could helps pull up and out. At least in Theory. Could be a nice add to the tools while on long trails. All I ask is if it works and you start selling them hook me up with one. If it doe# real we’ll hook me up with a nice rig to match, Lol! Safe riding fellas!
That's a very nice road and nice 4 wheelers thumps up
Quite the little spot eh.
eh TV yep
How did you get that thing out of there since you had to go through alot of holes and he only had 3 wheel drive.
Easy
Good to see
Its always a Polaris being towed out of the woods for something!
I had a rock break a wheel from inside. Aluminum bead-locks. Luckily it was bead-locks so I could finish :D
btw it was a Honda so it didn't have the power to break the axle
I'll post a pic of the axle for ya's on the community page, he also broke a hole in the rim. 750$ later sh'e good to go.
eh TV yikes, that sucks!
Crazy..crappy issue to have.
"he's just scared ehh"
What do u use to record, the sound quality is incredible
We use the Hero 5 black's with double layerd audio from both cams.
eh TV I think he was being sarcastic
That's Polarious!
Hahaha
@@ehTV1000 yeah un french is a Polarisque lol
STV: Some Terrain Vehicle
REALLY COOL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ima canam fan ,, nice to see the Polaris first to go 😆
Just drive in it bud.. Well get you some then. Go on big man. Lets see it.
Polaris no good. Great video man!
Thanks!
Man that was quite the adventure you boys had there. Too bad about your bros machine. Now we know who broke first! Thanks for sharing buddy!
Can't wait to see him turn it loose on the Polaris
It's getting another upgrade this week that will help release some of that power it's holding back. Stay tuned
eh TV man I hope he does the pinion upgrade if he hasn't
Nicholas Smith the 18 models have an upgraded pinion plate
Calisthenics & Lifestyle even the 850 highlifters?
LSX Vette every Polaris atv got one
I see the NOS atvs ı love you eh TV
It dont have snorkel and engine never stalls lol
How engine dont stalls you dont have snorkel???
Ước j có chiếc xe như này để đi câu cá, vượt mọi địa hình thì vui biết bao nhiêu
Iv winched out a highlifter at the atv park same thing locked up rear wheel. we found a rock in the brake rotor
I recall that, seems to be a regular issue. Must be the deep dish rims.
omg love the conversations, you guys are so like me and my buddies. love the "eh's" like the hanson Brothers...old school hockey...just hit the throtlte eh.
Hahaha, yup that's about the size of it eh.
Strange area. I don't think that's the best material to build a road through swampy ground. Shame about the Polaris. Anyhow, nice vid and thumbs up.
I agree big crush rock would be much better. Quick sand is all they acomplished.
Looks like someone dumped some Polaris eatin quick sand there on the trail! Interesting lesson to learn about crap in the wheels... Bumer for the Polaris dude, but a great video!
Deep hole there were obviously trying to fill in to access the lines, You could tell they were poking logs in to test its depth. very much like quick sand eh. Cheers.
Jdk
Faine
🏁🔧🔨🔩🏆
Jjuf
@@katarzynawilk8490 i
EH TV what's the next up grade your thinking about?.... Love the videos!
ECU reflash
Egegdfhwfbdb hftsfo9yf
Ggssgmgert nie dcvs
Tgbvcfg cfh+knbgy6
That waz painful 2watch,
Made ne wanna scratch my eyes out! SumPeoplesKids🇺🇸merica🇺🇸
Happens to everyone 🤷🏽♂️
Sure does, glad it wasn't me this time.
In jjhb de dnn
I own both machines. Drama with both when pushing the limit. The rider of the Polaris was leading the pack. ( the Ginny pig). This could have happen to any of those machines. The Polaris ( lead driver) was driving like a cuteee pie. Hit the gas ang grow a pair and if you notice something wrong; investigate. Your buddies even mentioned prior to the machine breaking an axle..hit the gas and drive with your thumb. Yes the Honda is reliable and is good for the farm. I own the rubicon as well. Perfect for working and some fun, not to the point extreme of what the XMR OR THE HIGH LIFTER.
Awesome video it just looked like crunchy peanut butter LOL definitely some rough riding conditions
Concrete texture and large stones.
That sucks tough break. I had a Polaris not long ago had major problems with axels. Maybe some turner axels will help.
Or Demons
Muy bueno estas máquinas
Yo quiero una.😊😊
carlos macas se chigan muy prounto es mejor Yamaha y honda
I had the exact same issue, was stuck in water up to the seat, got hauled out and found out the rocks tore the shit out of my rim, looks like someone took a can opener to the thing.
Same thing here, he destoyed the rim also.
Me *reads the title* yeah the Polaris 100%
Haven't watched the video yet but can am
Haha, wrong
How much do these costs?
hi please the atv you ave is the best i wish i had 1 like your know
11:00 you can hear it
Stick the cable in and then lock it with the hook boys!
Keep the videos going
That's a shit deal... but maybe if he would just let it rip that my not have happen. Big fan of you two guys... great video look forward to see the conclusion
Thx buddy, bum luck was the factor on this one. But when he breaks ligitiment, We'll feed it to him eh. Hahahahaha
Have to take the bad with the good
should have bought Cecco racing pinion cover. should have been the first upgrade before those tires
xXJBrutalXx 2018 come with a steel pinion plate upgrade on it
Good product, but yeah this model is supposed to had upgraded it.
Lol the real boys Honda boys don't have "belt" issues
Recore el país entero
Hail honda
Sean Khan gghhfjiiiiiii
You know what’s good #HONDA
My Honda 300 can do just as much or better. Suck it two time and still runs like a champ
I just noticed Trenton listed during intro. You guys must be part of the EOTA. I'm Northumberland.
What do you y’all use to clean the bikes?
Lots of scrubing
Can am in simply a way more durable brand and last longer. Polaris uses cheap parts but still have nice Atvs out there.
I had a can am and I was fixing it more than I was riding
They both seem to need a lot of maintenance. all that horsepower and weight is hard on components that size. The side by sides are even worse
my scrambler has over 5500km on it now and ive only ever done regular maintenance
How many cost of it is and from where you have buy it
Hey what mods have you done to yours I want to wake mines up a little.
Watch the latest upload on the channel, It covers all the add-on's.
Tough break Troy! it looked like brown cement!
Bigger stones though. Hahaha
My 05 Honda 500 foot shift, shaft drive would of made it there and back around you guys..... with me grabbing that back rack right the way though tho lol
Man those quads are the shit
Do a walk around of the popo and the triple black one
Sure, when the moment presents itself I will.
He should have got a can am!
Can am C stands for Can . a stands for am .n stands for needs . a stands for a . m stands for mechanic. Can am needs a mechanic .
Hello my friend. How are you. What happened to our friend's polaris?
Well thx, broken axle and a hole in the rim
eh TV. What a pity, it seems to be new the polaris.
Luan Possenti Melnek Jkkkkkk veiaoo
And this is why I ride canned ham
😂😂😂😂😂😂😂😂😂
Colton Winkel this is why I don’t trust people with can ams
I have a high lifter put regular tires on it and tune it on a dyno. And race people with it. I think its one of the fastest drag bikes there is 0-50mph. Its a good trail bike in the north east u cant go over 50 on most of the trails you will die they are way to tight trees right next you. I have portals on my high lifter so i have to take them off too race its way to low with small tires on. Its a 160 percent gear reduction with portals. That is not a high lifter it is just a polaris with snorkles and tires. You need the internal gear reduction and the portal gear reduction.
Wow eh. That aboat crazy eh
That doesn't look like a true high lifter edition??? The highlifter that you buy straight from polaris doesn't have snorkels, just higher intakes/belt exhaust & relocated fans..... either way, it could have happened to any bike out there if it was truly a rock that got caught..
What was the final diagnosis to the cause of the broken axle??
Verdict is that the Polaris clutch sure does grip. It was a rock lodged in between caliper and rim. Twisted the axle and bent both arms on the left rear, Before the belt started to slip. Wow, eh. Just bad luck
Should've had a Renegade! You tell him Job lol. What are Brothers for? Lol
Hahaha, Got to give him a hard time eh. What are brothers for. LOL
Who’s on the Highlifter? What’s his channel?
My brother, He does have an old channel called Grizzly Tracker
eh TV what kind of fuel mileage does he get on his Highlifter? Mine seems to suck fuel down!
I got a 650 Suz, with about 3000 miles,and the frame is like me a little bent,would like to do something with the moter,any ideals, thought about in a boat of something,,let me no if you get a brain storm,,,gb
where abouts are you guys in ont
Kingston area
I have a question, how many miles per hour can you go with a 4 wheeler?
That depends on the type of fourwheeler. That’s an incredibly broad question
that's Polaris for ya
Super!
I see y'all ride mostly can ams, I have 2 can ams was debating trading my 570 for something bigger. Debating between a sportsman highlifter or another xmr any reasons y'all don't ride polaris?
Some of us do, Been more and more Polaris's joining the fleet in the last yr. I prefer the power delivery of the Can Am my self. But both are wicked.
We’re in ol Canada, eh?
No place like home, Ont
I remember back when you had 6K subscribers
Right on, thx for the support eh
That's what you get for buying a Polaris can am is the way to go 😂😂😂😂
Great video
Thx Amber
Hey my step dad just got a new Polaris sport men-four wheeler today eh
Right on
Lol. Watch out for the belt. Bad design.
Where can you get ECU Flashed in Toronto 2019 Can Am 1000 xmr outlander
okay what quad bike do you have please
i will look for some for you were is your place please
would you look at that, a broken polaris. what are the chances....
Is the Polaris rider a new rider? Looks like his first time out.
Hahahaha, New to a Po Po maybe. used to have the Grizz with the 5 1/2 Gorrila lift
I might be getting a 1000 cc forweller If I dont get that then its probably going to be 800 or 600 cc on a diffrent one also its going go be a Polaris
broken axle!? GOT DAMN
Tires are too big and heavy, and all that power not a good combo. You also should change your diff. Fluid annually or biannually . It's a small amount of fluid and I find the diff does need alot more break in fluid change intervals judging from the amount of debris in it.
are there tow services in the woods ?
LOL if ya can get signal. Your buddies, eh.
I see Murphy made a trip with that guy
Roses are red vile ‘‘tis are blue go to 6:42
Good lunch time ham sandwich and. Ehhhhhh tv video lol
Hahaha, right on buddy
Nice video!
Thx man
Playing with the big boys isnt cheap lol
No sir
Lot of haters in the comments. Just so everyone knows, can ams break too. Yall acting like can am is invincible. If someone prefers polaris why you gotta bash on em? Fuck it's about going out with your buds and having fun. Everyone needs to stop with all the hate.
Man I wonder if theses guys are Canadian? 😂😂😂
Chrissy D that is what I was thinking (A)
I am Canadian
Like the car that u have.
Yes they are the lisence plate says ontario
eh?
its pretty hard to pull a bike with a lock tire eh
Especially when that tire is buried!
Can am for life
Ben Thomas... Why, because of relyability?
LMAO, I doubt it.