Quick Start Guide | bObsweep Standard™
Вставка
- Опубліковано 29 жов 2024
- Congratulations on your newborn Bob.
Bob is ready to rid your floors of dust and grime with just these few quick steps. Everything Bob needs for his first cleaning cycle is right in his box.
Each box contains:
● Bob himself,
● his charging station and adapter,
● his remote,
● his mop attachment and two microfiber mopping cloths,
● 2 side brushes,
● a spare main brush,
● a spare filter,
● blindfold stickers,
● a bag of screws,
● a screwdriver,
● Bob’s cleaning tool,
● your Owner’s Manual and Quick Start Guide,
● and your Warranty Card.
Install Bob’s side brush and he will capture hair and dust gathered along the edges of your home. To install Bob’s side brush, you will need the following materials from his box: a side brush, a screwdriver, and a dark grey screw. Flip Bob onto a flat surface and use the
screwdriver and screw to secure the side brush into the empty socket on Bob’s underside. Keep the remaining side brush as a spare.
After you’ve installed Bob’s side brush, make sure Bob is fully charged before he begins his first cleaning cycle. Plug Bob’s power adapter into the side of his charging station, and place the station on a hard, flat surface with its back against a wall. Leave plenty of space around the station so that Bob can easily access it. To set Bob to charge, place him on his station with the silver plates on his underside lined up with the charging nodes on his station. Alternatively, you may charge Bob by plugging the power adapter directly into the inlet on his side (remove the plastic cover of the power switch).
will remain still. Bob automatically returns to his charging station when at 15% battery life. Once Bob is fully charged, he is ready to begin cleaning.
More of Bob Standard's how-to videos:
www.bobsweep.com
To learn more about bObsweep products, visit www.bobsweep.com.