I was just thinking that's a slightly misleading title ,i mean you can get #ULEB stoves that have downward flame flow using secondary chamber that you can switch to once the fire is up to temperature. The difference here with my stove is that the triangle can run a gravity flame from ignition, the system does not need to be pre heated from a primary burn chamber,like an ultra low emissions burner. The triangle stove in this video has had a few upgrades since filming, once I move into my tipi I will share my latest designs. Please subscribe to help grow this channel, my goal is to help bring clean air technology to the world.
@flattail thanks very much, yeah, that's the newzealand tui bird,they are amazing. It sounds like some complex alien communication sometimes. Some of their bird calls human ears and can't hear.
Looks very cool, have been reading and thinking about building wood gasification unit with an upside down combustionchamber to heat water. I subscribed and am curious about the inner workings of your stove. And also the design looks great! I subscribed and are looking forward to future video's. Greetings from Hungary.
Good to have you here. I am building a water heating rocket stove for my out side spa bath currently. I have built one with a water heater already, but it was uncontrollable scary 💣 . haha, yeah I think I have a better plan now.
Thank you! I can imagine it can be pretty wild and difficult to harness. I was thinking about using something like it to heat my greenhouse and use enough mass to heat so I can keep it under control.
Yeah ,I am definitely brushing up on my plumbing skills before attempting another one . Had a couple of nasty steam burns ,I was smart enough to have a pressure release pipe installed ,so I did not blow up, haha but yeah definitely i failed on the connections 🙃. I think I found out one thing though, rocketstoves heat water more efficiently than standard wet backs ,faster heat time in testing also.
@@PYROFLOWROCKETSTOVES Yeah never underestimate the power of steam😅. I distill my own alcohol in a still I've build out of an old copper boiler, one thing I learned is that I put a pressure release valve on everything that gets or could get pressurised haha, wouldn't want to blow up my shed. I've seen a couple of rocketstove type waterheaters on UA-cam but they where always big, industrial looking and bulky. I would like to build it small and efficient amd with the limited tools I have.
@eh6971 yeah let's build something cool, 1st I need to clear some land ,build four walls and a roof to put my welder into haha.I don't think my canvas tipi would hold up well vrs welding sparks. Maybe I will make a Sunny day outside welding video in coming weeks . A shower or bath will be more urgent than welder housing now that I think about it. The Woes
Love the design. Love to make it a outdoor pellet burner, with a sand heat storage, and water heating to drive my floor radiant heat. Weld it yourself?
Thankyou., yes I have a mig welder ,welded that creation up, that one took ages to get to work properly its been taken apart a few times and reconfigured. I'm pretty sure I will have it in peices once more lol
I was just thinking that's a slightly misleading title ,i mean you can get #ULEB stoves that have downward flame flow using secondary chamber that you can switch to once the fire is up to temperature. The difference here with my stove is that the triangle can run a gravity flame from ignition, the system does not need to be pre heated from a primary burn chamber,like an ultra low emissions burner. The triangle stove in this video has had a few upgrades since filming, once I move into my tipi I will share my latest designs.
Please subscribe to help grow this channel, my goal is to help bring clean air technology to the world.
Love the stove, and I love the unique bird call--what bird is that?
@flattail thanks very much, yeah, that's the newzealand tui bird,they are amazing. It sounds like some complex alien communication sometimes. Some of their bird calls human ears and can't hear.
Looks very cool, have been reading and thinking about building wood gasification unit with an upside down combustionchamber to heat water.
I subscribed and am curious about the inner workings of your stove.
And also the design looks great!
I subscribed and are looking forward to future video's.
Greetings from Hungary.
Good to have you here.
I am building a water heating rocket stove for my out side spa bath currently. I have built one with a water heater already, but it was uncontrollable scary 💣
. haha, yeah I think I have a better plan now.
Thank you!
I can imagine it can be pretty wild and difficult to harness.
I was thinking about using something like it to heat my greenhouse and use enough mass to heat so I can keep it under control.
Yeah ,I am definitely brushing up on my plumbing skills before attempting another one . Had a couple of nasty steam burns ,I was smart enough to have a pressure release pipe installed ,so I did not blow up, haha but yeah definitely i failed on the connections 🙃.
I think I found out one thing though, rocketstoves heat water more efficiently than standard wet backs ,faster heat time in testing also.
@@PYROFLOWROCKETSTOVES Yeah never underestimate the power of steam😅.
I distill my own alcohol in a still I've build out of an old copper boiler, one thing I learned is that I put a pressure release valve on everything that gets or could get pressurised haha, wouldn't want to blow up my shed.
I've seen a couple of rocketstove type waterheaters on UA-cam but they where always big, industrial looking and bulky.
I would like to build it small and efficient amd with the limited tools I have.
@eh6971 yeah let's build something cool, 1st I need to clear some land ,build four walls and a roof to put my welder into haha.I don't think my canvas tipi would hold up well vrs welding sparks. Maybe I will make a Sunny day outside welding video in coming weeks . A shower or bath will be more urgent than welder housing now that I think about it.
The Woes
Love the design. Love to make it a outdoor pellet burner, with a sand heat storage, and water heating to drive my floor radiant heat.
Weld it yourself?
Thankyou., yes I have a mig welder ,welded that creation up, that one took ages to get to work properly its been taken apart a few times and reconfigured. I'm pretty sure I will have it in peices once more lol
@@PYROFLOWROCKETSTOVES- Where are you based? Love to get these into a product.
@glennwest267
Newzealand, Goldenbay thanks
Beutiful area.- im in easter USA- Nashville
@@PYROFLOWROCKETSTOVEShow hands off is it once its operational