Aprilia rs4 125cc Service Oil Change + Filter, Air Filter, Spark Plug, Chain Lube and Clutch Cable

Поділитися
Вставка
  • Опубліковано 28 вер 2024
  • Aprilia Rs4 hiflo oil filter amzn.to/3lZhTOh
    Aprilia Rs4 PiperX race air filter amzn.to/2HELD4c
    Aprilia Rs4 iridium spark plug amzn.to/2KDNg3c
    Cheapest Castrol power1 5w40 amzn.to/3725ZwO

КОМЕНТАРІ • 198

  • @BHKG8818
    @BHKG8818 3 роки тому +21

    The most helpful video for this bike especially from someone with so much experience in motorcycles. Thank you so much and stay safe mate!

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому +2

      Thank you really appreciate your feedback. Stay safe too bud 👍

  • @Lanewaymusic
    @Lanewaymusic 3 роки тому +3

    Tried the motul300v and you are correct much smoother and I think an increase in power of 10%. Good tip

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      Result it’s really good I was shocked how much it improved 👍👍

  • @wybevanderveen6327
    @wybevanderveen6327 3 роки тому +1

    Awesome video! i think i can use it for my 50CC version of this bike.

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому +2

      50cc is a 2 stroke so no don’t use the same oil I used it will damage your clutch 👍

    • @wybevanderveen6327
      @wybevanderveen6327 3 роки тому +1

      @@BigBoyzToyz1974 i know, thanks for the heads up but mine goes back to the store today for his first 1000KM maintenance service

  • @Wes.E.
    @Wes.E. Місяць тому +1

    Is the oil pressure light meant to show before you start the bike, as mine is on until I start it up then it goes. It was on all the time at one point but I made sure the rubber hose over the pressure sensor was air tight and seated correctly and it goes off now but is it normal for it to be on and turn off once the bike has started?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  Місяць тому +1

      Yes that is perfect as the oil pressure only gets up to desired pressure once engine has started if it srays on you have a problem with either the pump or pressure switch

    • @Wes.E.
      @Wes.E. Місяць тому +1

      @@BigBoyzToyz1974 Thank you!

  • @OllieR1des125
    @OllieR1des125 4 місяці тому

    Could I get some help here as I’m confused I’ve drained all the oil changed everything and filled it with a 1L bottle but every time it goes well over the max if I push push it in it’s spot on if I screw it in it’s well over so I’m really confused as I’ve only put a litre in?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 місяці тому

      You definitely need to take a reading when it's screwed in if you don't you will overfill and the piston will slap the oil and crank pressure will be too high and blow seals take some back out.

  • @mynameisainsley2207
    @mynameisainsley2207 3 роки тому +1

    Im still quite new with bikes and motors but i did an oilchange yesterday and the oil smelled alot like fuel, is that normal?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому +1

      It depends how much you get blow by small amount of unburnt fuel gets past the rings but should evaporate if oil is very thin and stinks of fuel I would do a compression test to see if it’s leaking 👍

  • @bobloveridge4429
    @bobloveridge4429 3 роки тому +1

    could u do a disc brake replacement vid

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      It’s on the cards for me to upgrade the front disc but it is a straight forward process just bolts on to the wheel no specific or special requirements. But watch this space floating disc is coming soon 👍

  • @nlmbkarma
    @nlmbkarma Рік тому +1

    Hi bit late but hope for a reply, the oil that you linked in a comment above, is that the right oil for the 2016 one? Never done any servicing or anything on a bike before and want to start doing but I can’t find any info on the right oil online it all says different stuff 😅

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  Рік тому +1

      In the book it says get 10w40.. but 5w40 is better as its slightly thinner at start up it gets to the valves and components quicker and at operating temperature its exactly the same viscosity as 10w40...so either can be used but I recommend 5w40 for the above reasons. Rule of thumb you can always go lower with the first number but always use what is recommended for the second number 👍

    • @nlmbkarma
      @nlmbkarma Рік тому

      @@BigBoyzToyz1974 thanks a lot mate

  • @jboofie_
    @jboofie_ 8 місяців тому +1

    Would you be able to to do more videos on the RS4? Cheers J

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  8 місяців тому +1

      Not anymore mate sold it over 2yrs ago.

    • @jboofie_
      @jboofie_ 8 місяців тому +1

      ​@@BigBoyzToyz1974 Thankyou for your fast reply! Ah shame I've still got my RS4 2011 and she's a fast one LOL. Love your videos and very informative. I would know how to do it otherwise as I lost the manual but I'm restoring her as we speak and will make some videos in the next month or so.
      Regards J

  • @bobloveridge4429
    @bobloveridge4429 3 роки тому +1

    Do u check the oil when the engine is hot or cold

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      Never cold after a run leave bike 5 mins then check 👍

  • @jhz1050
    @jhz1050 2 роки тому +1

    Where did u get the clutch cable from mate?

  • @flaschiboi7189
    @flaschiboi7189 2 роки тому +1

    Hi, how do I undo those "pushing things" you mentioned at 0:59?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  2 роки тому

      If they are the original you push the centre in and it will pop out mine are aftermarket you can just grab and pull

    • @flaschiboi7189
      @flaschiboi7189 2 роки тому +1

      @@BigBoyzToyz1974 okey, thank you very much 😁

    • @flaschiboi7189
      @flaschiboi7189 2 роки тому +1

      So here's an image of my clip thingy
      ibb.co/RHbFN3M
      If this helps you determining if it's original or not
      Have a great day :)

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  2 роки тому

      Put small flat head under the edge and lever it up

    • @flaschiboi7189
      @flaschiboi7189 2 роки тому

      @@BigBoyzToyz1974 sorry for bothering you again but will it break so I need new ones or will it gonna be okey?

  • @floralboy8626
    @floralboy8626 3 роки тому +1

    Is your dip stick hard to open? I cant seem to open mine

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      Yes it has been in the past use some pliers to grip it or your motorcycle gloves to get extra grip 👍

    • @floralboy8626
      @floralboy8626 3 роки тому +1

      @@BigBoyzToyz1974 ah thx man. just bought a tuono 125 which has the same engine

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      I’ve got the mx125 engine in my Rs4 same again but red Aprilia logo on clutch cover. 👍

  • @danielarendas6096
    @danielarendas6096 2 роки тому +1

    What is the spark plug tool for? Great video thanks!

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  2 роки тому

      Measure the gap between the electrode and the tip some spark plug gaps are wrong and it effects the engine running quite significantly 👍

  • @leszczu2522
    @leszczu2522 2 роки тому

    You remember how much oil you poured into the engine?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  2 роки тому +2

      1ltr it takes 1200ml but it will keep about 200ml in after emptying

  • @snubspark609
    @snubspark609 4 роки тому +1

    What sprockets do you have ?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому

      Hilka cheap set but really good.

    • @snubspark609
      @snubspark609 4 роки тому

      @@BigBoyzToyz1974 How many teeth?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому

      72 mate 👍

    • @snubspark609
      @snubspark609 4 роки тому

      @@BigBoyzToyz1974 72 only back?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому +1

      Sorry bud I read it wrong I thought you said Sockets 😂😂 I have Afam sprockets 60 rear 13 front I went 14 front but I’m too heavy for it to pull in top gear I recommend 13/58 if you can find a 58 rear it should give you about 80mph but still acceleration will be ok 👍

  • @fijiarc2090
    @fijiarc2090 4 роки тому +1

    Hi mate dont suppose this is for sale....?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому

      Not at the moment but I’m thinking about it you interested?

    • @fijiarc2090
      @fijiarc2090 4 роки тому

      @@BigBoyzToyz1974 I am indeed, how much would you be after do you reckon?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому

      £2000 has 3000 miles

    • @fijiarc2090
      @fijiarc2090 4 роки тому

      @@BigBoyzToyz1974 that's a deal mate, where do you live?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому

      Sh00k up Ricola Wolverhampton

  • @themancamgaming
    @themancamgaming 4 роки тому +1

    What tools do you use

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому

      For which part mate as I’m sure I explained in the video

  • @chocklatshupto8369
    @chocklatshupto8369 3 роки тому

    bike don.t know oli not akcelator

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      ??? Not 100% what your asking but I will try to assist if you can be a little clearer 👍

  • @robmasters2628
    @robmasters2628 3 роки тому +3

    Hi mate please can you do a video for the valve clearance. I have a rx 125 which is the same engine and I am clueless 😅. Also do you know how to adjust the cam chain tensioners? If thats the right thing . My engine has a chainy rattle at certain revs and was told that's what it could be. Sorry for the essay 😆

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      Can chain has an auto adjust mechanism it is spring loaded tensioner..valves are a little tricky as they have shims not adjusters as such so you have to take out the old ones see what size they are and buy the ones to make up the difference

  • @fijiarc2090
    @fijiarc2090 8 місяців тому +2

    Can I use 10w40 if I live in UK?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  8 місяців тому +1

      10w40 isn't preferred as it's thicker at temperature but it can be used if you really need to will reduce mpg slightly and make sure engine fully warmed up before thrashing as oil will take longer to circulate

  • @kingmaho58
    @kingmaho58 3 роки тому +3

    you safed my money and my life thanks for this video !!!

  • @foxyfensome1630
    @foxyfensome1630 3 роки тому +2

    Great video.... Do you have a video on removing the fuel Injector? I have a feeling mines blocked and what to check before I send it off to the garage

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому +1

      No sorry but it’s an easy procedure just take the bolt/screw out the top and it just pulls out 👍

    • @foxyfensome1630
      @foxyfensome1630 3 роки тому +1

      @@BigBoyzToyz1974 yeah. I figured it out, and blasted thru with some carb cleaner and now she runs. 😁

  • @tobydowding3487
    @tobydowding3487 3 роки тому +1

    Hi mate super helpful video! Got any tips or videos for changing the rear brakes pads? I can't seem to find anything for the rs4 125

  • @Alessandro-102
    @Alessandro-102 4 роки тому +2

    Great video boss! I bought a used RS4 a week ago, and I’m pretty sure I have to do all the maintenance. Where can I buy all the exact parts within the video? Is there a way you can send me some links, if possible? Cheers 🔥

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому

      www.ebay.co.uk/itm/283340154732

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому

      Castrol Power 1 Racing Engine Oil... www.amazon.co.uk/dp/B004KS559E?ref=ppx_pop_mob_ap_share buy 2 of these 👍

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому

      www.ebay.co.uk/itm/352459149251

  • @fl0w153
    @fl0w153 Рік тому +1

    Yeah, this is great when u have Derbi GPR 125 4T and there is no info about it. Mean while RS4 is the same engine (unter part)

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  Рік тому

      Some parts are slightly different the clutch basket and internal gears are I tried to fit a derbi clutch basket the rear sprocket was bigger but basically the same 👍

  • @seangraham7162
    @seangraham7162 3 роки тому +1

    Great video ! I just bought this bike can you tell me what the 3 rubbber tubes are that run down the left side ? They don’t connect to anything ? Cheers

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      Congratulations on your new bike good choice. Those rubber tubes are the breather and overflow pipes from your petrol tank mate. There is a small slot in the fairing at the bottom put them in that hole if not already keeps them neatly together 👍

  • @harithjumadi4301
    @harithjumadi4301 4 роки тому +1

    Where do you get them aftermarket brake & clutch levers? I got a set from Aliexpress awhile back, while the clutch one does fit (not snug tbh), the brake one does not (Hole too small and the arm pushing the piston misfires). Most likely they sent me a wrong set for a different bike... hate it when that happens. Which is why being a cheapo for levers most of the time is not worth it. Happened to my Duke 390 2017 last year. Ended up I just got me self a well known aftermarket one, albeit pricey, it fits perfect. Especially for the safety clutch switch thingy.
    Do let me know where i can get yours. They are adjustable, just what i wanted.

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому

      Got them off eBay not 100% of exact supplier but loads on there..

    • @harithjumadi4301
      @harithjumadi4301 4 роки тому

      @@BigBoyzToyz1974 Roger. I guess Ebay & Amazon still has its buyers protection if they send you a wrong set. Not sure about Aliexpress, im trying to get a refund 🤞

  • @ghostofvatican4955
    @ghostofvatican4955 2 роки тому +1

    Hi bro did you no where fuel filter is located? I must hange it

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  2 роки тому

      Fuel filter is inside the tank under the fuel filler cap attached to the fuel pump you can clean it if careful it’s a teabag style filter 👍

  • @Björnúlfgöðr
    @Björnúlfgöðr 3 роки тому +1

    Alright mate just got a 2013 rs4, it’s my first bike and seems to look like it needs a bit of work, what torque set you recommend getting? And how do you know what Newton metre force you’re tightening each bolt to? Ta

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому +1

      Hello bud welcome to the channel. I’m not sure what you mean by saying torque crankset but with regard to tightening each bolt get a manual (follow my link) and a 3/8 torque wrench with a range of sockets from 8mm to at least 24mm (32mm if you can) any further information don’t hesitate to ask I will help anyway I can. www.carlsalter.com/mcpdf/Aprilia_RS4_125.pdf

    • @Björnúlfgöðr
      @Björnúlfgöðr 3 роки тому +1

      Got the name wrong 😂 appreciate the help

  • @dre3ame3r23
    @dre3ame3r23 Рік тому +1

    Would these tips apply for a Tuono 125 ? I’ve got a 2018 one and they look really similar

  • @fla8ke175
    @fla8ke175 3 роки тому +1

    I bought a used rs4 but with no battery do you know where you put it in I'm still a beginner with bikes soo help will be much appreciated

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому +1

      Yes buddy it’s under the tank follow my video on how to change the spark plug you will see it there 👍

    • @fla8ke175
      @fla8ke175 3 роки тому +1

      Thanks you much appreciated and love your vids

  • @robmasters2628
    @robmasters2628 3 роки тому +1

    Hi mate great video very helpful . Where did you get the service parts from ? Also have you done valve clearances on these, I hope you have as I need mine servicing and have no idea what to do 😆

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому +1

      Ok mate there is a link in the description to Amazon products in the video also I have done the valve clearance I will be doing mine again shortly so I will upload a video when I get round to it 👍

    • @robmasters2628
      @robmasters2628 3 роки тому +1

      Great cheers 🍻 mate

  • @b_hwhho9909
    @b_hwhho9909 3 роки тому +1

    This video is useful, thx dude

  • @unearthlynarratives_
    @unearthlynarratives_ 3 роки тому +1

    Great video man. I need to recharge my battery, do you know where the batter is located? Kind regards

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      Yes under the tank at the front held in by a rubber bracket 👍

    • @unearthlynarratives_
      @unearthlynarratives_ 3 роки тому

      @@BigBoyzToyz1974 Thanks, i managed to find it today and recharged the battery now. Hopefully it isn't too bad and holds the charge.

  • @veksuSHORTS
    @veksuSHORTS Рік тому +1

    is it 4t? The same engine is in derbi gpr 125?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  Рік тому

      Kinda it's based on the derbi 125 4t engine..slightly different.

  • @jhz1050
    @jhz1050 2 роки тому +1

    Hi mate do you know what the spark plug gap is on the iridium ngk cr9eix plug?

  • @budgetroadkillers
    @budgetroadkillers 3 роки тому +1

    Any mods for the air box? Have you ran a pod filter?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому +1

      I’ve drilled the Airbox I used a. Bmc air filter and I put it back to stock as none made it quicker just louder. Honestly mate I’ve tried everything and just keep it stock it runs better like that only thing to mess with is sprockets but even that is tiny improvements

  • @caijames3853
    @caijames3853 3 роки тому +1

    What’s the difference between 5W40 and 10W40 because I’ve just bought some petronas 10W40 and wondering if I need to spend more money??

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому +1

      No you will be fine 5w is how thin the oil is at 5c and 10w is thicker at 5c but both are 40 at operating temp so use 5w40 in the winter but 10w40 is fine as long as temperature is above freezing 👍👍

    • @caijames3853
      @caijames3853 3 роки тому +1

      @@BigBoyzToyz1974 thank you, do you also know where to get a new radiator from because I’ve looked everywhere mostly coming from China and I don’t trust the metal it’s made out of

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      I don’t unfortunately I would just look out for an original you might be lucky and get a clean low mileage one.

    • @caijames3853
      @caijames3853 3 роки тому +1

      @@BigBoyzToyz1974 thank you again

  • @starvinmarvin3596
    @starvinmarvin3596 3 роки тому +1

    Could you provide a link for the new clutch cable? looking for it :)

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому +1

      www.fowlersparts.co.uk/parts/5693344/rs-125-4t-rs-125-4t-rs4-125-chassis-number-prefix-zd4tw000-2014-2016-rs4-125-chassis-number-prefix-zd4tw000-all/clutch-control Item 5 on the list 👍

    • @starvinmarvin3596
      @starvinmarvin3596 3 роки тому +1

      @@BigBoyzToyz1974 Thank you, much appreciated!

  • @nogetter8843
    @nogetter8843 3 роки тому +1

    Hi mate, just wondering if you could help. I have a 2018 Aprilla Rs4 and I'm struggling to find gears three, two and one when I downshift. I have a quick shifter on also. Thanks alot.

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      Sounds like your selector fork could be slightly out of position. Try moving your connector that goes from quick shifter to the engine so it’s down but about 15 degrees towards the front. Try that 👍👍

    • @nogetter8843
      @nogetter8843 3 роки тому

      @@BigBoyzToyz1974 Appreciate the reply. With limited knowledge, I tried what you suggested and now it will only find 2nd gear. Probably didn't do it right. A few think it's my gear selctor and are saying I might as well buy a new engine.

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      No bud the gear selector is a simple procedure to replace but it can go slightly out of position which would cost nothing to repair my first engine had this issue was stuck in second gear. It’s a star looking cog on the end of the selector rod that is tightened on at other end with an Allen bolt need to take the clutch side engine case off and it’s located at the left bottom corner 👍

    • @nogetter8843
      @nogetter8843 3 роки тому +1

      @@BigBoyzToyz1974 Hi mate. Just thought I'd mention it turned out to be the gear shaft spring, thankfully and nothing more. But if it wasn't for you though I wouldn't of questioned it, so a big thanks. Keep uploading. 👍

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      @@nogetter8843 thanks bud and glad you got it sorted 👍👍

  • @Rs4ZH
    @Rs4ZH 5 місяців тому

    How many Litres oil come in the Engine ??

  • @jhz1050
    @jhz1050 2 роки тому +1

    Hi mate any advice? My rs4 is struggling to select gears going up and down i was stuck in 3rd for a while and it wouldnt go up from 3rd and just in general hard to shift. I thought it was my clutch cable cus my old one was frayed but its not. Cheers

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  2 роки тому +1

      That will 100% be the ear select spring it’s notorious for snapping on the rs4 straight forward to swap but you have to buy the whole shaft usually that isn’t cheap.

    • @jhz1050
      @jhz1050 2 роки тому +1

      @@BigBoyzToyz1974 ah ok mate thanks alot for the advice ill have a look 👍

    • @jhz1050
      @jhz1050 2 роки тому +1

      @@BigBoyzToyz1974 by gear select spring do you mean the shifter return spring? im not sure if they are two different things lol

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  2 роки тому

      Yes mate that is it www.ebay.co.uk/itm/334498670568?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=wqifggi-thq&sssrc=2349624&ssuid=xcedtcktrsk&var=&widget_ver=artemis&media=COPY

    • @jhz1050
      @jhz1050 2 роки тому +1

      @@BigBoyzToyz1974 im gonna need a new gear selecter shaft had a look today and the spring is broke and a little bit of metal has been broke off the shaft

  • @МартинМаринов-г4з
    @МартинМаринов-г4з 8 місяців тому

    What’s the name of the air filter

  • @milanpetkovic4339
    @milanpetkovic4339 3 роки тому +1

    Oil and air filter model?

  • @karoollos
    @karoollos 5 місяців тому

    What the socket size for changing oil filter and for oil drainer

  • @nogetter8843
    @nogetter8843 3 роки тому +1

    Big help this video, nice one.

  • @jakeself2883
    @jakeself2883 3 роки тому +1

    Hello I was wondering if anyone could help me I need to find my indicator relay and was wondering if anyone could tell me where it was?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому +1

      It’s behind the battery under the tank bud 👍

    • @jakeself2883
      @jakeself2883 3 роки тому

      @@BigBoyzToyz1974 thanks man, I'll go buy the stuff to take it apart, what do I need if you don't mind me asking, thanks for the help

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      @@jakeself2883 relay and Allen keys that’s all for changing that. 4mm and 6mm I think not 100%

    • @jakeself2883
      @jakeself2883 3 роки тому

      @@BigBoyzToyz1974 sorry to bother you again but I'm struggling to find it I can see all the fuses behind the battery do I have to take the battery out to get to it thanks

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      @@jakeself2883 it’s on the back of the fuses I’m sure let me investigate

  • @fabianlee4694
    @fabianlee4694 3 роки тому +1

    hey, have you tried using an aftermarket air filter like from k&n or BMC?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      Yes used a bmc. Waste of money makes no difference at all if anything it made it run worse. Run it for about 6 months before removing it.

    • @fabianlee4694
      @fabianlee4694 3 роки тому

      @@BigBoyzToyz1974 oh shit i'm just about to go get it installed in my 2018 rx125.. did you feel a loss of power or something?

    • @malcolmbates4563
      @malcolmbates4563 Рік тому

      Doing stuff like that only works if you can flash the ecu to male it run properly. Not even worth it ona 125

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  Рік тому

      Also I would like to see you get an Aprilia rs4 ecu flashed as its impossible it uses an Axone reader which are notorious for being hard to crack...if you look at my other videos I have had race bikes the 125 was a cheap work/town winter tool..👍

  • @PUUDI
    @PUUDI Рік тому

    Pls help gdzie jest filtr paliwa/where is fuel filter?

  • @vickywaqas333
    @vickywaqas333 2 роки тому

    Make more videos regarding rs4 125 how to improve it's starting pick I mean acceleration? It's take too much time to achieve 60mph .... Even my motorbike only 3000 mph driven . I adjusted it's drive chain ⛓️ & proper lubricant .
    Regards

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  2 роки тому +1

      My rs4 125 days are gone now I don’t even own one but I will tell you now nothing you do to that bike will make it faster they are just slow. Don’t waste money on upgrading anything just ride it for what it is and upgrade to a bigger bike…👍👍

  • @jhz1050
    @jhz1050 2 роки тому +1

    Hi mate whats the torque settings for the head?

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  2 роки тому

      Head mate what’s that the spark plug ( if so 20Nm )

    • @jhz1050
      @jhz1050 2 роки тому +1

      @@BigBoyzToyz1974 iridium ngk plug 👍

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  2 роки тому

      Yes mate 20Nm 👍

    • @jhz1050
      @jhz1050 2 роки тому

      @@BigBoyzToyz1974 thats for the head bolts then?

  • @caille08
    @caille08 4 місяці тому

    Excellent video! Thanks for sharing how to service the Aprillia!🙂👍🏍️ more power and God bless you sir🙏❤️

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 місяці тому

      Thank you for your feedback really appreciated...😍

  • @ashleycooksey7760
    @ashleycooksey7760 3 роки тому

    Alright mate Iv just brought a Rs4 125 and it starts an runs but keeps stalling anychance you know what that will be Iv been told it could be ecu but Iv not got a clue about bikes

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому +1

      Ok first thing I would check would be spark plug fouling then clean injector (screw in the top then pulls out) I very doubt it’s the ecu if ecu failed it wouldn’t run at all. Check rubber boot that injector bolts to cylinder is tight and not split either will give you a lean condition that will make the idle hang and cut out. Hope this helps and hopefully it’s just an old spark plug (make sure gap on plug is 0.7mm) 👍

  • @blackninjafamily
    @blackninjafamily 4 роки тому +1

    Engine oil 1.2 liter or 1 liter??

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому +1

      The engine does require 1.2ltr but unless you split the engine and get every last drop out it will always have oil remaining in there..So if doing an oil change just put 1ltr in first to see where your at..If you put 1.2ltr there will definitely be too much 👍

    • @Pawel-o1p
      @Pawel-o1p 25 днів тому +1

      So u recomended 1 liter corect??

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  25 днів тому

      Put 1 ltr then check dip stick

  • @Subliminal3117
    @Subliminal3117 3 роки тому

    Are your brake and clutch lever loose?

  • @N1ko0L
    @N1ko0L Рік тому

    For anyone wondering it's the exact same placement on The rs 125 2017-2021 and Tuono 125 2017-2021, can't say about the newest since i don't own one but probably The same
    Btw thanks a lot for the video i now feel really confident about doing It do mine :)

    • @N1ko0L
      @N1ko0L Рік тому

      Also, if anyone has The same problem as me, when you flip the reservoir, the fuel pump may empty itself so When you do it this just keep cranking untill it pop alive ( i recommend a good ride so the battery is full before attempting any of this

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  Рік тому

      Flip the reservoir. What is this I'm confused 🤔

    • @N1ko0L
      @N1ko0L Рік тому

      @@BigBoyzToyz1974 i mean When you go to check the sparkplug you have to flip the reservoir? I'm not sure how to say it, English isn't my first language 😅

  • @GratisMagnaHydraAntithius
    @GratisMagnaHydraAntithius 4 роки тому

    There are two holes for the screwdriver to take the two screws out of the filter housing.

  • @C-EWoodWorkLTD
    @C-EWoodWorkLTD 4 роки тому +1

    Cheers Matey👍

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому

      Anytime mate you got any questions related to motorcycle maintenance just drop me a message I do my best to help.👍

    • @C-EWoodWorkLTD
      @C-EWoodWorkLTD 4 роки тому

      @@BigBoyzToyz1974 quality stuff mate, only question I would have atm is when I'm slowing down theres a whining noise? Any ideas bud

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому

      callum j check your chain isn’t too tight I had this a few weeks back I didn’t have enough slack/free play in my chain was causing gearbox to whine on de acceleration 👍

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  4 роки тому

      callum j another tip when adjusting chain have 25-30mm free play but not pushing hard if chain lifts off top chain guide your pushing chain too hard measure from the bottom until you push up and the top chain doesn’t lift, if that makes sense

  • @auenzucht2257
    @auenzucht2257 4 роки тому

    Can some1 tell me how to turn the service wrench icon off for aprilia sx 125 2019 engine looks similar there are codes possible from 000 to 999

    • @j.k6943
      @j.k6943 4 роки тому

      Ask your Dealer

    • @marvin5307
      @marvin5307 3 роки тому +1

      It's code 2-1-1. 1) Turn ignition off 2) hold the button 3) Turn ignition on 4) wait a few secs 5) release button 6) enter the code
      (sorry, my english isn't that good)

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому +1

      Press which button ?

    • @auenzucht2257
      @auenzucht2257 3 роки тому +1

      @@BigBoyzToyz1974 next to screen u have to press it short to write code and after 3rd number press short aigan

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому +1

      Ok this just for sx as rs has no button next to the screen 👍

  • @Rumbleboxing03
    @Rumbleboxing03 2 роки тому +1

    What tool is it called you used for the spark plug. Super helpful video 👍🏽👍🏽

  • @malcolmphillips1265
    @malcolmphillips1265 3 роки тому +2

    Great vids do you have a video about changing the gearbox/clutch oil I have a 2012 RS4 125 but the manuals are not very clear thankmin advance 😀

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  3 роки тому

      This video changes the clutch gearbox oil 👍

    • @austroblast
      @austroblast 2 роки тому +2

      @@BigBoyzToyz1974 thank you - so the "engine oil" is also for the gearbox?
      On mine it's very noisy to switch gears...

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  2 роки тому +1

      @@austroblast yes mate just one oil 10w40 or 5w40 don’t put transmission oil in it will destroy your valves..

    • @austroblast
      @austroblast 2 роки тому

      @@BigBoyzToyz1974 ok thank you Do you have any advice regarding the loud cracking sound when shifting gears? Or is it normal? The bike now has 800km up.

    • @BigBoyzToyz1974
      @BigBoyzToyz1974  2 роки тому

      No sorry loud cracking sound when changing gears doesn’t sound good but these do have a weak spring on the selector fork have known to fail

  • @hey_im_a_sheep2429
    @hey_im_a_sheep2429 3 роки тому +1

    Can anyone say me how to refuel motoroil in this bike? I have that bike new and i dont know how i can put new motoroil in it