Epson WF-7820 Sublimation Printing

Поділитися
Вставка
  • Опубліковано 13 гру 2024

КОМЕНТАРІ • 184

  • @aliloniajones2878
    @aliloniajones2878 4 роки тому +5

    Wow! Everyone has been saying it will be months before a solution is found! You Genius!

    • @jorgegonzalez6319
      @jorgegonzalez6319 4 роки тому

      After the printer reads empty, you would have to refill it and then buy a new pack of 812xl ink to take the chips out and do it again.

    • @darryldawson6909
      @darryldawson6909 3 роки тому

      How do you remove the chips

  • @krdesigncoteesandmore7766
    @krdesigncoteesandmore7766 2 роки тому +6

    Can you share how you changed the chips over to the sub cartridges?

  • @jorgetobaru353
    @jorgetobaru353 4 роки тому +18

    Great video! Question. So what do i do if i ran out of ink? do we keep refilling the cartridge without reseting the chip? thank you!

    • @Yologolo64
      @Yologolo64 3 роки тому +3

      I hope he see this comment and answer the question eventually

    • @ohheycarissaj5661
      @ohheycarissaj5661 3 роки тому +2

      From what I have learned is that you have to buy new epson ink everytime you have to refill and get new chips each time. Sounds pricey.

    • @Yologolo64
      @Yologolo64 3 роки тому

      @@ohheycarissaj5661 I ended up getting the epson et 2720. It is smaller but I love it and have had no problems. The only thing I had to do it buy the sublimation ink and paper. I was gonna use the actual epson ink eventually for normal printing though.

    • @ZymixProductions
      @ZymixProductions 3 роки тому +4

      I am not an expert and I am just starting in this printing venture. I don't think you have to reset the chip if the cartridges are refillable, just refill them and you are ready to go. Although he is using Gorilla ink and not Epson. If they sell Epson ink for refills, then just do the same process he did with his Gorilla ink, but using Epson.

    • @whatsuppp2098
      @whatsuppp2098 2 роки тому +1

      @@ZymixProductions facts!

  • @two2tango222
    @two2tango222 4 роки тому +3

    Omg omg wow I just bought one 2 wks ago were thinking it’ll be a while yet before someone comes up with a chip and cartridge to do this. This is exciting news thanks for the video!

    • @McZell
      @McZell  4 роки тому +1

      It will still be a while before a better solution will be available. But this method would work if you are in a jam and need to print wide format from an off the shelf, available now, printer.

    • @jazmincovarrubias7229
      @jazmincovarrubias7229 3 роки тому

      @@McZell is it worth keeping the printer for when this is available? If I don't have another wide format option?

  • @jrl9319
    @jrl9319 2 роки тому

    I have one I can buy but its been used by reg ink already ... anyway to clean and still convert it?

  • @crcdesign9886
    @crcdesign9886 2 роки тому +1

    I wonder how many prints like that you would get out of a set of cartridges? I'm just trying to figure out my cost per unit since we gotta buy new chips every refill.

  • @JORGINHODONASCIMENTO
    @JORGINHODONASCIMENTO 3 роки тому +2

    I truly liked how you went right to the point. I would like to sak you, about 8 months have passed since this video. How's the printer doing? Do you have a tip on sublimation on cotton or blends?
    Thanks in advance

  • @RG-27
    @RG-27 3 роки тому

    I have a epson workforce 7840 and everytime I print something out it keeps leaving thick black lines on both sides. Do you know how I can get a clean print?

  • @laurakerby8156
    @laurakerby8156 Місяць тому

    I did these settings and my pink comes out with a red tint. What am I doing wrong? Its a brand new EPSON 7820

  • @judyselene148
    @judyselene148 3 роки тому

    I just purchased the same one but my black ink won’t work what could I do ???????

  • @4THALASSA1
    @4THALASSA1 2 роки тому

    What type of paper. I have a problem with my tray coming out

  • @diannehilson6381
    @diannehilson6381 3 роки тому

    Can you help me? I did everything you did but my colors are off.

  • @Scrap3001
    @Scrap3001 Рік тому

    How long did the ink last before it was time for new chips?

  • @jimfray3742
    @jimfray3742 3 роки тому

    That looks good, Ok so what am I doing wrong because mine always transfer while looking a bit faded with the colors not so vibrant

  • @marciacorreia4230
    @marciacorreia4230 3 роки тому

    My yellow keeps saying the cartridge is unrecognizable. What do I do?

  • @dgoddard
    @dgoddard 3 роки тому +2

    I used your 7820 set up video and everything went perfectly! Love your vids.

    • @ZymixProductions
      @ZymixProductions 3 роки тому

      Hello Sir, I just bought the 7820. I plan to use regular ink and heat transfer for shirt. Will I be able to switch to sublimation down the road if I wanted?

    • @dgoddard
      @dgoddard 3 роки тому +1

      @@ZymixProductions you won't be able to use regular ink for sublimation. But you can switch it later, if you choose, but I wouldn't recommend it. It's much better to start with a new, clean printer.

    • @ZymixProductions
      @ZymixProductions 3 роки тому +1

      @@dgoddard Thank you Sir. Great advice.
      Thank you for your time.

    • @itsmemars9493
      @itsmemars9493 3 роки тому

      Hi there, I did the full set up for the 7820 too but the paper is blank after printing I am hoping it’s something as simple as a setting. Did you experience this? Please help!

  • @kenalovesglam2493
    @kenalovesglam2493 4 роки тому +1

    Hello could someone help I have the same printer and did the same setup. My printer will not read my black ink. It keeps saying my black is low and it not. Also when I print my settings are horrible. Lastly I just want to throw the whole printer out the window lol. Now when I try to print it comes out blank 😔

  • @dadscandoittv
    @dadscandoittv 2 роки тому

    Hi. Once the cartridges are switched. Can you put the original cartridges in the printer to print regular prints too. Or is there no Going back?

  • @OscarAndres_214
    @OscarAndres_214 3 роки тому

    Straight to the point! I think I'll buy one of these soon! Thanks!

  • @Vbattle2822
    @Vbattle2822 4 роки тому +10

    I just bought this printer Tuesday after finding out refillable cartridges would be available for it soon

    • @jorgetobaru353
      @jorgetobaru353 4 роки тому

      i just bought one too. but now i dont know how to get this cartridges! real dilema!

    • @Vbattle2822
      @Vbattle2822 4 роки тому +2

      @@jorgetobaru353 I took mine back and got the Ecotank 2720 for $199 that should be delivered today. Costco has the Ecotank 3760 in store now on-sale for $279

    • @MYMAKEUPROOMDIVA
      @MYMAKEUPROOMDIVA 4 роки тому

      Where do you see that because when I go online they don't even sell that brand only the ink but not the printer especially that model at Costco i see a et-2760 at Sam's for $249 but out of stock

    • @Vbattle2822
      @Vbattle2822 4 роки тому

      @@MYMAKEUPROOMDIVA the ecotank 3760 is currently $349 on Costco website. The sale is over. It comes with 2 extra bottles of black ink. They cake it the Epson ET-3760 Special Edition. I'm assuming because they're including 2 extra bottles of ink.

    • @Vbattle2822
      @Vbattle2822 4 роки тому +4

      @@jorgetobaru353 Cosmos ink will be selling the refillable cartridges along with the sublimation ink soon

  • @maritzaramos5037
    @maritzaramos5037 3 роки тому

    Hi, I am trying to covert my Eason 7720 printer in to sublimation. So far I was able to get the other colors to work but unfortunately the black is not working. Perhaps you know why and you can help me. I have done everything you have recommended which help with the other colors but the black does not print even when printing a nozzle check. Thank you.

  • @santanawhite776
    @santanawhite776 3 роки тому +1

    Great Video, Didn't know you could license plates niceeee. Thanks for the video

  • @stacydodge9243
    @stacydodge9243 4 роки тому

    Can this printer be used for heat transfer sublimation mugs? I purchased a WF-7720 but haven't even been able to get past the setup screen, not even to the insertion of the ink cartridges. Contacted Epson through email and they're wanting me to call them tomorrow. If I have to return the 7720, I would like to purchase the 7840, but it says that it's "heat-free" and I've always heard the printer heat is what is needed for heat transfer sublimation.

  • @cynthiahumphrey8491
    @cynthiahumphrey8491 3 роки тому

    I finally got the printer to recognize the cartridge. I tried to print but the black isn't printing. Not sure what to do from here. It's printing out like a negative picture.

  • @asmarjohnson9630
    @asmarjohnson9630 4 роки тому +1

    I have a wf7840 and I’m having a hard time printing my sublimation paper. When I print it just comes out blank can you give some advise on to what I’m doing wrong?

  • @CustomizeYoLife
    @CustomizeYoLife 4 роки тому +8

    Hi can you do a video on how you removed the chips in place them on the other ink Cartridges? Please Sorry I'm super new to the world of sublimation 🙂

    • @damonmczell9013
      @damonmczell9013 4 роки тому +9

      Yes im working on a video now.

    • @leochou9519
      @leochou9519 4 роки тому

      Yes I too would like to know!

    • @McZell
      @McZell  4 роки тому +3

      Im uploading new video now.

    • @two2tango222
      @two2tango222 4 роки тому +1

      @@McZell wow! Thanks!

    • @marymedellin6751
      @marymedellin6751 4 роки тому

      @@damonmczell9013 is this vid available now?

  • @phunhonla2484
    @phunhonla2484 3 роки тому

    this way will work for one time run. Can can not refill without replace the chips, the chips have limited pages. Even your guys refill, it still say out of ink when cooldown for ink times ended.

    • @McZell
      @McZell  3 роки тому

      Yes. This is explained in the other videos on this model. See the updated video in the description. 👍🏿

  • @voniluv1965
    @voniluv1965 4 роки тому +1

    Hi there! I watched your video, I got the cartridges on the link you included as well can't wait for them to get here. Any suggestion where to buy the chips yet? I will be using the ones it came with first.
    Thank you!

  • @sonyajulien6843
    @sonyajulien6843 4 роки тому

    Beautiful you don’t mess around

  • @TNGNMO_Airsoft
    @TNGNMO_Airsoft 4 роки тому

    hello! just bought epson wf-7840 where can i buy refillable cartridge? tried the one on the link but doesn’t ship to Canada

  • @shoshannaladay4242
    @shoshannaladay4242 2 роки тому

    Hello! how did you replace the chips?

  • @judydale6352
    @judydale6352 3 роки тому +1

    How long did your initialization chips last? I posted on your 5 minute video and I have gone through the chips on the initialization cartridges and a new set of espson cartridges. this is getting expensive and now my printer won't ready the black ink. I have only printed like 15 pages so far. any advice would help..thanks

    • @McZell
      @McZell  3 роки тому +2

      The counter on the printer was at 40 when oi replaced init cartridges.

    • @judydale6352
      @judydale6352 3 роки тому

      @@McZell I figured this out and appreciate it

    • @crcdesign9886
      @crcdesign9886 2 роки тому

      @@McZell 40 prints??? and you had to buy new chips? OMG!

  • @josemeza7721
    @josemeza7721 3 роки тому

    When will the ink and cartridges be available for the bundle?

  • @hotwheelsreviews9582
    @hotwheelsreviews9582 4 роки тому

    What's the difference between this one and the 7710

  • @candacedahlgren3135
    @candacedahlgren3135 4 роки тому

    Hi. I’ve converted mine and the colors print ok on the sublimation paper but when I heat press the images, some colors are not showing or printing a different color than what is on the paper. Can anyone help ?

  • @moisesrodriguez3129
    @moisesrodriguez3129 3 роки тому

    Can it print T Shirts ?

  • @cheryllongwith6149
    @cheryllongwith6149 Рік тому

    I did this and it worked for a while and now it won’t recognize the cartridges. Any suggestions?

    • @McZell
      @McZell  Рік тому +1

      It could be a broken pin if it's just one cartridge that's not being detected. But if you updated the firmware, it will only recognize official Epson chips. You won't be able to use the 3rd party chips anymore.

  • @zoomiethegoober
    @zoomiethegoober 4 роки тому

    Can I do sublimation with a wf3820?

  • @six-figures7080
    @six-figures7080 3 роки тому

    Awsome job, looks great 👍👍👍

  • @kamplans9933
    @kamplans9933 3 роки тому

    So did you purchase ink for 7820/40 still or another ink number type?

  • @mialopez6474
    @mialopez6474 3 роки тому

    Where can I purchase the 802xl I don’t find it no where

    • @McZell
      @McZell  3 роки тому

      The link is in the description.

  • @stacyannedeangelo6402
    @stacyannedeangelo6402 4 роки тому

    How can I get the 802 cartridges???

  • @kingpenny2
    @kingpenny2 3 роки тому

    ok i did complete set and coversion but my setting do not have the same options. there is no option for a sub or vivid what did i do wrong?

    • @McZell
      @McZell  3 роки тому +1

      Those are settings that I added. Check my other video for instructions on setting up printing presets.

  • @jasongipson5519
    @jasongipson5519 4 роки тому +1

    Do you have to swap the chips every time your ink runs out or will the chips still work on refills?

    • @jasongipson5519
      @jasongipson5519 4 роки тому

      nevermind I just answered my own question.

    • @jessflo1610
      @jessflo1610 3 роки тому

      Were you able to reuse the chips to refill again or..

  • @chuckfromphilly
    @chuckfromphilly 4 роки тому

    How is it for sublimation printing and how is the printer?

  • @MrsBratton26
    @MrsBratton26 2 роки тому

    Does anyone know how to switch the speed to high speed setting on this printer

  • @tamaradrake2763
    @tamaradrake2763 4 роки тому

    Where did you find the 802XL empty cartridges

  • @julieparks-lehr2744
    @julieparks-lehr2744 4 роки тому

    I have one of these printers and want to be able to sublimate. I would like to buy these Cartridges and ink. I tried using link. Is there another place to order or a waiting list? Thanks 😊

  • @elmz123
    @elmz123 4 роки тому

    Hellow I have a WF7210 also planning to use Sublinova Ink Smart, do you use ICC profile on your print??? I wanted to convert my printer from pigment into sublimation, I heard many people complain about 7710/7720 printers with dull and inaccurate colors... Do you think sublinova ink will make the WF 7710 print with punchy colors??? hope you can reply

    • @McZell
      @McZell  4 роки тому

      I use the same color settings for all the ink use no matter the brand.

  • @savyadmin2290
    @savyadmin2290 3 роки тому

    Is the paper heat transfer paper? or is it special paper for sublimation? Thanks

  • @daphneibarra4934
    @daphneibarra4934 4 роки тому +1

    Maybe be a oblivious thing but do you need sublimation paper ?

  • @robertovega1184
    @robertovega1184 2 роки тому

    Thank you for the knowledge!!
    Just a quick question, what program are you using to print?

  • @valenevaluables4022
    @valenevaluables4022 4 роки тому

    Hi!! I have been trying to order the 802xl refillable cartridges from dynamite gorilla and they are sold out. Do you know any other place I may can order from? Oh yeah great video

  • @angelynnmarie6718
    @angelynnmarie6718 3 роки тому

    Has anyone used this printer for waterslides? How did it do?

  • @myvisionitm78
    @myvisionitm78 3 роки тому

    Hi what software are you using on your tablet

    • @McZell
      @McZell  3 роки тому

      I'm am using windows 7 and Photoshop cs5

  • @ernestoo8309
    @ernestoo8309 3 роки тому

    Will these chips have to be replaced every so often?... Thanks

  • @bossladyphipps321
    @bossladyphipps321 2 роки тому

    How did you connect your apple tablet

    • @McZell
      @McZell  2 роки тому

      That is a windows tablet

    • @bossladyphipps321
      @bossladyphipps321 2 роки тому

      @@McZell oh ok thank you, I’ll need to go and invest in a windows tablet.
      Enjoy your night

  • @LYNNETTEVMACK-ic4kh
    @LYNNETTEVMACK-ic4kh 4 роки тому

    What ink are you using for sublimation

  • @mirandaandkenneth
    @mirandaandkenneth 3 роки тому

    Totally new to this but was wondering couldn’t you just keep the refillable cartridges full so they didn’t run out and you didn’t have to change them out and worry about new chips?

    • @McZell
      @McZell  3 роки тому

      Please see the latest blog post the dynamite gorilla website. It answers this exact question.
      Dynamitegorilla.com

  • @bqday
    @bqday 4 роки тому

    👋 McZell / Viewers ...Question: You stated the 7820 replaced the 7710. Has the 7720 been replaced? Or is it just out of stock EVERYWHERE?

    • @McZell
      @McZell  4 роки тому

      The 7840 is replacing the 7720.
      WF-7720=WF-7840
      WF-7710=WF-7820

  • @faisalfarhad6586
    @faisalfarhad6586 4 роки тому

    How much does this printer cost?

  • @summermaddox5496
    @summermaddox5496 3 роки тому

    Help! I ordered my empty cartridges from you a while back for my 7840. I let the ink run dry yesterday because I forgot to fill it up when I replaced the chip. Now it won’t print that color even though I refilled the ink & changed the chip, done head cleanings & nozzle cleanings. I’ve ordered new cartridges also. Please help!

    • @McZell
      @McZell  3 роки тому

      Im not sure. I've never run into this issue. I've not run into any issues with this printer at all as I don't use it much.
      Make sure the vent hole is unplugged so that the ink is able to flow out of the cartridges.

    • @summermaddox5496
      @summermaddox5496 3 роки тому

      Nothing is covering the vent holes. I’ve done anything. Do you think if I use new cartridges it’ll help? Do you think I’ve damaged the cartridges or the printer?

  • @poulimaiakopo6632
    @poulimaiakopo6632 4 роки тому

    What type of transfer paper do you use for this printer? Picking my printer up today. Thanks for the video.

    • @poulimaiakopo6632
      @poulimaiakopo6632 4 роки тому

      NVM I got it, buy I received my refillable cart. THANK YOU

  • @tamaradrake2763
    @tamaradrake2763 4 роки тому

    How long is the life of the original chip?

  • @yusquin8668
    @yusquin8668 4 роки тому

    Hola tengo esa impresora pero no e podido encontrar los cartuchos para sublimar o para rellenar por favor me puede ayudar donde los compro

    • @lalasluvsue4836
      @lalasluvsue4836 4 роки тому

      El enlace esta en los comentarios, Dynamite Gorilla

  • @aracelirodriguez2668
    @aracelirodriguez2668 4 роки тому

    What brand of ink did you use?

  • @amaroqz2105
    @amaroqz2105 4 роки тому

    What kind of empty cartridges did you use?

  • @cynthiahumphrey8491
    @cynthiahumphrey8491 3 роки тому

    It keep getting a warning that my blk ink is low when it's full.. what do I do??? Please help.

    • @McZell
      @McZell  3 роки тому

      Replace the chip with a new one. Printers don't read the physical amount of ink inside the printer.

  • @brendaramirez6086
    @brendaramirez6086 4 роки тому +1

    Does anybody know where I can get presets for mac?

  • @claribeltorres5477
    @claribeltorres5477 3 роки тому

    My print only print yellow color 😭

  • @edwardelric8354
    @edwardelric8354 4 роки тому

    What kind of paper bro?

  • @rknihay
    @rknihay 4 роки тому

    Thinking about buying this printer until I read that I would have to constantly replace printer cartridge chips. So would a chip resetter not work?

    • @McZell
      @McZell  4 роки тому

      They don't make a chip resetter for this model yet.

    • @rknihay
      @rknihay 4 роки тому

      @@McZell 😢 thanks

    • @sandorsebestyen8620
      @sandorsebestyen8620 4 роки тому

      @@McZell How to reset chip if not available chip resetter.

  • @mikejohnson7977
    @mikejohnson7977 4 роки тому

    Anyone know if the 7820 or 7840 have the rear feeder for special media like the 7710 and 7720 had?

    • @McZell
      @McZell  4 роки тому +1

      Yes it does see my other 7820 video.

  • @ZeeDaAmazing
    @ZeeDaAmazing 3 роки тому

    I thought you could only sublimate on polyester, how were you able to get it on metal?

    • @McZell
      @McZell  3 роки тому

      You can sublimate on metal or other materials that have been coated.

    • @ZeeDaAmazing
      @ZeeDaAmazing 3 роки тому

      @@McZell wow ok thanks I didn’t know that

  • @jaslovedujour2653
    @jaslovedujour2653 Рік тому

    So I found this printer for $300. Can I use my Amazon chip resetter on it?

    • @McZell
      @McZell  Рік тому +1

      No. This printer does not have chips that can reset. You’d have to change out cartridge chips every time they read empty.

  • @pattrout1778
    @pattrout1778 3 роки тому

    I took the chips off the original cartridge and put them on the sublimation cartridge and they did not work. I followed everything did it all as you showed me to do and it did not work. HELP!!!!!!!!!!!!!

    • @McZell
      @McZell  3 роки тому

      Did the printer not recognize the cartridge after?

  • @poesclips
    @poesclips 2 роки тому

    Does anyone know what transfer paper he’s using?

    • @McZell
      @McZell  2 роки тому

      A-SUB 120g

    • @poesclips
      @poesclips 2 роки тому

      @@McZell appreciate you🙏🏽

  • @yvonnedugbazah141
    @yvonnedugbazah141 4 роки тому

    Grear job...Very informative 👍🏽

  • @yvonnedugbazah141
    @yvonnedugbazah141 4 роки тому

    Is there a way to pre-order the refillable Cartridges?

    • @McZell
      @McZell  4 роки тому

      I will have them back in stock on Tuesday. See my other video before you order. It will explain the process better.

  • @pinkice3695
    @pinkice3695 4 роки тому

    Thanks for sharing this...It really helps me as a beginner. Liked, Subscribed and Notification on...

  • @gamergab7903
    @gamergab7903 4 роки тому

    Will you be doing one for the 7840?

    • @McZell
      @McZell  4 роки тому +5

      Probably not. It would be the same process as they use the same cartridges.
      Im uploading the newer video now.

  • @luiscarlosrincongutierrez5843
    @luiscarlosrincongutierrez5843 4 роки тому

    The chips will only work for few impressions, then how should I reset the chips

    • @McZell
      @McZell  4 роки тому +2

      You can't I explain in more detail on newest video. This will only work for the life of the original chip.

  • @yvonnedugbazah141
    @yvonnedugbazah141 4 роки тому

    Ok, thank you

  • @AtunSweat
    @AtunSweat 4 роки тому

    getting it now thanks

  • @CMHasty028
    @CMHasty028 4 роки тому

    Thanks for the video, I just bought the printer for the wife. Where can I get the empty cartridges?

    • @McZell
      @McZell  4 роки тому +1

      The link is in the description. Thanks 😊

    • @CMHasty028
      @CMHasty028 4 роки тому

      @@McZell thank you! Pretty quick shipping with them? I just ordered! 😁😁

  • @faisalfarhad6586
    @faisalfarhad6586 4 роки тому

    I am asking from Bangladesh how much this printer will cost and how much money this printer can actually cost in Bangladesh

    • @McZell
      @McZell  4 роки тому +1

      I'm not sure what they will cost in your country. They cost $249 here in the states.

    • @faisalfarhad6586
      @faisalfarhad6586 4 роки тому

      @@McZell Thanks bro

  • @ssjsaint6735
    @ssjsaint6735 4 роки тому

    Where can you get those cartridges??

    • @McZell
      @McZell  4 роки тому +1

      Link is in the description.
      They cleaned me out yesterday though. Tuesday ill be back stocked.

  • @smorris5583
    @smorris5583 4 роки тому

    My cartridge telling me I’m low do I have to buy new chips? Can someone help

    • @McZell
      @McZell  4 роки тому

      Epson chips do not reset. You will have to get new chips from new Epson 812 Cartridges every time.

    • @bobbiekoon3
      @bobbiekoon3 3 роки тому

      @@McZell so are you saying you have to buy new regular cartridges to get new chips every time the refillable runs out?

  • @TrojanStarCraft2
    @TrojanStarCraft2 3 роки тому

    Thanks for sharing, after seeing I'm going to have my Wife buy the printer and purchase the refillable and ink from you.

  • @ImGumbyDangit
    @ImGumbyDangit 4 роки тому

    I'm getting ready to get this printer can someone point me to tanks and ink in Canada.

  • @fatkorn
    @fatkorn 3 роки тому

    Really cool bruv

  • @CMHasty028
    @CMHasty028 4 роки тому

    Is there a way that you could chat with my wife? She has watch your video 10 times and her printer is only printing blue and yellow. She has step by step done everything in your longer video so many times.

    • @McZell
      @McZell  4 роки тому

      Sure. Hit up the website and contact me through the chat there

    • @CMHasty028
      @CMHasty028 4 роки тому +1

      @@McZell whats the web address? I will direct her that way this morning.

  • @meetngreetlauren
    @meetngreetlauren 4 роки тому

    Awesome

  • @MrsBratton26
    @MrsBratton26 2 роки тому

    Can someone please help me

  • @Cold_rl-5
    @Cold_rl-5 2 місяці тому

    Y can’t you install a CISS INSTEAD

  • @whitneyjohnson-floyd5923
    @whitneyjohnson-floyd5923 2 роки тому

    Sold! *proceeds to buy printer

    • @McZell
      @McZell  2 роки тому

      There still isn't any chipless support for this model. You'll have to continue to swap the chips over unfortunately.

    • @whitneyjohnson-floyd5923
      @whitneyjohnson-floyd5923 2 роки тому

      @@McZell aww ok. Thanks for the insight.

  • @kissy9551
    @kissy9551 4 роки тому

    Thank you so so much, you rock!

  • @tarahbolden9737
    @tarahbolden9737 4 роки тому +1

    Great video!!! I have a artisan that's prints beautifully..... Slow and my 7620 has a clog that can't be fixed... now you got me wanting to buy another printer... On top of the 2 white toner ones delivered last week... 😂😂😂

    • @aliloniajones2878
      @aliloniajones2878 4 роки тому

      2 White Toners? Which 2 did you get? I have the color 550.

  • @byrne1916
    @byrne1916 6 місяців тому

    You should of played with the packaging for 30 minutes first. Instead you just kept delivering gem after gem 💎