Great video! Saved me on that slide plate., While cleaning I did not line the arm and slide plate. Had a klick noise when I started it. Thought a bearing was gone. This video solved my problem, Thanks!
Fantastic instructions! .. Over the years for cleaning and repair, I've removed every part of my 10yr-old P68 EXCEPT the auger motor and shaft. You've given me the confidence to tackle that project this spring.. thxs.
Thats scary, that many repairs? Im just buying my first harmon this week. I hope it doesnt keep me that busy! My used lennox i had for 9 years i didnt do a thing to, nothing! Was i fortunate?😂
Thank you more than I can say. your videos are detailed and through, plus informative. Your videos have helped me and helped me as a home owner with this heating source here in Alaska.. THANK YOU! Darryl D
Thanks You!!!, with your help I saved some money and had no issues doing the task because of the detail you took in explaining it . 17 year old Accentra fireplace insert auger not working. Piece of the cover hold down latch fell into the hopper and had to remove auger to remove it.
I bought a P61A it's still on the pallet but going somewhere sometime. Anyway this was a very well done video I mean it's hard to see some of it up in there but you covered everything and explained it very well as to function and what to look for.
Very well done and informative video! Do you sell the cold air return kits for the Harman P43 stoves? If not do you have the info for what I need to install one?
Excellent video can you tell me the size of the Rope gasket for the front door I have a p-61. I had it since 2012 and never had a problem but I think it's time for the gasket to be replaced
Thanks for such an informative video! I have an issue where my stove stops feeding pellets so eventually the fire dies out and the stove turns off. Does anybody know if there's a sensor or something that's not signaling the stove to dump more pellets into the fire? For the record, the stove initially feeds enough pellets to get the fire started but then doesnt dump anymore so the fire dies off. Please help!
Great video!!! I just bought a Absolute 43-C and would like to know if it's the same parts as the P series? One thing I noticed on mine is the dealer I bought it from did a burnout on it to reduce the paint smell and when I checked the ash bin I found several pellets in the area. Is this normal and how often should I check to see if its getting full? Thanks again for the great video.
can't find this info anywhere-have a p61a-2 -the stove burns too hot--replaced the board and it burns hotter--the feed is 7+ seconds/min on lowest setting in room or stove temp setting--what shud the low burn feed time be--also any idea if something other than air leaks can cause this
Great video....accept for the music. Could barely hear you. Music needs to be quieter or gone. Something other than POP EDM too. Maybe some easy listening.
Great video! Saved me on that slide plate., While cleaning I did not line the arm and slide plate. Had a klick noise when I started it. Thought a bearing was gone. This video solved my problem, Thanks!
Fantastic instructions! .. Over the years for cleaning and repair, I've removed every part of my 10yr-old P68 EXCEPT the auger motor and shaft. You've given me the confidence to tackle that project this spring.. thxs.
Thats scary, that many repairs? Im just buying my first harmon this week. I hope it doesnt keep me that busy! My used lennox i had for 9 years i didnt do a thing to, nothing! Was i fortunate?😂
Excellent video,
I like how you didn't rush through and explained things.
Thankyou SO MUCH!! Thanks to this vid I was able to diagnose and repair my P43 pellet stove. Very slightly warped feed auger. She's all better now!!
Outstanding Video!! The best explanation of the parts and functions of the stove.
Thank you more than I can say.
your videos are detailed and through, plus informative. Your videos have helped me and helped me as a home owner with this heating source here in Alaska..
THANK YOU!
Darryl D
Thanks You!!!, with your help I saved some money and had no issues doing the task because of the detail you took in explaining it . 17 year old Accentra fireplace insert auger not working. Piece of the cover hold down latch fell into the hopper and had to remove auger to remove it.
Great video. Had my nonfunctioning Harman P61-A up and running in an hour!
Just what I needed! Thank you.
very well done Thanks I do a lot of repairs and this is very useful.
Thanks for the video, looking at purchasing one of these and this will be a good resource.
the best so far
I bought a P61A it's still on the pallet but going somewhere sometime. Anyway this was a very well done video I mean it's hard to see some of it up in there but you covered everything and explained it very well as to function and what to look for.
Thanks for watching!
good overview of feed system - just what I was looking for. a razor blade fell in hopper feed and I need to remove. thanks
Very well done and informative video! Do you sell the cold air return kits for the Harman P43 stoves? If not do you have the info for what I need to install one?
Great video. Very helpful. Thank you.
Excellent video can you tell me the size of the Rope gasket for the front door I have a p-61. I had it since 2012 and never had a problem but I think it's time for the gasket to be replaced
Thanks for such an informative video! I have an issue where my stove stops feeding pellets so eventually the fire dies out and the stove turns off. Does anybody know if there's a sensor or something that's not signaling the stove to dump more pellets into the fire? For the record, the stove initially feeds enough pellets to get the fire started but then doesnt dump anymore so the fire dies off. Please help!
@13:29 this becomes a porno. LOL love ya scott! - 607 pellet stoves Oneonta , NY.
Great video!!! I just bought a Absolute 43-C and would like to know if it's the same parts as the P series? One thing I noticed on mine is the dealer I bought it from did a burnout on it to reduce the paint smell and when I checked the ash bin I found several pellets in the area. Is this normal and how often should I check to see if its getting full? Thanks again for the great video.
Wish my 06 XXV chain drive was that simple.
can't find this info anywhere-have a p61a-2 -the stove burns too hot--replaced the board and it burns hotter--the feed is 7+ seconds/min on lowest setting in room or stove temp setting--what shud the low burn feed time be--also any idea if something other than air leaks can cause this
I moved an have a Harman already here but i can't get the hopper open?
Shut the music off
Great video....accept for the music. Could barely hear you. Music needs to be quieter or gone. Something other than POP EDM too. Maybe some easy listening.
Video would be easier to concentrate on if it didn't have the background music going
Thank you for the video. Just for me, the background music made it very hard to understand parts of what you said.
Great video, stop the music.
Music was annoying
Annoying 'music' prevents me from liking.
Otherwise, an excellent presentation.
Very helpful but could do without that annoying music in the background