A man, who's first language I can tell isn't English, just solved my issue that hundreds of videos from professional computer builders could not... Thank you Lee
you mean that windows booting file was downloaded from mac then the file will be used in your new pc , right? if the USB booting disk is available to boot in new pc, it could be performed to setup.
Hi Lee I tried what you recommended but when I press F8 and then select my USB to boot from the screen then just shows a flashing white line instead of "press any key to boot from USB"
i have a problem, my pc always looping to automatic repair. so I decide to reinstall windows, after tried so many ways with troubleshoot options, none of them are working. but when booting from USB, after press any keys, its always go back to automatic repair. any suggestions bro,?
There seems to be a problem not only with the software, but also with the hardware. Even after reinstalling the operating system, it continues to go into the recovery option, so you need to suspect the hardware side. First, remove all dust from the computer, wipe the copper plate of the memory with an eraser, remove the CPU fan, and then apply grease properly. Now, try booting and see if you get the same problem. Nevertheless, if the first problem is reproduced, each hardware should be replaced and tested. In other words, replacing the memory -> storage device -> motherboard in the order of finding the cause. hope everything goes well.
ok question, will i able to wipe out my old hdd with windows 7 and drivers in it and install a new windows 10 on the drive... im upgrading to ryzen and it only support windows 10
yes, sure. you can refer to below link. it can guide you how to install windows10 in your new system. no need to delete old status specially. the installation includes a format function which means removing the old data. ua-cam.com/video/vyiKQO41YjM/v-deo.html
Hey great video! You helped alot forreal. I just have 1 question what if my ssd card doesnt show up on the boot priorites? How would i add it or fix it to show up?
ok. please check that your ssd would be operated or not. which means every device should be readable on BIOS menu. The other way is that you can test the ssd to put it in another computer. if the device is bootable, you can use the computer.
why my bios, when I want to change / try to disable the secure bot, can't be changed at all? secure boot locked, is there a solution to my problem? thank you
Hey can you help me out? i got the same thing as you but i get an exf remove disks or other media reboot and select proper boot device. i have it on legacy only
What do you do if its stuck on the bios screen and doesn't respond to f8 command? I can't even boot off the USB to reformat the SSD (the source of the problem).
First, remove the dust inside the computer body using a high-pressure compressor and try again. If this doesn't work, you need to verify each part one by one. In other words, try after removing the SSD, try after removing the graphics card, etc.
Hi, what CHA FAN do you use ? 3 pin or 4 pin? In the manual it is PWM CHA FAN control, it seems you cannot switch it to DC mode like in MSI motherboards. Could you confirm please? I was refering to ASUS H410M models...
Hello, normally the pinout would be 4 pins (FAN PWM/FAN IN/FAN PWR/GND) on the mainboard. As you may know, FAN PWR & GND are +12V and common ground respectively. FAN PWM is the Pulse Width Modulation (PWM) input signal that can control the cooling rate and also saving energy if the full speed is not required. FAN IN is the outputs a signal that pulses twice for each revolution of the fan as a pulse train, with the signal frequency proportional to the fan speed. In conclusion, if you have 3pins, insert the fan header from the right end. Otherwise, connect according to the pin.
hello, can you let me know more information for the situation of your malfunction ? what do you want to do? if you want to install the windows in your computer, please check below. 1.bootable usb with windows 2.disk type-mbr or gpt 3.bios setting-usb needs to be on the top priority in boot list 4.HDD or SSD - check whether the devices can be seen in boot list hope it can be helpful
Let me ask you below. What are gonna do in this situation? 1.for Windows Installation -> please check your usb is bootable or not. -> if USB is bootable, check again that USB boot sequency would be the top priority in Boot menu. -> if USB is not bootable device, please follow this link. ua-cam.com/video/cpQINCkbRZ8/v-deo.html 2.for Windows booting -> whether the HDD or SSD is bootable or not -> if yes, try to do above #1's way. 3.although #1 & #2 were not the solution in your pc, please consult with local A/S center for your computer. Hope my explain will be helpful.
which means your computer doesn't identify the first storage for booting in bios procedure. So need to find out whether the storage is readable in the other pc. there're a few reasons not to be recognized the hdd on post process. Cable, power, motherboard and hdd should be checked one by one. Hope everything goes well.
@@leerizzardo960 i downloaded this app called yumi, and i made an external usb and that helped, but also i have another question, on winver 1809 i cant use wifi with it for some reason, it just dosnt work and its stuck on ethernet, and i wanna be able to do other stuff on it, please help! ive watched 30 + tutorials and nothing has helped
@@leerizzardo960 what is 21h1, also i need that exact version of windows 10, aka winver 1809, for something i am working on. but sadly i cant use wifi on it :( no matter what i do my wifi drivers wont appear on it, any fix?
I dl'd another Win10 onto a new USB. This should work but does not. I mean, it shows up and takes me to the dark blue screen showing US keyboard, I select repair then it goes back to (light blue) troubleshooting screen. So I select 'CD/usb etc' button and it goes back to dark blue screen etc. - yet another loop! Should I have chosen UK keyboard maybe? Even following your excellent video, I must have done something wrong.. One bit of good news: I was able to save my files using command prompt, a very slow but steady process. Note: I have to tell you the reason I like your video so much is because your ASUS screen looks exactly the same as mine so I thought I could not go wrong. Seems I was wrong. Been trying to fix this BSOD since 20th January. Getting really fed up with it now. If only I had a clue about what is causing it ie. corrupt reg, driver, windows, malware, hardware - anything. There has to be someone or some utility that can find the culprit, surely? Really do not want to do factory reset, but it is looming closer. ((sigh))
Hello, maybe you're now getting tough situation. As you may know, the BSOD is not easy to figure it out. but you can find it out what the reason is. let me guide you how to solve for this kind of an ordeal in your life. First of all, remove all dust in the computer. It could be highly helpful to blow it away with high compressor. and then clear dust on the copper part of a memory and graphic card. Do it test your machine whether the big trouble was disappeared. If you still got a headache, try to simulate the next steps. Now, let's check it in the following order. 1. Clean up the storage device where the operating system is installed (remove unnecessary programs, etc. - It is very helpful to download and run the optimization app from the Internet) 2. If there is an extra storage device, install the OS (remove the existing HDD), check if the BSOD is reproduced. 3. If you have installed multiple rams, insert only one and remove the rest before testing. 4. Check the CPU for grease Hope everything goes well.
I did the same as the video, but I installed with a CD. I can't boot with cd :(, the boot option is only there with my SSD, but the cd drive is not readable. And after I reboot it just gets stuck on the ASUS logo, I can't click F2 / Del, but when I take out the windows dvd he back again to the ASUS bios :)). What should i do ?
Why don't you make the bootable USB not DVD ? if you are available to make it, please follow next steps. 1.check that DVD is bootable 2.if #1 is fine, select the DVD as #1 priority device to boot on BIOS menu
i haven't try to use usb, but i will try if with cd/dvd not work. Oh i wanna ask, in the usb bootable/dvd what usually type of file? Such as folder-folder or 1 file type ISO ? before that i wanna say thanks for replying my comment :p
@@cepmumtaz you can refer to the below link. Downloading Windows 10 Booting files with MediaCreationTool ua-cam.com/video/WZiRa9V3GRw/v-deo.html How to Create the USB booting disk by MBR and GPT Type ua-cam.com/video/cpQINCkbRZ8/v-deo.html
Hi Lee. Very good video! I am trying to save some files from my BSOD desktop. Before entering Asus Uefi bios EZ Mode, I plugged in a new 2TB Seagate external hard drive to transfer the files to. And inserted the Windows 10 Pro usb, but this removable device does not show in list (unless I am mistaken). My BOOT PRIORITY list shows the following: 1) Windows Boot Manager (Intel SSDPEKNW512G8) 2) Intel SSDP... (same as above) 3) SATA6G_4: ASUS... (Blu-ray disc drive) I am just learning about bios and repair (thanks to recent MS updates) so am being very careful! Can you advise please?
There are several reasons why the external hard drive is not visible. First of all, you need to check whether the USB port to which the external hard drive is connected is working properly. Check if the external hard drive is properly recognized by another PC. Now, assuming that the external hard drive and USB port are working normally, let's find a solution. It is not booting from an external hard drive, so please check the following items by booting Windows with the existing boot device. It is necessary to check whether the information of the external hard drive is registered in Device Manager - 'Disk Drive'. If registered, Press "winkey" + "R" at the same time to enter "diskmgmt.msc", then check if there is an external disk and proceed with formatting If not registered, Recheck whether the USB port, cable, or external hard drive is working and try the above process.
@@leerizzardo960 Thank you so much for your fast response! I will follow your instructions and let you know result. Btw, does it matter which usb ports are used, ie. front of pc or back?
@@leerizzardo960 Tried on my other (win7) pc: the seagate sata drive shows up but the Win10pro usb (I got with pc) is not recognized. So I will have to make/get another which will hopefully solve the issue and allow me to save my files. Thank you for pointing this out!
please I need help what do I need for my storage info and boot priority to come up. I’ve been sitting here for 7 hours not being able to find anything that helps
@@CoyoteSwapEverything The motherboard isn't that old, and the bios version is up to date, so there's no problem. If the storage device and boot priority are not visible in the bios menu, it means that the installed storage device is not recognized by the computer. So try plugging in another storage device or attaching the storage device to another computer to see if the information you want to see isn't showing up. Also, check that the cable is properly plugged into the storage device. Hope everything goes well.
I do this and select the usb drive for booting but it just sends me to the black screen that says "Reboot and Select proper Boot device". And yes the usb has the Windows 10 ISO file.
bro i have asus prime h310 motherboard i just want to boot from usb pendrive for windows installing can you please tell me how to do that after entering the bios
Hmm. Doesn't this video helpful for your situation? Ok, then let me put it in this way. Assuming that the USB is bootable, follow each step. 1.Insert the USB into your PC 2.Press F2 or Del key when power on 3.Go to Boot tab in the BIOS setup menu 4.Select the USB as the first priority for booting 5.Save all setting with F10 6.Rebooting 7.Press any key when you can see this sentence on black screen : "press any key to boot from usb" 8.It will be started to install the OS you want. Hope it would be helpful for your wishes.
@@leerizzardo960 i have a doubt i just want to know is it necessary to do the priority setting can't i directly press the f8 key after entering bios and select the usb pendrive to boot ??? please clear this doubt
@@mdzeeshan49 Hello, the F8 key can be also entering BIOS menu directly. this is the hot key to enter the way easily but I want to go into the menu and check and set it without setting it with the hotkey. as you can see there're so many ways to do thing, try to do what you want, if the way is right to do.
You need to check that. 1.Is the USB bootable? if not, please refer to this video -> ua-cam.com/video/cpQINCkbRZ8/v-deo.html 2.If USB is bootable, please insert the USB into the other PC. then you might know that the USB would be useful. 3.If there's no problem after above process done, it might need to be the CMOS clear -> ua-cam.com/video/52rB-JAkv9A/v-deo.html (3:30) 4.If the above solution results in the same symptom, it could be a board problem. Hope the above will help.
Hello, the POST process cannot be continued due to below reasons. 1.The storage device installed with the operating system is not recognized. 2. Some hardware in your computer has the trouble to process There is a problem with the part itself, but it may be defective due to dust. So remove all dust in the computer and stains on the copper part of a memory stick and graphic card.
which means usb or hdd device has been the first priority on your pc. then you need to check that the devices are bootable or not. please refer to the video for how to make the bootable one in my youtube channel.
first, the usb should be tested on the other computer. second, for double checking, the other usb would be readable on the pc. third, try to insert into usb 2.0 port.
necesita descargar "MediaCreationTool ~" del sitio web de Microsoft. go.microsoft.com/fwlink/?LinkId=691209 haga clic en el enlace y siga el procedimiento. Windows para obtener la herramienta sería el tipo UEFI. Si creó el USB de arranque que incluye Windows, puede instalarlo usted mismo. Espero que todo esté bien. you need to download the "MediaCreationTool~" from Microsoft website. go.microsoft.com/fwlink/?LinkId=691209 please click the link then follow the procedure. the Windows from getting the tool would be the UEFI type. If you made the bootable USB including Windows, you can install it by yourself. Hope everything would be fine.
Hello, the error you got seems to be not booted on your computer. so here's some solution. please follow the guide as below. 1. check if the usb is really bootable device. 2. check if the security boot option is disabled status. 3. check if the partition scheme of an usb is uefi or legacy
Hello, can you check below steps for your issue? 1. check that the booting disk is readable in the other port. (other storage can be connected in the first port) 2. check that the booting disk can be recognized in the other computer.
@@leerizzardo960 hey buddy! Yeah I figured out what I did so let me explain. I decided I was going to over clock my PC and went to the "EZ tuning wizard" and the first window that comes up is the "from AHCI to RAID" and has a disclaimer stating if I enable RAID it may cause system boot failure and system is NOT recoverable. And I clicked yes and it nuked my c drive.. sigh so I ended up just reinstalling my OS and I'm just about done now. Thanks so much for responding but it was my error.
Hi, thank you for the video, I have a build with asus prime b450-plus MOBO, we have the same uefi, I installed windows 10 pro on it. My problem is that I can't access bios, after turning on my pc I have a black screen(HDMI) with not connected message, after few seconds I will have my windows logon screen and I can log with no pbm. I tried the good keys (F2 & DEL), tried to access the uefi from windows (the fast boot is off) , tried to clear the cmos by removing the battery, connecting the CLRTC pins, I used ps/2 and usb keyboard and still not working. I will be very grateful if you have something that can help me. Thank you again.
Let's summary your situation. 1. Installed Windows 10 pro 2. OK for Windows booting 3. but you can't enter the BIOS setup menu using USB or PS/2 keyboard Am I right ? ok good, please try next step. 1.Can you test the keyboards (USB and PS/2) on the other computer ? 2.If the function of keyboards have no problem, try to enter the BIOS menu with pressing "F2" or "Del" key as soon as power on. (in this case of "Pressing" , hit the key with tok, tok, tok like this , not pressing continually the key) 3.Enter the bios menu after removing the cable from HDD or SSD. this action will be checked that the storage is fine or not. The storage might interfere you to enter BIOS. 4.Try to clear the CMOS once more then wait for 5mins. after that try again. 5. If above actions have no solution any more, the mainboard could be the malfunction situation. try to A/S at your local ASUS center.
@@leerizzardo960 My USB Boot Only MBR When I Trying In GPT It Doesn't Work Error Showing Only Legacy Mode Support 😕 I Need To Install In GPT I Have Already MBR
i have a problem when i try to boot into my usb device an error will pop up saying "[secure boot violation] invalid signature detected. check secure boot policy in set up" do i need to disable it im too afraid of bricking my pc
That's right, I'm not in an English-speaking country, so I don't speak English as fluently as an English-speaking UA-camr. Thank you very much for your understanding
The symptom that USB doesn't list up in BIOS would be came from a couple of reasons. which means you need check whether your USB is readable on the other computer or the function of computer has been tested is capable to read the USB device and also please check legacy booting can be ok in your system. hope it would be help you.
@@leerizzardo960 hej das war positiv gemeint ich habe 3tage nicht gewusst was ich tun soll dan 10-15viedeos geguckt und wirklich dein viedeo hatt einfach First try funktioniert konnte mein asus pc endlich platt machen
hello. please take the steps. need to check whether the usb detect in the other pc. check that your usb is bootable device. everything is ok. download the windows in your usb once more. hope it gonna be fine.
@@leerizzardo960 But thank you so much I Have installed SSD 2years back but don't know about BIOS boot settings priority That was feeling laghu Yesterday after seeing your tutorial I found it and made bios boot priority for ssd and HDD for storage Would you suggest me any more tips to make pc faster and smooth
@@sairohit5414 please check whether the ssd fine and also find out that the os installed in your pc has no problem. to make booting faster, it should be checked whether the other hardwares are good.
for happening the black screen, bunch of reasons might give the error. so try to check your computer one by one. in terms of hardware, remove all dust inside system including erasing dust on memory stick. and also verify your HDD whether faulty symptom has.
@@leerizzardo960 cud it occur if i hard shutdown my pc. I mean if the shutdown corrupted my booting files. Dust might not be the issue cuz this occured after a stupid windows 10 autoupdate
Hei, guy. what stands for "Bhai Bois" ? if this would be one of game or some application, the reason of flicking could be so many cases. first of all, you need to check the monitor. then find out whether the resolution on windows display setting is right. the other scenario would be the graphic card. it also gives a flicking symptom. take out the graphic card then erase dust on copper part of it. next solution will be the operating system. you can reinstall it if above methods aren't the solution any more. hope these actions could be what you want.
@@leerizzardo960I understood your English just fine, but the problem for me is when I press like you said in the video it took me back into BIOS lol. Trying to boot from usb. My usb has an ISO that suppose to run to test to see if my Ram is having problem not not.
If you want to make the booting usb, you can refer to below link. ua-cam.com/video/cpQINCkbRZ8/v-deo.html then follow the way to set an usb booting with this video. hope everything goes well.
A man, who's first language I can tell isn't English, just solved my issue that hundreds of videos from professional computer builders could not... Thank you Lee
your welcome. it's my pleasure.
@John Hadleigh Thanks John. your comment would be pretty much helpful for the one who want to know the stmptom you described. good job.
It got straight to the point and was easy to understand, thanks I needed a video like this man
I'm pleasure that you've got a solution with my video.
Thank You so Much. I spend like 4 hours looking for this it was the F8 what I needed and with your video 2 min. Thanks
Appreciated my video was helpful. good luck.
Thanks bro event after 6 years helpfull you are my Saviour right now
It's my pleasure. thank you for visiting my channel.
Hello! Thanks a lot for your video, you are the only one who could fix my problem❤❤❤
It's my pleasure. Good luck.
I searched about asus bios and there he is found it. Thank youu
I'm glad my video was helpful. Thank you for watching the video.
Thank you so much it worked actually for me i was stuck other videos left me confused you explained everything very well :)
I'm also glad that it helped.
'Subscribe' and 'Like' are a great help in making better videos. ^^
can i just press f8 key to boot from my pendrive without doing the first part
Refer to the answers to your other questions below.
Should it make a difference if i downloaded the windows boot from a mac to transfer it to my new pc ?
you mean that windows booting file was downloaded from mac then the file will be used in your new pc , right?
if the USB booting disk is available to boot in new pc, it could be performed to setup.
Hi Lee I tried what you recommended but when I press F8 and then select my USB to boot from the screen then just shows a flashing white line instead of "press any key to boot from USB"
It might be not recognized the USB or any of storage in your computer. so try to change the other USB.
Thank you so much!! You've saved me a lot of time :) keep it up!
It's my pleasure. Thank you for watching this movie.
Hello, I'm French before I pressed boot menu but it doesn't work it makes me an error code. So if I do its, it will have to walk?
Hello, please write down the error code you got. don't mind any question in French.
i have a problem, my pc always looping to automatic repair. so I decide to reinstall windows, after tried so many ways with troubleshoot options, none of them are working. but when booting from USB, after press any keys, its always go back to automatic repair. any suggestions bro,?
There seems to be a problem not only with the software, but also with the hardware. Even after reinstalling the operating system, it continues to go into the recovery option, so you need to suspect the hardware side. First, remove all dust from the computer, wipe the copper plate of the memory with an eraser, remove the CPU fan, and then apply grease properly.
Now, try booting and see if you get the same problem.
Nevertheless, if the first problem is reproduced, each hardware should be replaced and tested.
In other words, replacing the memory -> storage device -> motherboard in the order of finding the cause.
hope everything goes well.
Thank you man❤
It's my pleasure. Good luck.
ok question, will i able to wipe out my old hdd with windows 7 and drivers in it and install a new windows 10 on the drive... im upgrading to ryzen and it only support windows 10
yes, sure. you can refer to below link.
it can guide you how to install windows10 in your new system. no need to delete old status specially. the installation includes a format function which means removing the old data.
ua-cam.com/video/vyiKQO41YjM/v-deo.html
@@leerizzardo960 but if I do not wipe the drive the old motherboard drivers will have conflicts with the new motherboard?
@@snaper0218 sure it is. but don't mind the installation process will clear all previous status.
Hey great video! You helped alot forreal. I just have 1 question what if my ssd card doesnt show up on the boot priorites? How would i add it or fix it to show up?
ok. please check that your ssd would be operated or not. which means every device should be readable on BIOS menu. The other way is that you can test the ssd to put it in another computer. if the device is bootable, you can use the computer.
@@leerizzardo960 this is my only build i have a laptop but thats it and its the crucial 1tb ssd firsr start up for the pc
why my bios, when I want to change / try to disable the secure bot, can't be changed at all? secure boot locked, is there a solution to my problem? thank you
normally secure boot option can be changed but your case has something wrong function. so recommend you to flash the bios.
Hey can you help me out? i got the same thing as you but i get an exf remove disks or other media reboot and select proper boot device. i have it on legacy only
Hello, can you describe it in detail ? I don't know exactly what you're talking about.
What do you do if its stuck on the bios screen and doesn't respond to f8 command? I can't even boot off the USB to reformat the SSD (the source of the problem).
First, remove the dust inside the computer body using a high-pressure compressor and try again.
If this doesn't work, you need to verify each part one by one.
In other words, try after removing the SSD, try after removing the graphics card, etc.
@@leerizzardo960 ahh thanks. Bad windows 11 install on SSD. Ran a repair and now it’s good to go! Thanks !
Hi, what CHA FAN do you use ? 3 pin or 4 pin? In the manual it is PWM CHA FAN control, it seems you cannot switch it to DC mode like in MSI motherboards. Could you confirm please? I was refering to ASUS H410M models...
Hello, normally the pinout would be 4 pins (FAN PWM/FAN IN/FAN PWR/GND) on the mainboard.
As you may know, FAN PWR & GND are +12V and common ground respectively.
FAN PWM is the Pulse Width Modulation (PWM) input signal that can control the cooling rate and also saving energy if the full speed is not required.
FAN IN is the outputs a signal that pulses twice for each revolution of the fan as a pulse train, with the signal frequency proportional to the fan speed.
In conclusion, if you have 3pins, insert the fan header from the right end.
Otherwise, connect according to the pin.
can you help me the hard drive bbs priority is not showing the usb to prioritize its boot its only showing the ssd as boot option
can you check the usb is readable on your pc?
Help me , the controller for the install the windows not detected in my ush, and I have it installed :( your have a solution?
hello, i don't understand your question. can you ask me your problem in your language?
Does this work on a pre built I choose not to come with windows
hello, can you let me know more information for the situation of your malfunction ?
what do you want to do?
if you want to install the windows in your computer, please check below.
1.bootable usb with windows
2.disk type-mbr or gpt
3.bios setting-usb needs to be on the top priority in boot list
4.HDD or SSD - check whether the devices can be seen in boot list
hope it can be helpful
F8! Nice I was unaware of that, nice thing to know. Thanks chisel chest!
You're welcome. Thank you for visiting my channel.
This really helped my idiotic friend he doesn't know how to be a gamer.
you're welcome. thanks for visiting my video.
@@leerizzardo960 No problem cap thanks for making one for this motherboard.
sir, after this reboot , are we gonna lose our files , software etc2 , or everything does still remain
If you install the windows with USB, all files in the storage would be deleted. so try to backup all of your important files in the other storage.
Help me , here is saying (Reboot and select proper boot device or insert boot media in selected booy device and press a key) what i do ,
Let me ask you below.
What are gonna do in this situation?
1.for Windows Installation
-> please check your usb is bootable or not.
-> if USB is bootable, check again that USB boot sequency would be the top priority in Boot menu.
-> if USB is not bootable device, please follow this link.
ua-cam.com/video/cpQINCkbRZ8/v-deo.html
2.for Windows booting
-> whether the HDD or SSD is bootable or not
-> if yes, try to do above #1's way.
3.although #1 & #2 were not the solution in your pc, please consult with local A/S center for your computer.
Hope my explain will be helpful.
when i try to boot my usb, my screen flashes black then goes straight back into the bios, what does this mean?
which means your computer doesn't identify the first storage for booting in bios procedure. So need to find out whether the storage is readable in the other pc. there're a few reasons not to be recognized the hdd on post process. Cable, power, motherboard and hdd should be checked one by one.
Hope everything goes well.
@@leerizzardo960 i downloaded this app called yumi, and i made an external usb and that helped, but also i have another question, on winver 1809 i cant use wifi with it for some reason, it just dosnt work and its stuck on ethernet, and i wanna be able to do other stuff on it, please help! ive watched 30 + tutorials and nothing has helped
@@virade9116 it couldn't be different with the winver. why don't you try to install 21h1 or 21h2 in your computer.
@@leerizzardo960 what is 21h1, also i need that exact version of windows 10, aka winver 1809, for something i am working on. but sadly i cant use wifi on it :( no matter what i do my wifi drivers wont appear on it, any fix?
@@virade9116 you can download the windows 10 version on a search engine as "windows 21h2 download". this version was updated on Nov 2021.
What is the difference between UEFI: SanDisk, Partition 1 (14875MB) and SanDisk (14875MB)
same device.
I dl'd another Win10 onto a new USB. This should work but does not. I mean, it shows up and takes me to the dark blue screen showing US keyboard, I select repair then it goes back to (light blue) troubleshooting screen. So I select 'CD/usb etc' button and it goes back to dark blue screen etc. - yet another loop! Should I have chosen UK keyboard maybe? Even following your excellent video, I must have done something wrong..
One bit of good news: I was able to save my files using command prompt, a very slow but steady process.
Note: I have to tell you the reason I like your video so much is because your ASUS screen looks exactly the same as mine so I thought I could not go wrong. Seems I was wrong. Been trying to fix this BSOD since 20th January. Getting really fed up with it now. If only I had a clue about what is causing it ie. corrupt reg, driver, windows, malware, hardware - anything. There has to be someone or some utility that can find the culprit, surely?
Really do not want to do factory reset, but it is looming closer. ((sigh))
Hello, maybe you're now getting tough situation. As you may know, the BSOD is not easy to figure it out. but you can find it out what the reason is. let me guide you how to solve for this kind of an ordeal in your life.
First of all, remove all dust in the computer.
It could be highly helpful to blow it away with high compressor.
and then clear dust on the copper part of a memory and graphic card.
Do it test your machine whether the big trouble was disappeared.
If you still got a headache, try to simulate the next steps.
Now, let's check it in the following order.
1. Clean up the storage device where the operating system is installed (remove unnecessary programs, etc. - It is very helpful to download and run the optimization app from the Internet)
2. If there is an extra storage device, install the OS (remove the existing HDD), check if the BSOD is reproduced.
3. If you have installed multiple rams, insert only one and remove the rest before testing.
4. Check the CPU for grease
Hope everything goes well.
I did the same as the video, but I installed with a CD. I can't boot with cd :(, the boot option is only there with my SSD, but the cd drive is not readable. And after I reboot it just gets stuck on the ASUS logo, I can't click F2 / Del, but when I take out the windows dvd he back again to the ASUS bios :)). What should i do ?
Why don't you make the bootable USB not DVD ? if you are available to make it, please follow next steps.
1.check that DVD is bootable
2.if #1 is fine, select the DVD as #1 priority device to boot on BIOS menu
i haven't try to use usb, but i will try if with cd/dvd not work. Oh i wanna ask, in the usb bootable/dvd what usually type of file? Such as folder-folder or 1 file type ISO ? before that i wanna say thanks for replying my comment :p
@@cepmumtaz you can refer to the below link.
Downloading Windows 10 Booting files with MediaCreationTool
ua-cam.com/video/WZiRa9V3GRw/v-deo.html
How to Create the USB booting disk by MBR and GPT Type
ua-cam.com/video/cpQINCkbRZ8/v-deo.html
@@leerizzardo960 whoaaa thanks dude🙌🏻
Thank you so much! You saved my life 🙏🙏🙏
It's my pleasure. Thank you for watching my video.
Hi Lee. Very good video!
I am trying to save some files from my BSOD desktop.
Before entering Asus Uefi bios EZ Mode, I plugged in a new 2TB Seagate external hard drive to transfer the files to. And inserted the Windows 10 Pro usb, but this removable device does not show in list (unless I am mistaken). My BOOT PRIORITY list shows the following:
1) Windows Boot Manager (Intel SSDPEKNW512G8)
2) Intel SSDP... (same as above)
3) SATA6G_4: ASUS... (Blu-ray disc drive)
I am just learning about bios and repair (thanks to recent MS updates) so am being very careful!
Can you advise please?
There are several reasons why the external hard drive is not visible.
First of all, you need to check whether the USB port to which the external hard drive is connected is working properly.
Check if the external hard drive is properly recognized by another PC.
Now, assuming that the external hard drive and USB port are working normally, let's find a solution.
It is not booting from an external hard drive, so please check the following items by booting Windows with the existing boot device.
It is necessary to check whether the information of the external hard drive is registered in Device Manager - 'Disk Drive'.
If registered,
Press "winkey" + "R" at the same time to enter "diskmgmt.msc", then check if there is an external disk and proceed with formatting
If not registered,
Recheck whether the USB port, cable, or external hard drive is working and try the above process.
@@leerizzardo960 Thank you so much for your fast response! I will follow your instructions and let you know result. Btw, does it matter which usb ports are used, ie. front of pc or back?
@@MissIdolize can be use anywhere
@@leerizzardo960 Tried on my other (win7) pc: the seagate sata drive shows up but the Win10pro usb (I got with pc) is not recognized. So I will have to make/get another which will hopefully solve the issue and allow me to save my files.
Thank you for pointing this out!
please I need help what do I need for my storage info and boot priority to come up. I’ve been sitting here for 7 hours not being able to find anything that helps
Hello, can you share below infomation with me ?
1. model name of the motherboard
2. bios version
@@leerizzardo960 prime a520m-a ll and I believe the bio is 2803
@@CoyoteSwapEverything
The motherboard isn't that old, and the bios version is up to date, so there's no problem.
If the storage device and boot priority are not visible in the bios menu, it means that the installed storage device is not recognized by the computer.
So try plugging in another storage device or attaching the storage device to another computer to see if the information you want to see isn't showing up.
Also, check that the cable is properly plugged into the storage device.
Hope everything goes well.
@@leerizzardo960 okay I’ll try this thanks
I do this and select the usb drive for booting but it just sends me to the black screen that says "Reboot and Select proper Boot device". And yes the usb has the Windows 10 ISO file.
not iso file but should be the installing usb.
you can refer to my video to make the installing usb on my channel.
@@leerizzardo960 I resolved the issue but thanks for responding. Turns out I had to make the USB bootable and I just had the ISO file on it.
bro i have asus prime h310 motherboard i just want to boot from usb pendrive for windows installing can you please tell me how to do that after entering the bios
Hmm.
Doesn't this video helpful for your situation?
Ok, then let me put it in this way.
Assuming that the USB is bootable, follow each step.
1.Insert the USB into your PC
2.Press F2 or Del key when power on
3.Go to Boot tab in the BIOS setup menu
4.Select the USB as the first priority for booting
5.Save all setting with F10
6.Rebooting
7.Press any key when you can see this sentence on black screen : "press any key to boot from usb"
8.It will be started to install the OS you want.
Hope it would be helpful for your wishes.
@@leerizzardo960 i have a doubt i just want to know is it necessary to do the priority setting can't i directly press the f8 key after entering bios and select the usb pendrive to boot ??? please clear this doubt
@@mdzeeshan49 Hello, the F8 key can be also entering BIOS menu directly. this is the hot key to enter the way easily but I want to go into the menu and check and set it without setting it with the hotkey. as you can see there're so many ways to do thing, try to do what you want, if the way is right to do.
Can you help me dude? I following the vídeo but, when I start I just get an orange scream
Hi, can you tell me much more detail situation on you ? or take a picture and then send to me :
comonkei@gmail.com
hopefully this works for me lol thanks bro
You're welcome. Thanks a lot for watching this clip.
Hi how can i exit this page I already tried to press f10 but it comes back to same page, i pressed f5 is e comes back again could you help me please ?
You need to check that.
1.Is the USB bootable? if not, please refer to this video -> ua-cam.com/video/cpQINCkbRZ8/v-deo.html
2.If USB is bootable, please insert the USB into the other PC. then you might know that the USB would be useful.
3.If there's no problem after above process done, it might need to be the CMOS clear -> ua-cam.com/video/52rB-JAkv9A/v-deo.html (3:30)
4.If the above solution results in the same symptom, it could be a board problem.
Hope the above will help.
my pc stuck on asus logo screen what i have to do?
Hello, the POST process cannot be continued due to below reasons.
1.The storage device installed with the operating system is not recognized.
2. Some hardware in your computer has the trouble to process
There is a problem with the part itself, but it may be defective due to dust.
So remove all dust in the computer and stains on the copper part of a memory stick and graphic card.
I did what you did on a ASUS TUF B450 GAMING PLUS and it says "Bootmgr is missing Press Ctrl+Alt+Del to restart"
which means usb or hdd device has been the first priority on your pc. then you need to check that the devices are bootable or not. please refer to the video for how to make the bootable one in my youtube channel.
Helped me out so much thank you
Thank you for watching the video.
Asus h310 safe mode key?
Hello, please refer to below links for yours
ua-cam.com/video/xzuzKriUI0U/v-deo.html
www.asus.com/support/FAQ/1013018/
Bro same motherboard but pendrive not showing...how i solve it...?
first, the usb should be tested on the other computer.
second, for double checking, the other usb would be readable on the pc.
third, try to insert into usb 2.0 port.
Thank you bro.you are the best🔥❤🔥❤
It"s my pleasure. Thank you for visiting my channel.
@@leerizzardo960 🔥❤
Hola.como hago para que me aparezca ese estilo de BIOS uefi en mi placa??.. a mí me aparece la versión antigua..
necesita descargar "MediaCreationTool ~" del sitio web de Microsoft.
go.microsoft.com/fwlink/?LinkId=691209
haga clic en el enlace y siga el procedimiento.
Windows para obtener la herramienta sería el tipo UEFI.
Si creó el USB de arranque que incluye Windows, puede instalarlo usted mismo.
Espero que todo esté bien.
you need to download the "MediaCreationTool~" from Microsoft website.
go.microsoft.com/fwlink/?LinkId=691209
please click the link then follow the procedure.
the Windows from getting the tool would be the UEFI type.
If you made the bootable USB including Windows, you can install it by yourself.
Hope everything would be fine.
for me after i do everything it just says “reboot and select proper boot device,or insert boot media in selected boot device and press a key
Hello, the error you got seems to be not booted on your computer. so here's some solution. please follow the guide as below.
1. check if the usb is really bootable device.
2. check if the security boot option is disabled status.
3. check if the partition scheme of an usb is uefi or legacy
@@leerizzardo960 thank you but where do i find the secure boot option? i got this pc yesterday and im new to all this
@@petitegaming5524 share your model of the computer
@@leerizzardo960 i have an asus h410m motherboard
@@petitegaming5524 Hello, you can set what you want as below path.
In BIOS Menu, Boot > Secure Boot
I did something and lost my boot drive. It reads all the storage devices but my boot drive is gone.. help
Hello, can you check below steps for your issue?
1. check that the booting disk is readable in the other port. (other storage can be connected in the first port)
2. check that the booting disk can be recognized in the other computer.
@@leerizzardo960 hey buddy! Yeah I figured out what I did so let me explain.
I decided I was going to over clock my PC and went to the "EZ tuning wizard" and the first window that comes up is the "from AHCI to RAID" and has a disclaimer stating if I enable RAID it may cause system boot failure and system is NOT recoverable. And I clicked yes and it nuked my c drive.. sigh so I ended up just reinstalling my OS and I'm just about done now.
Thanks so much for responding but it was my error.
1:19 How did u do that and how did u also do this 1:52
I was confused how did u shut off the computer
Please reply
after you change some kind of value at the BIOS menu, only power switch can shut down your system.
I need to have download the windows system or no??
Please try to search "windows 10 download" on the search engine.
Lee Rizzardo says not found
Lee Rizzardo you say in the bios
@@mrhubz778 can you clarify your question more detail? then I can help you.
what do you want to do?
can i install a new windows for the password to be removed
yeah, sure all settings will be deleted when windows is installed.
Thank a lot Love from India
thank you so much.
Hi, thank you for the video, I have a build with asus prime b450-plus MOBO, we have the same uefi, I installed windows 10 pro on it.
My problem is that I can't access bios, after turning on my pc I have a black screen(HDMI) with not connected message, after few seconds I will have my windows logon screen and I can log with no pbm.
I tried the good keys (F2 & DEL), tried to access the uefi from windows (the fast boot is off) , tried to clear the cmos by removing the battery, connecting the CLRTC pins, I used ps/2 and usb keyboard and still not working.
I will be very grateful if you have something that can help me.
Thank you again.
Let's summary your situation.
1. Installed Windows 10 pro
2. OK for Windows booting
3. but you can't enter the BIOS setup menu using USB or PS/2 keyboard
Am I right ? ok good, please try next step.
1.Can you test the keyboards (USB and PS/2) on the other computer ?
2.If the function of keyboards have no problem, try to enter the BIOS menu with pressing "F2" or "Del" key as soon as power on.
(in this case of "Pressing" , hit the key with tok, tok, tok like this , not pressing continually the key)
3.Enter the bios menu after removing the cable from HDD or SSD. this action will be checked that the storage is fine or not. The storage might interfere you to enter BIOS.
4.Try to clear the CMOS once more then wait for 5mins. after that try again.
5. If above actions have no solution any more, the mainboard could be the malfunction situation. try to A/S at your local ASUS center.
Hey Man USB Drive Not Showing In HHD Boot Priority
Hello, does your usb operate well? please check the usb into the other device
@@leerizzardo960
My USB Boot Only MBR When I Trying In GPT It Doesn't Work Error Showing Only Legacy Mode Support 😕 I Need To Install In GPT I Have Already MBR
You have helped me thank you 😂
thank you for watching the clip.
i have a problem when i try to boot into my usb device an error will pop up saying "[secure boot violation] invalid signature detected. check secure boot policy in set up" do i need to disable it im too afraid of bricking my pc
Here's the link what you want.
The blog was written in korean but you can translate it into your language.
rizzardo-blog.tistory.com/233
@@leerizzardo960 thank you bro
This video is helpful Thanks a lott bro 😘😘😘
It's my pleasure. Thank you for watching this movie.
Good vibes fron germany
Willkommen auf meinem Kanal.
frohes neues Jahr.
My brother can't find solution, it only shows the USB not SanDisk..
try to test the usb on another pc.
My ssd is not being detected. What to do. Please help
ok, let me ask you. does the ssd new one? then check whether the cables are correctly connected on the motherboard.
@@leerizzardo960 Yes new. But cheap one from China with no warranty
@@rezaulkhan9809 then please check whether new ssd is readable in the other pc.
even if hes english is not that good i understood fast thank you
That's right, I'm not in an English-speaking country, so I don't speak English as fluently as an English-speaking UA-camr.
Thank you very much for your understanding
thanks Bro.... helped me a lot 👍
appreciated that you got a solution from my video.
The usb drive does not show up in my settings
The symptom that USB doesn't list up in BIOS would be came from a couple of reasons. which means you need check whether your USB is readable on the other computer or the function of computer has been tested is capable to read the USB device and also please check legacy booting can be ok in your system. hope it would be help you.
I have the same issue :/ trying to install original windows 10
In my computer asus comes two times why?at first
Hello, can you describe your issue in more detail?
My brother thank you so so much 🥺
it.s my pleasure. glad to hear that you got a solution from my video.
when i enter it appears orange with white line in my screen.pls help
can you share the error message with me ? then you might get the solution soon.
@@leerizzardo960 how to share to you. i have only screenshot
@@shortsvedioscreator send the image to comonkei@gmail.com
@@leerizzardo960 i have already bootable drive and i already boot it.but when i set up the microsoft windows 10 pro it has a error
@@leerizzardo960 its says a media driver of the computer is missing
Zu viele Bleiben an dem scheiss hängen das viedeo hatt 1zu1 gezeigt wie es geht sehr sehr gutes viedeo bei mir hatt es nach 2-3min geklappt 😎👌🏼👀
Was ist mit meinem Video los?
Welcher Teil hat dir nicht gefallen?
Auf jeden Fall ein frohes neues Jahr.
@@leerizzardo960 hej das war positiv gemeint ich habe 3tage nicht gewusst was ich tun soll dan 10-15viedeos geguckt und wirklich dein viedeo hatt einfach First try funktioniert konnte mein asus pc endlich platt machen
@@dstr9973 Es freut mich, dass mein Video hilfreich war.
frohes neues Jahr.
My stock on bios...is this gonna work?
Hello guy. can you let me know what's your problem on your board? just your question, could't figure it out.
Thanks alot man 🤘👍👍
Thank you so much
thank you man !
appreciated for watching this video
Thanks man👍
you're welcome. thank you for watching the video.
My usb not getting detected :(
hello. please take the steps.
need to check whether the usb detect in the other pc.
check that your usb is bootable device.
everything is ok. download the windows in your usb once more.
hope it gonna be fine.
How can i remove the password
Hello, which password are you talking about? to go to BIOS or windows?
So many thanks u have
thank you so much.
Thank you bro may Allah reward you
Appreciated. good luck.
thank you!!!
It's my pleasure. Good luck.
I need your mail id
Bcoz I couldn't find my ssd on bios
hello, can you describe your situation with all of us in this reply's board?
@@leerizzardo960 No thanks!!
Problem fixed
@@sairohit5414 that's good.
@@leerizzardo960 But thank you so much
I Have installed SSD 2years back but don't know about BIOS boot settings priority
That was feeling laghu
Yesterday after seeing your tutorial I found it and made bios boot priority for ssd and HDD for storage
Would you suggest me any more tips to make pc faster and smooth
@@sairohit5414 please check whether the ssd fine and also find out that the os installed in your pc has no problem. to make booting faster, it should be checked whether the other hardwares are good.
Thanks my guy
highly appreciated.
HELPFUL VIDEO
you're welcome. thank you fou watching the video.
Legend
Thank you for watching my video. good luck.
Thanks a lot.
It's my pleasure. thank you for visiting my channel.
Is this Russian language?
haha. English.
After the last logo of windows 8 i amm having an endless blank screen
for happening the black screen, bunch of reasons might give the error. so try to check your computer one by one. in terms of hardware, remove all dust inside system including erasing dust on memory stick. and also verify your HDD whether faulty symptom has.
@@leerizzardo960 cud it occur if i hard shutdown my pc. I mean if the shutdown corrupted my booting files. Dust might not be the issue cuz this occured after a stupid windows 10 autoupdate
@@surajselva1281 ok then recommend to install os after formatting the hdd.
@@leerizzardo960 thanks that should work
genius
appreciated you saw my video.
Thank You. 🙏
It's my pleasure. Thank you for watching this clip.
ty
thank you for watching my video.
THX
You're welcome. goog luck to you.
Plzz help
Hello, sorry for late response. did you solve it ?
Thanks
thank you for watching my video.
Te amoooooo
Gracias por ver mi vídeo
Thx
thank you for watching my video.
It's shift then F8...😁🇦🇺
yeah, if you press F8 key as soon as power-on, boot device would be seen for your selection.
Bhai Bois screen is flickring
Hei, guy. what stands for "Bhai Bois" ? if this would be one of game or some application, the reason of flicking could be so many cases. first of all, you need to check the monitor. then find out whether the resolution on windows display setting is right. the other scenario would be the graphic card. it also gives a flicking symptom. take out the graphic card then erase dust on copper part of it. next solution will be the operating system. you can reinstall it if above methods aren't the solution any more.
hope these actions could be what you want.
@@leerizzardo960 bhai in hindi means 'brother' and I think he mispelled bios
@@drunkpanda9301 thanks.
👍👍👍👍👍
thank you for watching my video.
dude
thank you for watching my video.
cant understand wtf u say
If you couldn't get this guide easily, please refer to my written comment in the video.
@@leerizzardo960I understood your English just fine, but the problem for me is when I press like you said in the video it took me back into BIOS lol. Trying to boot from usb. My usb has an ISO that suppose to run to test to see if my Ram is having problem not not.
What do I do if this won’t boot I just get black screen then it resets
can you share any message you got?
@@leerizzardo960 i got into bios but now don’t know how to boot normal or see where my recover stick is . I’m noob
If you want to make the booting usb, you can refer to below link.
ua-cam.com/video/cpQINCkbRZ8/v-deo.html
then follow the way to set an usb booting with this video.
hope everything goes well.