Unfortunately I sold the truck a couple weeks ago. Nothing was wrong with it. But definitely had more rub on the front wheel well where the front bumper ends. I trimmed off about an inch off the edge and I cleared it. I took off the plastic guard on the front wheel well bc it was rubbing on that. Couldn’t full turn without rubbing.
How about a 92 300Z with a carburetor Chevy 350 (450hp) and Chevy truck 700r4? I bought one on ebay out of North Carolina in 2003. 1OFF brand new custom. 3" hand fab rear widebody, Veilside wing, GT2 full body kit, 3 piece HRE wheels 18x9, 18x11. 7 coats jet black 3 coats clear. Painted the whole dash black and clear like exterior of the car. And a 1.5" cowl hood fab into the Nissan hood to allow the air cleaner to breath and close the hood. The police pulled me over in Texas before even got it home with it, with bogus claims, but they just wanted to look at it closer after pasing the trialer staring at it for miles. Yes I went with my 01 Ram 2500 and picked it up myself 🙂
good looking truck Bro! i have a 2016 laramie that was sold to me lifted 6 inches already. my lift looks different than yours though. I'm running 35s on 22 inch fuel wheels. do you have any rub at full turn? i want 38s but was wondering if i could fit them for daily use. thank you
It looks good but that bumper is super dangerous man. If a kid walk by there he can definitely get injured in a snap. Even you, one day you can be working on the truck and forget those sharp edges are there and bam. Stitches for days.
Have you tried looking at custom offsets gallery to see what others are running with your same truck? But asking me I’m sure you can fit. Everyone does a little trimming
Your truck turned out super clean 🤤👍
I see where your stimmy went 😂
Shhhhhh
For just a 6 inch lift that thing looks huge. Every other 1500 iv seen with a 6 inch lift is waaaaay smaller then that?…
he probably has some other stuff to give it more height looks like he’s pushing closer to 8-10 on his lift bro
Can be the tire size as well
My blades are great u won’t get stuck in mud
Could you make a vid on where it rubs basically showing how you can turn ? I don’t see anyone doing this may be able to get some good views
Unfortunately I sold the truck a couple weeks ago. Nothing was wrong with it. But definitely had more rub on the front wheel well where the front bumper ends. I trimmed off about an inch off the edge and I cleared it. I took off the plastic guard on the front wheel well bc it was rubbing on that. Couldn’t full turn without rubbing.
Handsome guy.
Awesome video man. New subscriber here!
Thanks for the sub!
That 300zx tho 👀
both 300zx will be coming on the channel soon
How about a 92 300Z with a carburetor Chevy 350 (450hp) and Chevy truck 700r4?
I bought one on ebay out of North Carolina in 2003. 1OFF brand new custom. 3" hand fab rear widebody, Veilside wing, GT2 full body kit, 3 piece HRE wheels 18x9, 18x11. 7 coats jet black 3 coats clear. Painted the whole dash black and clear like exterior of the car. And a 1.5" cowl hood fab into the Nissan hood to allow the air cleaner to breath and close the hood.
The police pulled me over in Texas before even got it home with it, with bogus claims, but they just wanted to look at it closer after pasing the trialer staring at it for miles. Yes I went with my 01 Ram 2500 and picked it up myself 🙂
Sheesh 🥜💦
good looking truck Bro! i have a 2016 laramie that was sold to me lifted 6 inches already. my lift looks different than yours though. I'm running 35s on 22 inch fuel wheels. do you have any rub at full turn? i want 38s but was wondering if i could fit them for daily use. thank you
With the 6in lift I did rub at full turn but I also ran 2 in when spacer so it helped a little. But it was a great ride with with 38s no problems
It looks good but that bumper is super dangerous man. If a kid walk by there he can definitely get injured in a snap. Even you, one day you can be working on the truck and forget those sharp edges are there and bam. Stitches for days.
the rams that don't have the fog lights definitely would of been the right way to go.
If ur bumber weren’t shaved from front how bad u think it rub or how much u think you’d have to cut
nice!!😁
hey bro what app do you use to record your videos i see they are mirror
Clean af
Song at 0:57?
Those big wheels and lift on a 1500
Equals zero problems for me lol
What brand are the 35s they look way wider
They’re amp tires and width was 15.50 I think.
How have the tires been working for you g I heard that brand ain’t all that great
They were perfect for my set up.
@@_No_Hilfiger have you had any problems what so ever
Bro what trim is it
What kind of bumper do you have?
Stock
Why’d you get rid of the amps? And how many miles did u get out of them
Like maybe 9k
35s looked small so I wanted to go bigger. Because the truck is gonna sit higher once I’m done.
Which TIS were those
544c
Where did u order the tires from
Arturo Tires
@@_No_Hilfiger thanks
Any wheel spacers on it?
2in spacers. I did make a video on that installation check it out !
@@_No_Hilfiger Can you buy and build one truck like this for me?
How’s the noise level?
Haven’t really driven the truck yet.
What size are the rims?
24x14 -76 offset
I got 37x13.50r24 on 24x14s on a 6in lift and the fit with little rubbing on pinch weld
I have a 2500 on this setup and still had to cut quite a bit
Do you remember what mpg you were getting with the 35s?
i think it was like 13-15
@@_No_Hilfiger serious question hope you respond when you got 24x14s on 35s did you have regear your transmission?
@@_No_Hilfiger i have 24x14 Tis 544 Bm on 33s should i regear bro ?
3in body?
Just a 6in lift. With 2 in spacer
@@_No_Hilfiger ik but u said u want to go higher so i said (3in body?) As in like are u getting a body lift
@@SouthEastTNCatfishinh yes already ordered
@@_No_Hilfiger yeah i plan on getting one soon
Where is the 3 inch body lift from
nice channel man do you think i could run 26x14 on 37s and clear on a 7 inch lift
Have you tried looking at custom offsets gallery to see what others are running with your same truck? But asking me I’m sure you can fit. Everyone does a little trimming
Those TIS are nice you should’ve got 26x14 but your truck still bad ass with 4s
On this next truck I’m thinking 26x16
@@_No_Hilfiger hell yeah do it 💪🏼