What's inside a Taser weapon
Вставка
- Опубліковано 28 вер 2024
- I was surprised to see how this actually works! I've always been curious as to how these worked. I bought a pallet of items at an auction and this was on it, so I figured this would be a good way to find out.
all you have to tell me is that there are two very sharp needles going into me and i'm down on the floor!
😂😂😂😂💥👍
where is the confetti?
+the4armedmonk I was wondering the same thing. Maybe inside the air cartridge?
the4armedmonk it isn't confetti ik it's a joke but I thought it was behind the prongs and I think it's only on the u.s. police models I might be wrong
all models have the confetti... it's so that if a criminal uses it to rob a store there'll be evidence of the discharge. each piece of confetti has the taser's serial number on it.
The blast door colours are based on the range of the cartridge.
@@emptyangel then where's the confetti in this one?....
Most likely in the compressed air cartridge he didn't open
oh geez did you take a look at those barbs
damn they are like fishing hooks with no easy retrieval lol. ouch!
Because eBay has stupid rules when it comes to selling weapons of any kind.
That metal cylinder is pressurized CO2. The big silver wedge tube thing punctures through the front and lets the gas through it, shooting out the barbs.Lucky you didn't blow a finger off cutting through it.
No it's NOT. It's nitrogen.
@@TicTac-g7m Yeah, NO2. Much more force per unit volume. It's why a lot of car tire shops inflate with pure nitrogen rather than regular air.
God damn it
How would one go about removing the barbs from a person?
Pull
Hold down the skin around the barb and very quickly and forceully pull at a 90 degree angle trying to minimize the amount of time you pull on the skin.
you get in your car quickly and close the door between you and the person you zapped. and then you drive away in a rapid but cautious fashion. the gsv might drag across the ground for a foot or two< but if the vic weigh's more than 90 Lb's, the barbs should have no problem just pulling out of the soft flesh,
I'd imagine if you were trying to cause the least amount of damage to the flesh, you would try to put perpendicular pressure on the barb, away from hook at the end, so it clears the wound track and then gently pull it out so it doesn't catch. Or, you could do looks what most cops do and just rip it out YOLO-style.
could you please make a video explaining how to fix a Chinese taser.
I love how you just hacked it apart knowing full well there was a mysterious propellant load inside
Yes. There is nitrogen gas that propells these probes. The thing with the barbs on them is called probes.
So the battery within the gun "taps" the canister and the compression within the canister propels the needle/barbs. So you didn't show how the electrocution charge is inflicted on the criminal. In other words the taser battery has to connect and stay connected to the bars somehow. After all it is from the Taser's battery that the "juice" is delivered to the criminal.
They always said that they were little disks in there with a serial number that would come flying out to the police could identify whoever used the taser. Did you not see any of those?
You've got some balls to be taking apart a cartridge.
Great tear down. I was curious what was inside one of those things. Thanks for uploading.
I want to see you put it back together.
I don't think that perforated brass disc is a filter. It's more likely a gas flow restrictor to prevent over-pressurization of the cartridge and having it just blow up in your hand the moment the puncturing pin breaches the gas cylinder seal. They probably wanted a relatively controlled, sustained release of the propellant and that was a cheap method of doing so. You can think of it like the flow restrictors in a lot of shower heads these days. The water pressure in many houses are high enough to be somewhat dangerous, so flow restrictors can bring that pressure down to a reasonable level.
Wow you are really just pulling stuff outta nowhere huh. It’s a liquid nitrogen or CO2 cartridge meaning the pressure is dependent on ambient temperature and elevation. deltaT and deltaP. Just like in an airgun. Also a flow restrictor is literally just small gas port hole in most cases, the filter he was referring to was the black fabric and the perforated disc is the support for the filter so it doesn’t get damaged and works reliably when exposed to high pressure discharge. I’m not a taser expert but it seems like there most likely wouldn’t be a need for a flow restrictor since they design both the gas canister and the cartridge, so they most likely fill the canister with enough gas plus a little extra to prolong shelf life, and then they’d just put a little extra strength in the taser gun itself so that it doesn’t explode. Many BB guns are made of plastic that use CO2 cartridges and they don’t explode…
If they can dose the amount of propellant to be just enough for a single shot when punctured then there’s no reason why the frame can’t be made of plastic with steel reinforcement when the gas port is just like those cheap CO2 BB guns do. Except the BB guns need a flow regulator because the entire cartridge isn’t meant to be dumped all at once like the taser is.
Man, I thought you were going to touch on what I was wanting to understand!
Ok, so that angled sharp pin obviously punctures the nitrogen canister. BUT HOW DOES IT DO THIS? How does it travel TOWARDS the canister, to puncture it?
I heard that at the front of the plastic box, where the gate doors are, that little pin u see is a little primer that is activated by the same electrical "lightning" that travels through the wires, darts, and into the target person. Supposedly there will be an arc that travels between the tips of the two darts, and THAT ARC will hit or short or Im not sure if Im using the right word, but the PRIMER gets "shocked", ACTIVATED, and the energy shoots the sharp angled puncture thingie rearward and that in turn releases the nitrogen propellant for the darts to fly forward!
CAN YOU PLEASE LOOK INTO THIS AND LET ME KNOW WHAT YOU THINK?
Best video by far, discussing how these things work!
Thankyou
@British Airways Boeing 747-436 my brother no disrespect but you totally didnt answer my questions. What moves the sharp needle into the cannister to puncture and release the nitrogen propellant? Is it moved electrically or physically by a spring or hammer?
This is exactly what I want to know! Did you find anything out?
My Pulse cartridge is constructed very similar to this one. My understanding after dissecting mine is that the small primer embedded in the cartridge explodes with sufficient force to drive that small spike into the gas cylinder where the expanding gas (nitrogen?) quickly floods the two barrels that house the barbs and foam rubber gas seals as well as a couple other channels that blow the plastic doors off the cartridge and spray that ID confetti everywhere.
Taser cartridges have different ranges by the colors of the blast doors and the stickers on the back of the cartridge yellow blast doors are 15 foot gray blast doors are 21 foot and green blast doors are 25 foot
my pulse fell to the ground off a work bench, since then I can not get it to work, I charged the old battery with a make shift charger, but the pulse remains unresponsive, I have a feeling that if's I get a replacement battery? it wont do me anygood. but i really do wish I could find someone to repair it.
Thank You For The Info, This Was Made 2012, Any One else know of other comparative vids to learn from. Narator in newer info videos please list brand model of unit, approx. price, & for a tazer, how much for replacement cartridges, Please bcz with a stun gun cartridge only firing 1 round, its a good idea for back up cartridges in a pocket. & People, any where else shown Which tazers are better/cheaper/durable List them also? People helping people to learn to feel safer, ...This ALL informationalises... too many vids here are 1 sided advertisiments & when a person calls a company the company doesn't even call them back.
I have a BKL95 cellphone stungun but wires have come loose and am not sure which one goes where can you help or put me in right direction?
The compressed gas is nitrogen.
why wont ebay let you sell the stun gun/flashlight
That would be some easy fishing.
***** Water conducts electricity... But yeah.
fish'll get shocked when they see it
Anyone know if it’s possible to buy the law enforcement cartridges for these? I bought some before from Guerrilladefense.com but that’s the only place I can find
wish it was on video but my buddy shot himself in the leg trying to take one these apart no major damage just alot of laughs
How? Unless he somehow ruptured the gas canister another way, he'd have to somehow set off the primer cap at the base for it to deploy the barbs.
X
Marker tags?
show
how do you refill the cartridge?
You can't. It's a one time use so you'd have to purchase a new one.
RubbinRobbin The cartridge is disposable, so you just take it out and load a new one.
All the internal components are so minute and fiddly that I doubt even if you could 3D print your own that it would be much of a cost savings. You'd have to source your own NO2 micro gas cylinder, Litz wire, conductive barbs, various rubber gas seals, pressure regulator plate, etc. Still, it might be an interesting endeavor to power the cartridge with something like a .38 blank rather than NO2 to get more penetration power through thicker clothing.
whats in the barbs?
elecrons
nothing, the metal cylinder behind it is for weight to have enough intertia to go into you. but the barb is just a fishing hook that transmits the electricity into you
pancho villa just solid steel to help them penetrate deeper. thats what she said.
Stainless steel barb and a regular steel weight. I'm sure Axon carefully choose the specifications for those weights, the length of the barbs, and the force of the gas cylinder after much testing. For instance, I'm sure they could have gone with a more powerful propellant, but that might risk over-penetration of the barbs, causing them to be instantly lethal. Plus, I heard they originally went that route, but had to redesign it because otherwise it would have to be classed as a firearm and they wanted to stay as far away from that public perception as possible.
Very helpful i am a electrical genius well HAAHAH i am getting there but i am going to make my own because youtube is my friend good job