I know it's supposedly cedar, but I was thinking about going the extra mile and dousing everything in a UV protectant / sealant just for a little more peace of mind on longevity and protection from the weather elements. Thoughts?
Looks good. You will need to install a hook and chain reinforcement on the beeswax roof vent because the wind will rip it off. I also did the same on the door
Thank you for this video. We bought this unit and are just getting started. Concerning the rebar you used to anchor the structure, what did you do to put a “top” on the rebar?
I don’t have a way to heat and bend rebar to form loop. So I cut off short piece of rebar and welded to top to form a L-shape and pounded in ground. Hope this helps! Thanks Scott
@@frankmajors1703 I took a piece of 3/16 plate and welded a tube to it. Screwed that to bottom plate on greenhouse and drove a piece of rebar with tab welded on it down through tube. Thanks Scott
Looks like ours are somewhere in between. I think what happened is the top on each side needs either pushed in or pulled out to get it close. Don’t know if that helps. Thanks Scott
Awesome jump by Lucy at 20:15!
What a Beautiful property!
We're about to put ours together, thanks for how to instructions!
Thank you so much. It has taken a lot to get where we are but have enjoyed it so much. Hope the video helped…you will do great!
Good job. Thanks for the video.
Look 👀 good Scott , cedar got a long life for sure . 😊
hello
hopefully last for many years!
Awesome, I love it
Thank you!
I know it's supposedly cedar, but I was thinking about going the extra mile and dousing everything in a UV protectant / sealant just for a little more peace of mind on longevity and protection from the weather elements. Thoughts?
It’s really nice things even can use for entrance doors also
Looks good. You will need to install a hook and chain reinforcement on the beeswax roof vent because the wind will rip it off. I also did the same on the door
Thanks for the tip!
Thanks for video
Where did you buy the screen for the roof vent? Thank you.
@@yvonnemilton
Hello,
Screen was included with the kit.
Thanks
Scott
What do u mean about a tab on rebar? I have alot of wind
Did your instructions call for caulking all of the panels inside and out?
I didn’t show in video, but they said only outside.
Thank you for this video. We bought this unit and are just getting started. Concerning the rebar you used to anchor the structure, what did you do to put a “top” on the rebar?
I don’t have a way to heat and bend rebar to form loop. So I cut off short piece of rebar and welded to top to form a L-shape and pounded in ground. Hope this helps!
Thanks
Scott
What kind of bracket is that you used to put the rebar in hold hold the greenhouse down on each side? Thank you.
@@frankmajors1703
I took a piece of 3/16 plate and welded a tube to it. Screwed that to bottom plate on greenhouse and drove a piece of rebar with tab welded on it down through tube.
Thanks Scott
Just started building mine and it calls out the rafter ends to 1 1/2 inch overhang per plans. But I keep getting 1 3/4. What did you get on yours?
Hello,
I will have to check. Seems like I had some trouble with that also.
I will get back with you.
Thanks
Scott
Looks like ours are somewhere in between. I think what happened is the top on each side needs either pushed in or pulled out to get it close.
Don’t know if that helps.
Thanks
Scott
I know it has not been too long but I am curious how the greenhouse is working out?
Hello,
We love it so far and have had no issues. Looked like Costco possibly marked them down in price recently too!
I just bought one of these for my wife. Can one person assemble this thing?
@@greencrunchy6640
Hello
Yea one can do it. Might take a little longer but it’s do able.
Good luck I’m sure it will turn out great!
Scott
How long does it take to assemble?
Hello
I would say around 4-5hrs. We split it up over a few days because of weather.
What was the cost to buy the green house kit?
Kit was around $1300 when we bought it. They had them on sale a few weeks ago for around 1k.
Thanks