Yes the 571BL paddle will work with your holster. If you're interested in purchasing one, please visit our website (copquest.com) and type part # 23-2446 into the search bar or click the following link: www.copquest.com/safariland-571bl-injection-molded-small-paddle_23-2446.htm
Hello, I'm not seeing any fits for the Glock 48 on the 7371. I do see a fit for the 48, but not the 48 MOS, on the 7378. Also, yes you can attach a UBL to these holsters if you desire. Here is the link to the 7378 if you want to check it out: www.copquest.com/safariland-7ts-7378-als-concealment-paddle-holster_23-1220.htm
Question: I do executive protection and I carry concealed . I want to wear a holster that sits a little lower on the waist which is my natural draw. Which adapter to I get to help lower the holster a little lower on the waist?
Great question! In the drop down menu you'll see a DM option. That will get you a 1" drop off the waist: www.copquest.com/safariland-567bl-belt-loop-adjustable-angle-fit_23-2485.htm
Good question! According to the Werkz website, it is compatible with the Safariland 565bl www.copquest.com/safariland-565bl-hi-ride-belt-loop-adapter_23-2480.htm
Yes it is. If you're interested in purchasing a 745BL with a QLS 22 receiver plate already attached, check out our website copquest.com (copquest.com/safariland-745bl-clip-on-belt-loop-with-ms22-receiver_23-2690.htm)
@@copquest the instructions that came with my 7378 tell you to put the spacer "on the outside of the belt slide." I will change it to the way you have it if that's how it comes from factory. Thanks
@@vinprecipuo8043in the video is the correct way. The instructions say “make sure to use the support piece on the outside of the slide on the top two T-nuts. Slotted end of support piece to be on the same side of the adjustable 3 hole side of the belt side”. That is the belt side and the outside.
Yes the 565BL comes with a T-spacer. The spacer plus longer screws that are included in the packaging allow for the holster to sit further away from the body. Conversely, if someone wants their holster "high-and-tight" to their body, the spacer would not be used.
I have the 578, and I really HATE the paddle! I was wondering if the 571 paddle is compatible? Thanks Mr. Holster Guru
Yes the 571BL paddle will work with your holster. If you're interested in purchasing one, please visit our website (copquest.com) and type part # 23-2446 into the search bar or click the following link: www.copquest.com/safariland-571bl-injection-molded-small-paddle_23-2446.htm
I was just looking at the 7371 7TS for a Glock 48 and am wondering if a UBL could be attached and also if it would be compatible with the 48 MOS
Hello, I'm not seeing any fits for the Glock 48 on the 7371. I do see a fit for the 48, but not the 48 MOS, on the 7378. Also, yes you can attach a UBL to these holsters if you desire. Here is the link to the 7378 if you want to check it out: www.copquest.com/safariland-7ts-7378-als-concealment-paddle-holster_23-1220.htm
Great stuff! I use a Velcro nylon shoulder harness off duty! Side ways to.
Are you able to use the 565BL belt loop on the 7378 ALS holster?
Great question! Yes, those are compatible.
Funny my expensive safariland holster only had the non adjustable low ride in it.
Great video, thanks for explaining.
Appreciate the nice comment!
Between the gen 2 paddle and the 567bl what do you think holds tighter to body for concealment in suit or over shirt? Thank you!
Great question! Everything is personal preference and hard to say exactly, but between the two the paddle will probably hold it closer to the body.
Question: I do executive protection and I carry concealed . I want to wear a holster that sits a little lower on the waist which is my natural draw. Which adapter to I get to help lower the holster a little lower on the waist?
Great question! In the drop down menu you'll see a DM option. That will get you a 1" drop off the waist: www.copquest.com/safariland-567bl-belt-loop-adjustable-angle-fit_23-2485.htm
Thank you for this video.
You're welcome Jaime. Thank you for watching!
I just purchased a Werkz m7owb holster for my walther pdp. Will the Safariland 565bl work on it?
Good question! According to the Werkz website, it is compatible with the Safariland 565bl
www.copquest.com/safariland-565bl-hi-ride-belt-loop-adapter_23-2480.htm
Hey man, is the 745BL comparable with the QLS?
Yes it is. If you're interested in purchasing a 745BL with a QLS 22 receiver plate already attached, check out our website copquest.com (copquest.com/safariland-745bl-clip-on-belt-loop-with-ms22-receiver_23-2690.htm)
The spacer on the 567BL is on the wrong side. It should be on the outside of the belt slide attachment
Vin, thank you for the comment. The 567BL as shown in our video is how all holsters mounted with a 567BL come from the Safariland factory.
@@copquest the instructions that came with my 7378 tell you to put the spacer "on the outside of the belt slide." I will change it to the way you have it if that's how it comes from factory. Thanks
@@vinprecipuo8043 You're welcome.
@@vinprecipuo8043in the video is the correct way. The instructions say “make sure to use the support piece on the outside of the slide on the top two T-nuts. Slotted end of support piece to be on the same side of the adjustable 3 hole side of the belt side”. That is the belt side and the outside.
does all these work with the QLS?
Yes, all Safariland UBLs both duty and concealment will work with QLS.
Is there a spacer on the 565BL? I just bought it and it came with a spacer but the instructions are only for paddle or 567
Yes the 565BL comes with a T-spacer. The spacer plus longer screws that are included in the packaging allow for the holster to sit further away from the body. Conversely, if someone wants their holster "high-and-tight" to their body, the spacer would not be used.