Vinyl transfer onto a 24" deco bubble

Поділитися
Вставка
  • Опубліковано 3 лис 2024

КОМЕНТАРІ • 109

  • @mixinmagic5995
    @mixinmagic5995 8 років тому +2

    Thanks for the very prompt response. I'm into balloon twisting as well as balloon stuffing. I just think the vinyl idea would enhance any project. Cheers! Mick

    • @majoriejoseph8825
      @majoriejoseph8825 5 років тому

      Hello chris. What machine did you used to make the vinyl letters

  • @smarsh599
    @smarsh599 5 років тому +1

    Hi Chris. I was at your London session. I haven't actually made up the cardboard jig but I like the idea of using 2 x 260s to make a 'belt' around the balloon. I have tried it and it really helps getting things straight especially on a foil star or heart. Good tip Chris; ripper! Steve

    • @Balloonpro
      @Balloonpro  5 років тому

      Hey Steve! Thanks for the message. So glad it has helped :)

    • @smarsh599
      @smarsh599 5 років тому

      @@Balloonpro Certainly has. I sometimes use 260s to fix the balloons to a chair back but last night in bed I thought I could use the idea with a table top easel. 👍

  • @heavenscentballoonsandflow1834
    @heavenscentballoonsandflow1834 8 років тому +2

    Another great technique tip which gives me the confidence to try it too!
    Thank you for sharing and for inspiration.
    Annette - Norfolk England

    • @Balloonpro
      @Balloonpro  8 років тому

      Hi Annette! Thanks for your lovely comments. Best of luck!
      Chris

  • @tiffanyw8394
    @tiffanyw8394 5 років тому +1

    That moment when he took out the homemade balloon holder with measurements - haha love it!

  • @michelleschwarz
    @michelleschwarz 3 роки тому +1

    Omg Chris, this is brilliant! 🤩

  • @dananaz12
    @dananaz12 3 роки тому

    Wow you make it look so easy . Lol 😂 so many people say it’s hard and I guess I’m intimidated by it . I have an event in the 27 th of June 😱😱😱I told this lady I e never done this lol 😂 thanks for the video

  • @tamewah
    @tamewah 8 років тому +2

    So smart and innovative!! Thanks for the videos!!

    • @Balloonpro
      @Balloonpro  8 років тому

      Thanks for the feedback!

  • @nitalata4688
    @nitalata4688 4 роки тому +2

    Wow me encantó. Yo que me hacía líos tratando d e pegar sola el vinil 👌🏻

  • @CandyGlamEventsDesigns
    @CandyGlamEventsDesigns 4 роки тому +3

    Great video ,
    I wonder if you experienced the vinyl wrinkling after a few hours ? I made several vinyl Ballons recently and it seems that the writing wrinkles like it’s coming off and I can’t find the cause for it any advice ?

    • @Balloonpro
      @Balloonpro  4 роки тому +2

      Hi! The vinyl will wrinkle if the balloon decreases in size OR the vinyl doesn't stick correctly. We always pre inflate our bubbles first and leave for a few hours to make sure it has no leaks. You will also notice that if the temperature fluctuates this will increase or decrease the size of the balloon & subsequently the vinyl will stretch or wrinkle.

  • @kavoadakunimata20
    @kavoadakunimata20 3 роки тому +1

    Thank you for sharing. Could you please tell me what type/brand vinyl and transfer tape you're using? And where can I purchase it from? On your website?

    • @Balloonpro
      @Balloonpro  3 роки тому +1

      Hi Kavoa, thanks for watching! Unfortunately we don't sell any of these products, we just focus on balloons. The brand we use is called the 'Avery 500' series in Australia from a place called 'Graphic Art Mart'

    • @kavoadakunimata20
      @kavoadakunimata20 3 роки тому +1

      @@Balloonpro thanks and I'm in Australia. I was searching on UA-cam for an Australian that does this sort of tutorials so I could ask lol

    • @Balloonpro
      @Balloonpro  3 роки тому

      @@kavoadakunimata20 Ohh perfect! Did you manage to find them? www.gamart.com.au/

  • @mixinmagic5995
    @mixinmagic5995 8 років тому

    What a brilliant idea using the vinyl! Could you go into more detail about creating the vinyl please. I've recently heard about vinyl cutting machines but have never used one. Thanks for posting.

    • @Balloonpro
      @Balloonpro  8 років тому +1

      Hi there! Thanks for the feedback.
      I haven't created anything about printing vinyl as it is machine specific, I'm sure you will be able to find lots of videos online detailing the cutting process. Let me know if you cant!
      Chris.

  • @nursedaniel72
    @nursedaniel72 2 роки тому

    YES I WILL MARRY YOU.
    I love the way you handle balloons..😘

  • @suzettekework824
    @suzettekework824 4 роки тому +1

    Hello, excellent video, I have a question, how long does the vinyl last in the balloon with helium without taking off, because I have seen on many occasions that the vinyl is taking off, this happens because?

    • @Balloonpro
      @Balloonpro  4 роки тому

      Hi Suzette, thanks for your feedback!
      The answer to your question is that it varies. For a quality balloon such as a Qualatex deco bubble, the helium will escape slowly. If you use soft but sticky vinyl (note, you can get many different types), the vinyl will stretch onto the balloon and hold for up to 5 days. If the temperature drops on day 2, the balloon will shrink and the vinyl will crinkle or even fold off... So many variables.
      What is important is that you make it clear to your customer that you cannot guarantee 'x', based on your practice and experience guarantee them the minimum days it will be good for and the expectations have been set.

  • @MariaCarmona10
    @MariaCarmona10 6 років тому +1

    Hi Chris !!! This is such a great idea, one of the biggest issues that I have is transferring the vinyl to the bubbles .... and this “box” it’s perfect to keep the control of the balloon !!! I thinking that my problem also it’s because I haven’t find the correct transfer paper I’m using the cricut oficial transfer paper and it’s really bad .... can you recommend a good one !!! I’m suffering with this :’( by the way your business is amazing and you are such a great I nspiration thank you very much !!!!

    • @Balloonpro
      @Balloonpro  6 років тому

      Hi Maria! Lovely to meet you
      I'm so glad this has helped :)
      RE transfer tape. We use clear medium tac transfer tape. It is sold as a roll. You must make sure you use medium or low tac tape.
      Good luck!

  • @ivelissealbino4264
    @ivelissealbino4264 3 роки тому

    Love it! Thanks for the info

  • @haminpark5779
    @haminpark5779 5 років тому +1

    Thanks. It’s really useful information.What size latex balloon did you put in deco bubble? 24”??

    • @Balloonpro
      @Balloonpro  5 років тому

      Hey Hamin! For this we used a BSA brand 17" round

  • @Bella-jv1oe
    @Bella-jv1oe 4 роки тому +1

    I've tried so many vinyls on the bubble balloon. But the vinyl will alwaysss bubbling after 10 hours. The bubble balloon is not shrinking. I don't understand. What vinyl is the best to put on the deco bubble balloons. For now I'm using the silhouette vinyl. But which vinyl is better??

    • @Balloonpro
      @Balloonpro  3 роки тому

      Hi Bella, sorry for the late reply. We use Avery 500 series vinyl. All I can suggest is: A) Your balloon is going down, but you said this isn't the case, b) The vinyl isn't sticking or c) The print you are cutting is too big OR doesn't have enough gaps around the print to help you apply it.

  • @Livinglife826
    @Livinglife826 7 років тому +3

    Great video, where do you purchase your medium contact paper?

    • @Balloonpro
      @Balloonpro  5 років тому

      In Australia from a place called 'Graphic Art Mart'

  • @MaryElizabeth-hw7sg
    @MaryElizabeth-hw7sg 3 роки тому +1

    Hi 👋
    Are this 24” balloons can stay 48hrs floating?

    • @chrisadamo7
      @chrisadamo7 3 роки тому

      They most certainly can! If you use the Qualatex deco bubbles they can last much much longer

  • @speakrighttogod
    @speakrighttogod 5 років тому

    I'm confused!!! Perhaps it's because some balloon techniques are new to me. You used a 24" deco with a 17" latex inside (the size you replied to one of the viewer's question to this video). Did you overinflate the red 17" latex by 7 inches, but it didn't pop????? Thanks for your reply!

  • @rositamejia4373
    @rositamejia4373 4 роки тому

    Excelente idea muchas gracias, eres lo máximo. Por favor como se llama ese papel o también he visto que lo hacen con plástico, pero no se con que nombre comprarlo. Gracias y bendiciones. Saludos desde Ecuador

  • @ivanr8960
    @ivanr8960 6 років тому

    hi excellent video, txs. question: im having issues with vinyl air bubbles shortly after it has been applied. Any suggestions? is the vinyl supposed to stick without bubbles for long time? please help

  • @blerta4349
    @blerta4349 7 років тому +2

    Hi Chris! Thanks for sharing your knowledge, tips and tricks with everyone! :)
    I live in Boston, USA and I'm just getting started with a small :) balloon "business". Before selling to the client I'm trying to test everything myself...and my biggest disappointment and WORRY has been with the deco bubbles. - I inflate them with helium and in 20 mins or so they start wrinkling (deflating) :( :( :( i tried tying them up with fishing line, twine etc but nothing works :(
    How do people keep them inflated for days (even weeks)???
    Your help would be soooo much appreciated :)
    Thank you!
    B.

    • @Balloonpro
      @Balloonpro  7 років тому +1

      Hi Blerta!
      I am actually thinking of our next video to be on bubble balloons. They are tricky. We use a small cut of a 160q or 260q balloon. The stretch in the latex compresses around the valve of the bubble and closes it off air tight.
      Give that a go!

    • @blerta4349
      @blerta4349 7 років тому +1

      Thank you Chris!! You're a lifesaver!! I'll try that!
      If I lived in Sydney I'd definitely apply for a job with you guys :D

    • @Balloonpro
      @Balloonpro  7 років тому

      :)

  • @helengoses2171
    @helengoses2171 6 років тому

    Hi!Is there a way that I can stop the vinyl bubbling over a few hours of being on the balloon? There is no shrinking of the bubble just the vinyl bubbles up! Any way to stop that from happening? Thanks!

  • @stelatrujillofootguimaraes9147
    @stelatrujillofootguimaraes9147 7 років тому +1

    I personalized a bubble ballon and some time later the vinyl began to wrinkle. Is it because of the type of vinyl or is it because the balloon did not seal properly? thanks

    • @EssyAkanni
      @EssyAkanni 4 роки тому

      stela trujillo foot guimaraes I would like to know the answer to this too

  • @cookiescorner5651
    @cookiescorner5651 7 років тому +1

    Hi Chris: I put glitter paper and pre- cut confetti in my Deco Bubble. I have tried to cut my own circles using a 1/2 inch hole puncher. It will cut the paper but it will not cut the tissue paper and it will not cut the mylar sheets. Is there a tool I can buy that will cut it? Also what can I put in the deco 24' BALLOON that will make the paper stick to the sides. or will the paper even stick at all.
    Thanks Chris

    • @Balloonpro
      @Balloonpro  6 років тому

      Hey! Sorry for the late reply. I think I missed this.
      Unfortunately I only have experience cutting and transferring vinyl. I haven't tried anything else.
      Good luck!

  • @meetatailor3560
    @meetatailor3560 3 роки тому

    Hi there - can you please provide the measurements of the jig you made? Is it 24cm x 2 on each side?

  • @hajeraanwaruddin5640
    @hajeraanwaruddin5640 4 роки тому

    What paper should I use for the printing ? Vinyl paper ? And what printer should it be ? Inkjet will be good ?

    • @Balloonpro
      @Balloonpro  4 роки тому

      Hi! We just cut vinyl. We don't print. So I can't answer that question

  • @JakiJade
    @JakiJade 7 років тому

    I completely enjoyed your tutorial. I am a newbie and is very excited to try this. tell do need a special printer/machine to print the vinyl?

    • @Balloonpro
      @Balloonpro  7 років тому

      Hi Jacqueline. Glad you enjoyed! Thanks for letting me know.
      RE a vinyl cutting machine. Absolutely. We use a Zing KNK but there are plenty on the market that are quite affordable.

  • @billlee2244
    @billlee2244 8 років тому +1

    Hi, just want to ask a question. I used a 24" deco bubble to make a balloon in balloon. I used 5 unit 5 inch Qualatex balloons as inside balloon and inflated air. After filled all small balloons into deco bubble, I inflated helium for the deco bubble. However, around 10 hours later, the 5 inch balloons became larger and larger. Finally, the all small 5 inch balloon burst. Any recommendation to keep the small size balloon :) ? Thanks

    • @Balloonpro
      @Balloonpro  8 років тому +3

      Hi Bill
      A common mistake. Make sure you inflate your 5" balloons with helium. If you have air inflated 5" in a helium environment (the bubble), the helium from the bubble will want to equalize the pressure around the air in the latex, expand it and then pop. Helium in your 5" will fix this.
      Cheers,
      Chris

    • @billlee2244
      @billlee2244 8 років тому

      Thanks for your lovely comment. Let me try next time :)

    • @billlee2244
      @billlee2244 8 років тому +1

      Hi Chris,
      Just got one more problem about the deco bubble balloon. As we place the wording sticker on the deco bubble, the bubble coverage remain a lot of finger print. Are there any tips to fix these finger print ?
      Thanks for your help again :)
      Cheers,
      Bill

    • @Balloonpro
      @Balloonpro  8 років тому +1

      Hi Bill
      Sorry I'm not 100% sure what the best method would be to fix that... Perhaps use cotton gloves? We don't seem to get fingerprints on deco bubbles here.
      Good luck!
      Chris

    • @sylviaamado6777
      @sylviaamado6777 7 років тому

      Is that why they advise not to mix air inflated with helium inflated in a single balloon? I love your videos...

  • @HeyAleph
    @HeyAleph 8 років тому

    Hi! What size are you using for the red balloon? I love this!

  • @smithliz14
    @smithliz14 5 років тому

    I know this was a while ago but was wondering if I did a vinyl svg of a portrait and applied to a mylar would it float?

  • @balloonboutiquetammy7530
    @balloonboutiquetammy7530 6 років тому +1

    I have done this twice today and both burst :( Followed your tutorial exactly. Any ideas. It’s the inside balloon that burst

    • @Balloonpro
      @Balloonpro  6 років тому

      Ohh no! What size balloon are you using inside?

  • @Blakethegreat-jh8wt
    @Blakethegreat-jh8wt 6 років тому +1

    Is there a way to stop the vinyl from crumbling up the next day on the balloon?

    • @Balloonpro
      @Balloonpro  6 років тому

      It will always slowly deflate. My advice is to inflate the balloon 24 hours in advance and apply vinyl, that way you will at least detect any faults. Also make sure the temperature is consistent overnight.

  • @kellymayes52
    @kellymayes52 6 років тому

    Hi, What size wording would you suggest for a 36" balloon please

  • @cookiescorner5651
    @cookiescorner5651 4 роки тому +2

    Where do you get your transfer paper and vinyl from

    • @Balloonpro
      @Balloonpro  4 роки тому

      Hi! We get it from 'Graphic Art Mart' in Australia.

  • @yuliya121212
    @yuliya121212 7 років тому

    Good morning! what size of red balloon you used? thank you)

  • @claritaqc1
    @claritaqc1 7 років тому

    Hi Chris Im from Colombia I Can't found the cover for the balloon. Can you please told me the name. Thank you

  • @vickyharseno1837
    @vickyharseno1837 7 років тому

    hai chris.. can you tell me what the name of sticker you put into your baloon.. thank my bro

  • @hannahobrien1163
    @hannahobrien1163 4 роки тому

    what measurements did you mark the box with please?

  • @lrowdy456
    @lrowdy456 3 роки тому

    What low tack transfer tape do you use? X

  • @reanamasih3519
    @reanamasih3519 7 років тому +1

    Hi, thanks for your video. What type of vinyl did you use on this ballloon? We've tried Cricut vinyl and it's seems to bubble off after a couple of days.

  • @UrAvgRasian
    @UrAvgRasian 8 років тому

    My question is do you need some fancy knot to tie the balloon off or traditional simple tie?

    • @Balloonpro
      @Balloonpro  8 років тому +1

      Hi there. If using a 17" BSA round inside the bubble, you can simply tie a basic knot on the 17" balloon BUT then there will be some exposed latex so that latex will deflate faster than the outside bubble skin. I would twist the neck of the bubble multiple times over the tied 17" balloon and then wrap that with an offcut of 260Q or 5" neck to seal everything as one.

    • @UrAvgRasian
      @UrAvgRasian 8 років тому +1

      Balloons Online Okay great!

  • @kasturimages4338
    @kasturimages4338 6 років тому +1

    Hi did you print the wording in normal photo paper or any special paper ?

    • @Balloonpro
      @Balloonpro  6 років тому +1

      Hi. This is all cut in Vinyl. Not paper

  • @danielaisabelbuelvasangulo7100
    @danielaisabelbuelvasangulo7100 7 років тому

    Hello
    Where can I get and what is the name of the bag or lining where you put the balloon, please. Thank you.

    • @Balloonpro
      @Balloonpro  7 років тому

      Hi Daniela. I think you may be talking about the outside bubble balloon? They can be sourced from a company called 'Qualatex Balloons', it is called a 24" Deco Bubble balloon.
      Good luck!

  • @kentkragh1901
    @kentkragh1901 7 років тому

    Do you put Hi-Float in the latex balloon? Plus can you put Hi-Float in Deco?

    • @kassukappe7419
      @kassukappe7419 7 років тому

      It say in the package "Don't use Hi-Float on Bubble or latex balloons inside the bubble."

  • @lindsey5062
    @lindsey5062 6 років тому

    Hi Chris, could you get away with using a 16" qualatex in a 24" deco.
    Thank you.

    • @Balloonpro
      @Balloonpro  6 років тому

      Hi Lindsey. You sure can, I just find that the bubble is forced a little oval shaped (not a clean circle).

  • @asiwajuomoyorunba1cfr956
    @asiwajuomoyorunba1cfr956 4 роки тому +1

    Please, how can I get the paper, please?

  • @mariacardenas4555
    @mariacardenas4555 5 років тому

    Hello please could you show us how to paint inside a bubble balloon

  • @stelatrujillofootguimaraes9147
    @stelatrujillofootguimaraes9147 7 років тому +1

    hello do you use any vinyl type specific to bubbles?

    • @Balloonpro
      @Balloonpro  5 років тому

      Hi Stella. We use avery 500 series vinyl. Its a cheaper, less permanent.. more malleable vinyl.

  • @eternity0855
    @eternity0855 7 років тому +1

    do you have a template for the holder of the deco balloon, excel or word sheet?
    thanks

    • @Balloonpro
      @Balloonpro  7 років тому

      Hi Diljit. I don't i'm afraid... I just measured it by hand.
      Sorry

  • @betsaidacamano2508
    @betsaidacamano2508 5 років тому

    Hermoso me encanto la técnica. Make it look easy. Like i can :). Thanks.

  • @hebamalek9924
    @hebamalek9924 6 років тому

    What printer u r using to make the name as a sticker

  • @SophiaKhanDaniel
    @SophiaKhanDaniel 4 роки тому

    Genius!

  • @tnguy103
    @tnguy103 4 роки тому

    where can I get the helium tank?

  • @melatedecoraciones4570
    @melatedecoraciones4570 7 років тому

    hola buenos dias chico me puede informar como es el proceso y que tipo de papel utiliza para para poder estampar el globo

    • @Balloonpro
      @Balloonpro  7 років тому

      Hi Catalina. We use a brand of vinyl called 'Avery 500'

  • @customuk2133
    @customuk2133 6 років тому

    We have tried this - but the weight of the vinyl letters just prevents the balloon floating when helium is used to float the balloon. If you can get the balloons to float, they don't float for very long. The only way to get these balloons to work is to produce a stencil with a Cricut explorer machine (or similar cutting machine) and ink on the words onto the balloon. Have a look at www.getpersonalised.net for more information.

    • @Balloonpro
      @Balloonpro  5 років тому

      Hey. I disagree, just make sure you don't use too much vinyl and also are using pure helium.

  • @cookiescorner5651
    @cookiescorner5651 7 років тому +2

    I will pay you to make me one AWESOME

    • @Balloonpro
      @Balloonpro  7 років тому +1

      :)

    • @Balloonpro
      @Balloonpro  7 років тому

      Hahahha. A few suppliers in Australia have them for sale now :)

  • @isabelcristinabravo6864
    @isabelcristinabravo6864 4 роки тому

    😍

  • @muhammadnabeel3847
    @muhammadnabeel3847 3 роки тому

    Hi, what sort of printer we can use to create personalized balloons

    • @Balloonpro
      @Balloonpro  3 роки тому

      Hi Muhammad. This is a vinyl cutter, the one we use is a KNK Zing

  • @krizzykris852
    @krizzykris852 5 років тому

    Hi! How can I ship this?

  • @MultiFresd
    @MultiFresd 7 років тому

    Showwww

  • @CandyGlamEventsDesigns
    @CandyGlamEventsDesigns 4 роки тому

    Great video ,
    I wonder if you experienced the vinyl wrinkling after a few hours ? I made several vinyl clear bubble balloons recently and it seems that the writing wrinkles like it’s coming off and I can’t find the cause for it any advice ?