Mini RC FPV Tank 3D Printed Free STL Files
Вставка
- Опубліковано 17 лют 2021
- Hi... In this video you will find how to assemble this 3D printed mini FPV tank. I've made the STL files available on Thingiverse for you to download for free if you choose to do so leave me a comment saying you done so it will be much appreciated. Thank you for watching... www.thingiverse.com/thing:476...
If you enjoy my content and would like to support me by donating, here's a link to my buy me a coffee page any donations will be much appreciated... www.buymeacoffee.com/CoolStuf...
These are affiliated links. It helps the channel if you buy the parts using the links below...
Thank you..
Parts...
Servo - www.banggood.com/custlink/vmv...
FPV Camera - www.banggood.com/custlink/DD3...
Receiver I used -
FrSky - www.aliexpress.com/item/32858...
FlSky - www.aliexpress.com/item/32918...
1S Lipo Battery - www.banggood.com/custlink/3Km...
Servo Plug - uk.banggood.com/custlink/vGDE...
PH2.0 Plug - www.banggood.com/custlink/vmm...
M2 Screws - www.ebay.co.uk/itm/M1-6-M2-M2...
Other items I use in the video...
Soldering Iron I use - www.banggood.com/custlink/KKm...
Servo Tester - uk.banggood.com/custlink/mDmy...
Transmitter I use Taranis Q X7 - uk.banggood.com/custlink/DKvy...
TPU Filament - www.banggood.com/custlink/mGG...
PLA Filament + - uk.banggood.com/custlink/GmDh...
3D Printer I use Ender-3 Pro - www.banggood.com/custlink/33K...
Creality 3D LD-002H UV Resin 3D Printer - www.banggood.com/custlink/vKD...
That tank is adorable! Great idea using flex for the tracks and modded servos to keep cost down!
Next on makers muse, full scale RC tank.... Lol
This is pretty cool. But i was wondering how i got here before i saw this comment.. now i know why. UA-cam dragged me here behind you.
Thank you 🙏
If you look up tiny trak theres quite a few people doing this, you can also use lego tracks for more grip
I have a 3d printer at home and i make this tank copy and i add some c4 inside than i give em a ai now he wants to blow me
Nice! What I love is the simplicity of the design and minimal parts. Personally I would have chosen Lego tracks and wheels to further simplify the construction, ( they are only $14), but this is the designer's choice and I respect the idea of 3D printing as much as possible. Nice job.
Thank you
Hi... Love to know what you guys think... Is it Cool 👍 or Not Cool 👎.
Also leave me a comment if you have any ideas or suggestions... Thanks
You need to call Peter Shripol up and ask him for some real small rc igniters and make it shoot fireworks at you neighbors.
Do you sell this... i want it..
@@keeianfazilkee8552 it’s free files read title
@@keeianfazilkee8552 Sorry mate no I don't
@@CoolStuff1 make me one... sure perfect for my assignment...😃
Awesome build! Just like mine but fully 3d printed, it looks like the tracks work really well, I like the use of servos too they look they have good torque and control, subbed!
Thank you mate
Hey bro would you mind sending me the g code file I would really appreciate it
Started building a mini fpv tank. Wish i’d seen this first. Somany great tips here. Excellent build.
Thanks... I'm working on a one more mini rc tank at the moment.
Very nice build! Super clean!
Thanks!
Me encanta es sencillo y económico. En tan poco tiempo das varias ideas muy buenas. Felicidades
Nice tiny track build.
Wow using the Servos as a Mini motor + bidirectional motordrive is a smart hack, definitly will use that in the future. Cool build man!
Thank you
This is absolutely awesome and made me laugh so heartily. Thank you for the inspiration! I'll be on it as soon as I can afford my own 3D printer =')
Thank you mate
Super cool, thank you for sharing this. 👍👍
You're welcome thanks
That’s pretty cool
Great well though out design, simple but effective.
Thank you mate
Wow, perfect! Thank you!
Thanks 😊
Cool stuff...!!!
I wish I had a 3D printer , this is so much fun
man I just got an ender 3 for like 200 bucks
Is it just me or the video editing is spot on? Really loved it, the zoom shots, the transformations , everything. Nice, Congrats! you won this subscriber
Thank you mate 🙏
I agree. the video editing is top notch.
Music popping too 😂
Simple and awesome
Thank you
This is the coolest thing I've ever seen.
Thank you
Of course it is
Fun project i think i want to do something like this, looks fun.
Super Idee!
This is very good. And your video is pretty user friendly too :)
Thank you
Cool stuff :)
Very cool actually
The tank is really cool! And I noticed the music you got here has an awsome bass! I just connected the bluetooth speaker to my phone to try it, it’s soo good!!
Hi mate thanks. Some people on here didn't really liked my choice of music but it seems you and I are on the same page 😀
@@CoolStuff1 Hi! Don’t mind them! You did good!😎
your a genius man that is really awesome
Thank you mate
😍 awww is so cute and funny o3
supper awesome now i want 1 for my self
This is so awesome! 😄
Glad you think so!
Awesome! Was looking for something like this.
New sub.
Thank you
Love the tank its sooo cuteee!!
Thank you...
I want one. Nice!
That's super cool
Thank you
Amazing!
Thanks!
boy, thats on its way to be the next anki
So Nice !!! 👏🏻👏🏻👏🏻
Thanks
Cool as ****
😊 Tanks mate
Daaaamn man!! This is so damn cool bruh
Thank you mate
Awesome!!
Thanks!
Awesomesauce
So cool...I have printed it out.. ordered arduino nano and WiFi module so I can control it with my phone...
Might have to use normal 5.8ghz fpv cam alongside as I cannot programme cameras yet..
Nice made! +1 Like ;-)
Thank you
I love this project. I will try this at home
Thank you
Here from makers muse
Keep it up 👍👍 awesome build
Thanks will do
@@CoolStuff1 thank you for replying
Класный малыш получился! Спасибо большое. Два таких танка и можно в прятки, войну играть
soooo cool thanks
You're welcome
cool! Subbed
Awesome, thank you!
It reminded me of the Micro Machines game. A friend with another one like that and you can already race.
awesome
Thanks
nice parkour
Cooles video
Thank you
Boss:Dave do you have the tps reports?
Dave: Beter
Hi ! Just to inform you that I made one with the elements I had and with a Nodemcu in the back (Cause I can do what I want with the servos speed and add other stuff) ; I pilot it via wifi on my tablet. your model is very nice, thank you. Just a bit tight if we don't have the same hardware : mine has the nodemcu board above the battery and with a bunch of wires on top lol ! So, if you want to improve it, make it a bit bigger on top, a bigger hole for the antenna and even the lens, and with a plateform on the back if we want to put more stuff somewhere.
That's great! Thanks...
Man, center the camera in the chassis, make the tracks large enough to work wether it's upright or upsidedown, get the battery inside the chassis and boom 💥... Search and rescue robot small enough to get through piles of rubble after earthquakes.
Cheap and easy to be used in swarms.
cutest tank in the world :)
Thanks
Cool you add a link in the description to those cute mini lipo batteries? Thanks. Nice video!
yes looking for that too. also want to know the runtime. can not be much more than a few minutes I guess since the video tx will be thirsty for power.
Cute af
Thanks
That's awesome! what's the run time like and any issue with VTX heat?
From fpv side you still had room for a small osd for battery unless your radio rx has telemetry. I could totally see me trying to use this for checking the crawlspace and not thinking about the battery.
omg i need one))
The way the camera sticks out reminds me of a sturmtiger
super !!!!!!!
Thank you
cool
Thank you
5:35 "let there be electricity..." : and there this little kid got excited.
🔥😍👍
little guy is treading around lookin for da beans
Do you have any tutorial regarding the code required for this project?
Very nice job!
I just finished printing a miniature milk crate. Silly, weird, odd, cool. Will be printing tons of other silly things I suppose to get good enough, to print robotics and various other parts. No matter the reason, upon grabbing a burger and examining my creation, this vid popped up. Reminds me of the saying "It's a jeep thing you wouldn't understand", lol. It's a printing / electronics / maker thing, you wouldn't understand... Nice, I'm on this. So dig the mods to the servos, the whole thing. This definitly qualifies as Cool Stuff. Just saw your comment below, HAHA! YES IT IS COOL! Well your comment is above now and? Just saw Angus weighing in? Dude, if the Muse approves what more can you say?
Cool design, good description how to modify the servo.
Thank you
Some wide rubber bands would give it a little extra grip
Hey cool Tank, Good idea, but how do you control the Motors?
The tank is awesome. Would like to buy it :)
Thank you
I can sell it to you :)
Great little project!! How do you make the servo motors respond to the steering as well as the throttle from the radio?
They are on seperate channels, or he uses the left stick for the left track and the right stick for the right or he uses a mixerfunction in the transmitter but do not think this transmitter has any. Maybe the receiver has some mix function in it but not sure those exist. and an other alternative option could be using a vtail mixer micro circuitboard. just plug them in between the servo's and receiver and voila. now can also control it with a pistol grip transmitter.
How you can make servos move with a 3.7v battery? I'm trying with an esp8266-01, and the servos don't work. Seeing min max, values, servos at least need min 4volt supply???
6:20! 6:20! cool as hell.
mobula7 camera I like it
lovly
Thanks
Thank you for sharing this great project. One clarification request...can you describe what adjustment you are doing at 1:50? Trimming the motor to find the zero motion point...then supergluing the trim adjustment knob? Your video is REALLY good...but could use some text explanations at critical points...connections at the 5:00 mark for instance. Anyway...thank you for sharing your knowledge!
Thank you for your feedback. Yes at 1:50 I find the centerpoint where there is zero motion then I superglue it so it doesn't move when i'm puting to together. Yeah I know I should have put some text explanation...
Good work. If I wish to pipe the fpv cam to computer how can I do it ? Thanks
What keeps the fpv camera from overheating?
They get so damn hot when still, even when not encased in plastic :)
25x7mm brushless 5v fan
This is eerily similar to my video on a Mini RC FPV tank that I made...
Not even close.
Wouah !!!!
Thats the smallest FPV-Tank thumb up.
Thank you
Is there updated links for parts? Looking to build one but don’t know how to find some parts you used
👍👍👍😄
Bro that is amazing I want to buy one
Hi mate... If you got access to a 3D printer the STL files are free to download on Thingiverse and all the parts are listed with links for purchase in the description box...
can u tell me the receiver u use. the to the item already expired
Can you please modify the STL so that we digital FPV people can fit a CADDX VISTA with nebula Nano or pro? Please that would be awesome
No need to modify servos for this just get a couple Far Sky 360 servos. They are basicly the same cheap miro servos you are using just setup for 360 right out of the box
200k views and only 6.4k likes, such a nasty viewers..
Great tank, thank you.
Thanks mate
Is the steering linear? I mean can you Control the Speed of both motors or just on/off ?
Is there a way/hack to make it linear?
It is linear...
That vtx must have been very hot.
Yes it does get pretty hot indeed
caterpillar is too rigid; give it more flexibiity, it will improve traction and suspension over irregular terrain
You are absolute right. I re-designed them and work much better. more flexible and more grippy since I gave them well spaced ridges of a few mm high instead of blocks with narrow openings in between. works much better and it runs smoother because the servo's do not feel as much resistance now
Are the tracks compatible with lego tracks ?
why does my servo motor not have the green thing inside?
How long will it drive for on one charge?
What's the range like?
Sir can you tell screw size and width which you used to attach servo and tyer
M2 18mm long
is there any way to use CRSF nano from the receiver.?
Yes if you get an sbus to ppm converter
I was waiting for you overdrive the Moblite 85 but you havn't :€