Good morning, Thank you for your videos. I have two questions please : 1- what is the point of adding the VILDONA 0.2 mm in addition to the L/B 0,4 mm "SALAMADER" ? 2- where to find the tool to remove the thickness of the leather before gluing it ? Merci de Paris
www.etsy.com/listing/244393721/18mmdiameter-hole-snap-rivet-and-brass If you can't get the snap, you can use regular spring snaps (ex: double cap ring snaps).
Bonjour, Thank you for your videos. I have two questions please : 1- what is the point of adding the VILDONA 0.2 mm in addition to the L/B 0,4 mm "SALAMADER" ? 2- where to find the tool to remove the thickness of the leather before gluing it ? Merci de Paris
1. Basic reinforcement (non-woven fabric, VXP, Vildola etc…) Prevents deformation of leather. Common reinforcement (L/B, Webtax, Bontax, Sponge ect… ) Literally reinforces the product (hard or soft) 2. What tool are you talking about? Please tell me the exact timeline.
Thank you for your explanations. The first tool is for scraping leather, timeline 5:22 The second tool is for scratch tracing 5mm and 6mm brass timeline 4:22 Who is your supplier please ? Cordialement @@navicoleather
![[덱추천] 기능으로 점령전 꿀팁상담! (꼭 풀감해야할 영상) | 심양홍's 서머너즈워](http://i.ytimg.com/vi/Fs6CCZ-Gg6w/mqdefault.jpg)
Your channel is amazing! I'm new here and I'll back again! Congrats for your job!
Thank you for those kind words. Have a happy day always!
보고 배워갑니다
도움이 되면 저희에게도 기쁨입니다. 행복한 가죽 수공예 하세요~!!!
Thank you!
You're welcome, hope it is some help. have a nice day!!!
카드홀더. 잘 만들어보겠습니다
영상, 무료패턴까지 늘 감사합니다~^^
좋은 말씀 감사합니다. 행복한 가죽 수공예 하세요~~^^
Nice work liking the closure stud!
Thank you have a nice day~!!!
Very nice. Thank you!
You're welcome, hope it is some help.
영상 감사합니다
저도 감사합니다. 행복한 가죽 수공예 하세요~!!!
👏👏👏👏
thank you, have a nice day~!!!
작아도 섬세한 손길이 필요한 지갑이네요~
패턴 감사합니다 ^^
도움이 되셨으면 좋겠네요, 행복한 하루 하루 되세요~!!!
👏👏👏👍🙏🙋♂️
😀😀😀😀😀😀😍😍😍
Good morning,
Thank you for your videos.
I have two questions please :
1- what is the point of adding the VILDONA 0.2 mm in addition to the L/B 0,4 mm "SALAMADER" ?
2- where to find the tool to remove the thickness of the leather before gluing it ?
Merci de Paris
아이코~
영상을 보다 깜놀했어요
오른손에 상처가 깊어 보여요
어쩌다가 고수분 손이 😫
빨리 상처가 낫길 바랩니다
오늘도 좋은 영상 감사합니다
^^;;; 사고가 나서 다친게 아니고~
아들이랑 장난치다가 아들 손톱에 심하게 긁혀서 ㅜㅜ;;;;
이제 거의 다 나았어요~
걱정해 주셔서 감사합니다.
행복한 가죽 수공예 하세요~!!!
@@navicoleather
좋은아빠네요 ㅎㅎ
아들과 장난치다 다치셨다니
왠지 행복한 상처 같아보여
훈훈하네요🤭🤭
Nice design and video. What kind of snap did you use on this?
www.etsy.com/listing/244393721/18mmdiameter-hole-snap-rivet-and-brass
If you can't get the snap, you can use regular spring snaps (ex: double cap ring snaps).
Lindo trabalho! Que cola é esta que você usa? Obrigada pelo molde 😘
intercom ecostick 1816B (water based adhesive)
Tenha um bom dia
Bonjour,
Thank you for your videos.
I have two questions please :
1- what is the point of adding the VILDONA 0.2 mm in addition to the L/B 0,4 mm "SALAMADER" ?
2- where to find the tool to remove the thickness of the leather before gluing it ?
Merci de Paris
1.
Basic reinforcement (non-woven fabric, VXP, Vildola etc…)
Prevents deformation of leather.
Common reinforcement (L/B, Webtax, Bontax, Sponge ect… )
Literally reinforces the product (hard or soft)
2.
What tool are you talking about?
Please tell me the exact timeline.
Thank you for your explanations.
The first tool is for scraping leather, timeline 5:22
The second tool is for scratch tracing 5mm and 6mm brass timeline 4:22
Who is your supplier please ?
Cordialement @@navicoleather