How to fix Samsung A10 | A20 | A30 | A50 showing a red/orange triangle while charging?

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 69

  • @tylerthegamerofficial
    @tylerthegamerofficial Рік тому +14

    This happened to my A20 couple of minutes ago, I didn't take it apart but I slapped the battery part on the back; and it turned on. The reason it showed the error was due to overheating; and I think it was because my phone was in a case/cover

    • @harmonyhues123
      @harmonyhues123 8 місяців тому +3

      Ohhh thankyou Soo much, your comment helped more than the video

    • @Kimikashimoo
      @Kimikashimoo 5 місяців тому +2

      LMAOOO THIS WORKED

    • @Imrankhan-workshop
      @Imrankhan-workshop 5 місяців тому +2

      Thanks dude your trick worked 😂😂😂

    • @cognitonito2695
      @cognitonito2695 2 місяці тому

      slapping worked lol, thanks, i slapped it while charger is connected. it even fixed the speaker and headphone jack which was no longer working after it fell the other day 😄

    • @FeryIls
      @FeryIls  2 місяці тому

      @cognitonito2695 😂, Thats definitely just the conector lose.so even by pressing from outside sometimes works as well. just don't to hard 😉😉

  • @AfroPlayersProfile
    @AfroPlayersProfile 3 місяці тому +1

    wow u r a life saver, keep in touch

  • @primainstitute2482
    @primainstitute2482 4 місяці тому +1

    Very helpful! Thanks a lot.

  • @joemama-rb2qn
    @joemama-rb2qn Рік тому +2

    if I use knife do I still need to seal / finish with soldering?

  • @tanielanaisua1219
    @tanielanaisua1219 2 роки тому +1

    So bro you just simply remove the thermal sensor?...not replacing right?

    • @FeryIls
      @FeryIls  2 роки тому

      Yes, remove it with next resistor.

  • @joemama-rb2qn
    @joemama-rb2qn Рік тому

    really enjoyed ur music what who is it?

  • @22BlineOfficial
    @22BlineOfficial 3 місяці тому

    Really worked

  • @jodybillings3841
    @jodybillings3841 Рік тому +2

    I'm confused as to why removing a sensor on a cheap charge port board makes more sense the simply replacing the board. The board is pretty cheap and if you replace the board you still have a working sensor. Considering not many people have the soldering tools handy compared to a screw driver, heat gun and a charge port worth under $20 online, this seems like more work with lesser results. This is kind of like a car with a dash warning light that's on and your solution is to disconnect the warning light. The board is potentially still overheating but now you just don't have any warning.

    • @FeryIls
      @FeryIls  Рік тому +6

      Then its gonna happen again 😉. No doubt if replace new one better but this is for those in hurry and not have spare part.

  • @sanjitmahato-wg8mc
    @sanjitmahato-wg8mc 5 місяців тому

    ❤❤❤

  • @JayAnimationsB3D
    @JayAnimationsB3D 2 роки тому +2

    i replaced the charging board with my A51 its still giving organe triangle so the sensor has to be somewhere in the motherboard how do i fix it

    • @FeryIls
      @FeryIls  2 роки тому

      Yellow triangle with Water Drop indicator?

    • @JayAnimationsB3D
      @JayAnimationsB3D 2 роки тому

      @@FeryIls no only yellow traingle the temp sensor is broken and thinks it its frozen temperture

  • @hades_288
    @hades_288 5 місяців тому +1

    If I would like to change the board instead then how much will it cost ?

    • @FeryIls
      @FeryIls  5 місяців тому +1

      change always better . this is just trick . depending on your local repair shop we are in different location .

  • @hassanrahimi8022
    @hassanrahimi8022 3 роки тому +1

    👏👍🙏

  • @joliekoutang9579
    @joliekoutang9579 2 роки тому +1

    Would you know where this sensor is on a note 8?

    • @FeryIls
      @FeryIls  2 роки тому

      Note 8, what error shows? High temperature or low temperature error?

    • @mgomez5606
      @mgomez5606 2 роки тому

      @@FeryIls my s20 plus shows the same as this phone.

    • @Mgk323
      @Mgk323 7 місяців тому

      @@mgomez5606 same

  • @lutendonemavhola6786
    @lutendonemavhola6786 14 днів тому

    i did what the top comment suggested and slapped it and it wokred. But now volume keys dont work, and once the screen turns off, its off for good and i have to restart it

  • @clarissajrojas
    @clarissajrojas 2 роки тому

    Dose this work for a236u samsung? Can't figure out where the sensor is

  • @lindakekahuna2236
    @lindakekahuna2236 2 роки тому +1

    What kind of tool are you using to unscrew the screws from the device?

    • @FeryIls
      @FeryIls  2 роки тому

      Its variety of tools. You can check ifixit website.

  • @ayotypic-tn
    @ayotypic-tn 2 роки тому

    Thank you. Everything back to normal after doing this. Is it necessary to replace the board in the near future?

  • @jetragdedelcarmen5747
    @jetragdedelcarmen5747 Рік тому

    My noe 20 ultra shows the same problem. the high-temperature symbol keeps showing when I am attempting to charge it.

  • @SapnaThakur-sk8xi
    @SapnaThakur-sk8xi 6 місяців тому

    Bhai pasee kitne Lage ge

  • @patilcreaction223
    @patilcreaction223 Рік тому +1

    What this repairing cost

  • @todesto
    @todesto 11 місяців тому

    how do you find that sensor on a10e port board?

    • @FeryIls
      @FeryIls  11 місяців тому

      its located beside headphone . i cant attached photo so just search it on net az A10e charger error thermal .

    • @gicugigel3790
      @gicugigel3790 7 місяців тому

      ​@@FeryIlswhere is thermal sensor on A04s? Thank you

    • @FeryIls
      @FeryIls  7 місяців тому

      it's shows Yellow or Orange rectangle ?

    • @gicugigel3790
      @gicugigel3790 7 місяців тому

      @@FeryIls you have any idea? Phone shows Orange triangle with thermometer and a charging wire with a line on it, on bottom of screen. If i try to turn on the phone, the screen flashes for 1 second and doesnt start. If i disconnect the charging board, the phone starts.

    • @FeryIls
      @FeryIls  7 місяців тому

      this is not thermal issue. the line what we call it Pair its not connect properly well or either have broken lines from Thermal capacitor . the Sensor located on top of the Charging port once you open the cover of the charging board you will see 3 snall components on center where they have glue on top of it. you need check che middle component is Theramal Capacitor . see if its lose solder it if not replace it. by the way easiest way is to replace charging board if you dont have knowledge of soldering smds. good luck .

  • @renzo_me
    @renzo_me Рік тому

    How about samsung a30s?

  • @timhanckel1527
    @timhanckel1527 2 роки тому +1

    It didnt fix the issue for me. Same error symbols come up but now my phone has 2 quick vibrations about once a second

    • @FeryIls
      @FeryIls  2 роки тому

      Remove each connector 1 by 1 and test.

    • @TechNo1geek
      @TechNo1geek 2 роки тому

      same, wdym my each connector?

    • @FeryIls
      @FeryIls  2 роки тому

      ?

    • @JayKingsKid
      @JayKingsKid 2 роки тому

      @@FeryIls he meant what do u mean by each connector

    • @JayKingsKid
      @JayKingsKid 2 роки тому

      So what are the connectors

  • @aqdas253
    @aqdas253 Рік тому

    Do you know the solution for S22 ultra red triangle with no charging symbol?

    • @FeryIls
      @FeryIls  Рік тому +1

      mostly red triangle means the high temperature error . got 2 solutions , 1st is to bypass is same the video and 2nd is to trace it why .. either is battery or charger port board thats faulty. will upload one video for S series very soon .

  • @selenc.3324
    @selenc.3324 2 роки тому +1

    My galaxy A20 phone got a little water from its charge port. The phone doesn't start and when i put it on charge, it gives red thermometer sign. Does removing the sensors fix my problem?

  • @ronaldzankumbi378
    @ronaldzankumbi378 2 роки тому

    Can this be a solution for the Galaxy M51 as well? Red thermometer, in a yellow triangle?

    • @mgomez5606
      @mgomez5606 2 роки тому

      My s20 plus is doing it. Ill just replace the small board.

  • @Imrankhan-workshop
    @Imrankhan-workshop 5 місяців тому

    Mine returned to normal by slapping the battery hard😂

    • @jidzako9117
      @jidzako9117 5 місяців тому

      I already changed my flex cable and charging board but still error so im gonna try the slapping of the battery this time 😂

  • @eddierams9516
    @eddierams9516 Рік тому

    Before it was showing red triangle and now after doing this it shows yellow triangle. Galaxy A20 . Your trick didnt work

    • @FeryIls
      @FeryIls  Рік тому

      A20 you need to jump wire the big Capacitor one on center witch is you removed. just make them connect to each other. will works 100%

    • @dhargz
      @dhargz Рік тому

      I remove the capacitor the problem bacome yellow triangle, i jump the connection of the capacitor it return the same problem.What do you think the solution?

    • @FeryIls
      @FeryIls  Рік тому

      @dhargz from first the problem is Red rectangle ? and what model is that?

  • @TeresitaGo-p1x
    @TeresitaGo-p1x 8 місяців тому

    I'm just a kid can anybody tell me how does it work I mean how it just show pls😢😢

  • @alwajrsatricks.28
    @alwajrsatricks.28 9 місяців тому

    Nnyammago😢😢