Yo where going to have to link up are you in Cali ? I’ve got a aero with the same setup except I’ve modified my mlm pipe what rollers are you running an how menny shims ? Also did you do any porting on you’re cylinder And is that the slick Willy pipe ? For aero or spree since you swapped it
Couple questions I assume this is a af05e being you have a 72cc bbk. Can you give some details on your clutch / roller setup. What contra / clutch springs are you running to get your rpms to climb that quick . I have a 86 aero50 . With 72cc bbk , boyesen dual stage reeds ported intake manifold , s23 slick willy pipe , af16 belt (wider ) , keli variator and 8.5g rollers , stock carb and box with a 92jet . Yours hits way way hard than mine from a dead stop . I'm going to order a carb and pod filter not sure which yet. Plan on ordering carb, contra spring and clutch springs all at once plus a temperature gauge .
@@sunshinemybrain9042 huh? stock is 82. i have read a couple post of people seizing the motor by throwing just a pipe and pod filter and not upjetting enough and thats on the stock 50cc setup . 85 jet in my would 100% lean the motor and over heat it forsure. im thinking 90 jet on the stock carb with air box and pipe would be the lowest main that would be safe. i know my malossi BBK kit came with a #88 jet and thats for stock pipe and carb setup with the bbk. im going to likely order a 17 or 19mm polini CP carb
@@sunshinemybrain9042 key words " Can you give some details on your clutch / roller setup" that's what my question was . had nothing to do with jetting .
I have a af05 aero engine I’m running a oko carb 105/40 for jets rollers one I thing they 7g factory clutch whit yellow springs and jog clutch pad springs got some flappers s23 pipe 72cc big bore kit and the airintake manifold it hit 49 in flat road just order my final gear
Dude! You're crazy! Awesome video!
Thanks much 😂
Where did you get your BBK
Yo where going to have to link up are you in Cali ? I’ve got a aero with the same setup except I’ve modified my mlm pipe what rollers are you running an how menny shims ? Also did you do any porting on you’re cylinder And is that the slick Willy pipe ? For aero or spree since you swapped it
Love Cali not sure size on my rollers I think is 6 and 7 and like 2 shims and polini variator
And yeah everything for aero from @scootersawpshop
I got the af05e elite bbk, cp19 , s23 exhaust naraku intake but can’t get it to idle right and bogs down, what size jet do you have
I have a oko 21mm Jets 35/120
@@FelpaBoysGarage are you still running the oil pump
No
@@FelpaBoysGarage do you recommend taking out the oil pump if I do a 72cc bbk on an Af05?
@@jdmpowgames I just take my pump out because I like to do my own mix but not sure if it’s recommend,is working good for me.
Good shit buddy! You in Connecticut?
Thanks yes I’m
Ct gang whadddupppp
Just bought a 86 special edition let’s go ripping
@@eliteproductions835 I’m down
Couple questions I assume this is a af05e being you have a 72cc bbk. Can you give some details on your clutch / roller setup. What contra / clutch springs are you running to get your rpms to climb that quick . I have a 86 aero50 . With 72cc bbk , boyesen dual stage reeds ported intake manifold , s23 slick willy pipe , af16 belt (wider ) , keli variator and 8.5g rollers , stock carb and box with a 92jet . Yours hits way way hard than mine from a dead stop . I'm going to order a carb and pod filter not sure which yet. Plan on ordering carb, contra spring and clutch springs all at once plus a temperature gauge .
try an 80 to 85 jet
@@sunshinemybrain9042 huh? stock is 82. i have read a couple post of people seizing the motor by throwing just a pipe and pod filter and not upjetting enough and thats on the stock 50cc setup . 85 jet in my would 100% lean the motor and over heat it forsure. im thinking 90 jet on the stock carb with air box and pipe would be the lowest main that would be safe. i know my malossi BBK kit came with a #88 jet and thats for stock pipe and carb setup with the bbk. im going to likely order a 17 or 19mm polini CP carb
@@nathanw5747 why you asking questions then if you know all the answers. get a temp gauge on your scooter if you’re so worried about temp
@@sunshinemybrain9042 key words " Can you give some details on your clutch / roller setup" that's what my question was . had nothing to do with jetting .
I have a af05 aero engine I’m running a oko carb 105/40 for jets rollers one I thing they 7g factory clutch whit yellow springs and jog clutch pad springs got some flappers s23 pipe 72cc big bore kit and the airintake manifold it hit 49 in flat road just order my final gear
Man! This thing looks like it would be a BLAST to ride! How much money you got in this scoot rn??
Not sure brother, I want to say like $1,300 and yeah she fun to ride..🤙🏾
@@FelpaBoysGarage that’s not bad at all!! Most people have a ton in builds lol
How hard is it to swap a AF16 into a spree??
Not sure brother but can’t be that hard,you got this.
Witch exhaust are you running?
S23 got it from @scooterswapshop
Top speed
Guy breaks every law on the street and then uploads a video for all to see doing it...