@@TKFElectronics Unfortunately not that easy. Did that and it's "glued" stuck with a two sided adhesive gasket. I tried heating up the edges with a heat gun, but no luck. If I didn't care about damage, I could just pry it out with a screwdriver, like another UA-camr did with an SRX-828SP, leaving unsightly screwdriver marks in the wood. Not an option for a perfectionist like me. . Another post just mentioned using a rubber mallet to remove the module and left the rest of procedure to imagination... I figured it out! I removed the grill and the woofer (which was 10 times easier than I thought! The woofer is not glued at all). After this, I tried to push out the amp module with a footlong piece of 4x6 stud and a hammer. No luck! I did not give up. Set my heat gun to 800F and blasted in a rectangular movement all the edges of the amp module for maybe 5 minutes. Then half a dozen *really* hard hammer whacks, and voila! It's finally out cleanly with no damage to the cabinet or the module...
As power ON cooling Fan will rotate slow speed & get Off immediately & then when inside Heatsink temperature increases Fan will start rotating & as the inside temperature increases Fan speed also increases. More heat more speed to cool down the unit.
you are a rockstar !!!!! i just saw the price for a new unit....727 plus tax..... thank you for helping the music to keep pum,ping !~!!!!!
Dear friends, I need the software for this motherboard, can you help me?
Anybody know where I’d be able to find a diagram of this pcb board
How do you remove this amplifier module from the cabinet? Do you have to remove the woofer first and push out the module?
Just by removing 10 screws which is fixed to Amplifier Module & pull out Module & detached woofer wire only.
@@TKFElectronics Unfortunately not that easy. Did that and it's "glued" stuck with a two sided adhesive gasket. I tried heating up the edges with a heat gun, but no luck. If I didn't care about damage, I could just pry it out with a screwdriver, like another UA-camr did with an SRX-828SP, leaving unsightly screwdriver marks in the wood. Not an option for a perfectionist like me. . Another post just mentioned using a rubber mallet to remove the module and left the rest of procedure to imagination... I figured it out! I removed the grill and the woofer (which was 10 times easier than I thought! The woofer is not glued at all). After this, I tried to push out the amp module with a footlong piece of 4x6 stud and a hammer. No luck! I did not give up. Set my heat gun to 800F and blasted in a rectangular movement all the edges of the amp module for maybe 5 minutes. Then half a dozen *really* hard hammer whacks, and voila! It's finally out cleanly with no damage to the cabinet or the module...
What size MOV does that speaker take??
What was the value (details) of the component you replaced in the power module?
Mine turn on then goes to protection mode please help
When starting, does the fan start then stop? I didn't hear it start. Thank you!
As power ON cooling Fan will rotate slow speed & get Off immediately & then when inside Heatsink temperature increases Fan will start rotating & as the inside temperature increases Fan speed also increases. More heat more speed to cool down the unit.
Bro como sacaste la caja?
Please write comments in English inorder to help
do you have the circuit diagrams? with measurement parameters?
Sorry bro No I don't have.
What is the name of the part that you replaced???
MOV
@@TKFElectronicsmy srx 828sp did the same thing?? What size of MOV does it take??
Mine turns on then goes in protection mode....please help..
I recommend you to visit your nearest service center, looks major problem or contact me +91 9653123582
My Mainboard SRX error like that where can I contact you
My contact no. +91 9653123582