This video is old enough to be in elementary school but I still wanted to say thanks for posting it. I have CNC/G-code experience but never ran a conversational control, before picking up a similar MX2 machine. You saved me a lot of time and button pushing. Thanks!
Very informative and easy to understand... for those with no knowledge, of using any such machines and systems, would like to see more if you could find the time. As previously commented... there is not enough on these older systems.... Thank you
The biggest thing to know with arc is knowing where the center is and the end point which is really easy to figure out if you know the radius. Instead of a line you just insert an arc and witch direction you want it to go. Its kinda self explainitory if you know the center and end point.
Very helpful! I know this is an old video but are you still going to upload more of these on the Prototrak? There really isn't much out there. Thanks, Jason
interesting. Now I see why they want us to know about absolute paths. That must get very complicated facing a thick block and then cutting it like a cube or whatever. We have one of these in our maker space, so I wanted to see what it was about.
How do you mill arcs and curves, when you have unknown tangent points??....that's why I like accurites, milpower......it has a calculator, to find all your unknown points
I know this is an old video, and an old comment. This ProtoTRAK control is from the late 90's, it is the A.G.E. 2 axis control. A.G.E stands for Auto Geometry Engine and will automatically calculate unknown tangency points as you program if the control is given enough information. There is also a full geometry calculator on board if you just want to find the numbers. Newer ProtoTRAK controls still utilize this Auto Geometry Engine as well as include the ability to import geometry directly from a CAD drawing or Parasolid model. Look up TRAK Machine Tools on UA-cam(ua-cam.com/users/TRAKMachineTools), tons of videos on there.
Around 11:10 and on the repeats are active. It isn’t setup for a continuous repeat, because it’s only taking the two passes. When I added the repeat, it is so I only need to push GO two times to start once I load the next part. If you want it to repeat the same lines over and over, you would need to make your last line of the program (before your SUB line) say YES to continue instead of NO.
This video is old enough to be in elementary school but I still wanted to say thanks for posting it. I have CNC/G-code experience but never ran a conversational control, before picking up a similar MX2 machine. You saved me a lot of time and button pushing. Thanks!
Very informative and easy to understand... for those with no knowledge, of using any such machines and systems, would like to see more if you could find the time. As previously commented... there is not enough on these older systems.... Thank you
I hope you do more i sure could use your help.
Nice video. You can also lie about the tool size to take the bar to size.
Helpful vid. There isn’t a ton of information on these systems online. You should do a vid on programming an arc on this software.
The biggest thing to know with arc is knowing where the center is and the end point which is really easy to figure out if you know the radius. Instead of a line you just insert an arc and witch direction you want it to go. Its kinda self explainitory if you know the center and end point.
Thanks for ur instruction.......just purchased a older Bridgeport with CNC.
Very helpful! I know this is an old video but are you still going to upload more of these on the Prototrak? There really isn't much out there. Thanks, Jason
jjs4x hey, I have a bunch of random tips and tricks I thought about compiling into a couple videos if the interest is there.
Nerp Tech I’m definitely interested, there isn’t much info out there. I know these are older systems but still very capable! Thanks! Jason
interesting. Now I see why they want us to know about absolute paths. That must get very complicated facing a thick block and then cutting it like a cube or whatever. We have one of these in our maker space, so I wanted to see what it was about.
excelente amigo
easy to understand
How do you mill arcs and curves, when you have unknown tangent points??....that's why I like accurites, milpower......it has a calculator, to find all your unknown points
I know this is an old video, and an old comment. This ProtoTRAK control is from the late 90's, it is the A.G.E. 2 axis control. A.G.E stands for Auto Geometry Engine and will automatically calculate unknown tangency points as you program if the control is given enough information. There is also a full geometry calculator on board if you just want to find the numbers. Newer ProtoTRAK controls still utilize this Auto Geometry Engine as well as include the ability to import geometry directly from a CAD drawing or Parasolid model. Look up TRAK Machine Tools on UA-cam(ua-cam.com/users/TRAKMachineTools), tons of videos on there.
Hallo man it's not visible on the screen especially on the program set up can you send a clear pic or in writing
Does anyone know if this is similar to the EZ track system?
Kinda is the same basic concept just different buttons. Ez trak has more caned cycles which makes it better but ez trak has a *h*t*er controller.
Kinda is the same basic concept just different buttons. Ez trak has more caned cycles which makes it better but ez trak has a *h*t*er controller.
How come the repeats didn’t kick in ?
Around 11:10 and on the repeats are active. It isn’t setup for a continuous repeat, because it’s only taking the two passes.
When I added the repeat, it is so I only need to push GO two times to start once I load the next part.
If you want it to repeat the same lines over and over, you would need to make your last line of the program (before your SUB line) say YES to continue instead of NO.