Thank you for the information. That was good content. Because I will buy the six-pack Pro 6000. I like to see a couple more views or angles of the part that you made
I don’t know about all that LOL. Necessity is the mother of all invention though. Like I said I saw it somewhere else and built it out of stuff I had laying around. If the spring is too much I saw another one that was using elastic/rubber bands. Just a thought. Thanks again for watching.
Very Nice! . One thing I noticed with mine is how much the press tilts when loading tall cases in the lee quick change mount. That leads to lots of small problems imho. The cases seem to wobble a little when using the press. I bolted mine down solid, and it went away. I think the lee quick change bench adaptor thing needs to be about double the thickness of steel. The inline Fab one is about 3 times as thick and seems much better on my other press. I'm ordering one for this press. Nice modification to the feeder. I may build one if problems plague me with mine.
I'm fairly sure NotAnExpert@mshaw290808mi 7 years ago is the earliest mod in that nature out there. It was for the lee pro 1000, but it'd still work on the 6000 the same. I like your adaptation of it better though, because it is a bit stronger and easier to make if you ask me! Thanks for sharing! I plan to make one your way to see how well it works for me!
This looks to be a terrific frustration reliever. Why hasn't Lee come out with this? MY .357 cases fly all over the place. Used the smaller opening and verified with the penny.
This has saved me from tossing this in the corner for sure. I have done a few tweaks on it since the video but due to Life I have not been able to do any videos for a while. As things have settled down at my job and home I will get back to it soon I hope. Thanks for watching, and on a side note I have seen where people have 3D printed this also.
The APP has the same issue, and it looks like this may just be adaptable to work on it. I made a crappy feed gate that works pretty well, but it's just taped on. Now if there was only a mod to fix the priming system. Lee has mine for repair/replacement because the priming system kept self destructing.
@Kevin Addison Lee had me send it in so they can repair or replace it. They sent replacement parts 4 times. The last time included the plate with the top plate with the feeder tracks. I think they went as far as retrofitting back to old parts.
Do you think having a case diameter specific insert in the case feeder would help? I've got the same issues with the case feeding. As I watch mine, it seems that often the angle of the next case in the tube is putting pressure on the bottom case mouth at a weird angle. Just can't tell if it's simply based on the jolt the case sees as it falls and hits the plate, and/or from the next case (and the whole stack) from trying to sit on the fed casings mouth at a weird angle. No 3D printer here either, but it would be interesting to see if the next case being generally vertical would help. Don't mind mods, but a tapered insert would be a lot easier to deal with. Of course with the caveat you'd either have to change the insert depending on case, or have cartridge diameter specific feed tube bases.
I was noticing that it would happen more on longer cases, those that sit higher than the slider. Not sure if a caliber specific feed tube/case feeder would be more trouble than it is worth, that was the reason I went with this setup as I can pretty much leave it in place all the time.
Having problem 220 grain flat bottom bullets dropping on cartridge from mini bullet feed. Wants to fall off when I cycle the press. Maybe need boat tail bullets? Any suggestions
Lee has come out with a slower advance rod that may help. What caliber are you loading. If you are loading straight wall then flair a little more. If loading bottle neck I don’t know if they make a flair for them.
@@aubreyfishingandoutdoors5479 loading 220 grain 300blk out. Probably need boat tail. I can't flare rifle cartridges to my knowledge. Bought 500 rounds of flat bottom, learnd a lesson😐
@@rogervanvarick3499 after a little digging found this Lee die. LEE PRECISION 90798, Universal Neck Expanding Die.25 to .45 Caliber a.co/d/27OCV1c maybe something to look into. Don’t have a bullet feed die for rifle so I haven’t had a need for flair on bottle neck cartridges.
@@aubreyfishingandoutdoors5479 thanks. I also have powder check die so I'm kind of out of space. Probably have to buy boat tail. Always like your advice,thanks. Haven't reloaded for 35 years just getting back into it.
It was just a steel tube that I had in my junk drawer. It looked like the insert of a rubber grommet to be honest but you could use copper tubing as long as it fits over the bolt holding the case feeder. Hope this helps and thanks for watching.
How do you keep the case feeder spring and the primer feeder spring from kinking up and binding. I was having trouble with mine doing that so I tried putting some weed eater line in the springs to stiffen it up and that seemed to help. If anyone has any information I would appreciate it.
One penny height above the case mouth sitting on the slider as per the directions that came with the press. It seemed that I was having the problem more with bottle neck cases but it would happen with the straight wall too just not as often.
@@aubreyfishingandoutdoors5479 One penny above the case mouth after the case has dropped, not while on the slider. The case is on the feed ramp plus one penny. Look at picture C in the instructions. Perhaps I will make a video of correctly setting up case feeder for the 6000 as it appears to be needed.
Lee can't seem to find a way to make a reliable case feeding and primer feeding system. At this point they should make something solid..sell it for more and make people happy. Nobody wants to fix design issues with a brand new press. When I sit down to reload, I want to reload, not clearing jams. The low cost of the press does not justify the frustration.
Hi, here is an updated version for 223 case feeder. It does not need the flapper you made. Let me know what you think? ua-cam.com/users/shortsjPV-eD7OXg0
Find somewhere else to go troll. No clue as to why it is even an issue. If you don’t like the way I dress then just don’t watch. Thanks and have a good day.
Thank you for the information. That was good content. Because I will buy the six-pack Pro 6000. I like to see a couple more views or angles of the part that you made
I will be making three of these tomorrow for my press's , thank you for sharing the knowledge. You are a credit to the shooting community.
I don’t know about all that LOL. Necessity is the mother of all invention though. Like I said I saw it somewhere else and built it out of stuff I had laying around. If the spring is too much I saw another one that was using elastic/rubber bands. Just a thought. Thanks again for watching.
Clever gizmo. It looks like a great candidate for 3-D printing.
I’m sure it would be and believe that there already is a file on thingverse. I just don’t own a 3d printer LOL
There’s lots of 3d printing options that make case feed 100% reliable.
That is pretty slick, you have to be a tinkerer sometimes with Lee. My loadmaster is running perfect after a few mods. Thanks for your info.
Very Nice! . One thing I noticed with mine is how much the press tilts when loading tall cases in the lee quick change mount. That leads to lots of small problems imho. The cases seem to wobble a little when using the press. I bolted mine down solid, and it went away. I think the lee quick change bench adaptor thing needs to be about double the thickness of steel. The inline Fab one is about 3 times as thick and seems much better on my other press. I'm ordering one for this press. Nice modification to the feeder. I may build one if problems plague me with mine.
Great Mod. I love stuff like this. Thanks
Ótima ideia, funciona bem melhor que a peça original, parabéns!
Muito obrigado, mantenha seu pó seco e fique seguro.
I'm fairly sure NotAnExpert@mshaw290808mi 7 years ago is the earliest mod in that nature out there. It was for the lee pro 1000, but it'd still work on the 6000 the same. I like your adaptation of it better though, because it is a bit stronger and easier to make if you ask me! Thanks for sharing! I plan to make one your way to see how well it works for me!
This looks to be a terrific frustration reliever. Why hasn't Lee come out with this? MY .357 cases fly all over the place. Used the smaller opening and verified with the penny.
This has saved me from tossing this in the corner for sure. I have done a few tweaks on it since the video but due to Life I have not been able to do any videos for a while. As things have settled down at my job and home I will get back to it soon I hope. Thanks for watching, and on a side note I have seen where people have 3D printed this also.
Just put that gate on my 6000 lee press. Works like a dream. Thanks
The APP has the same issue, and it looks like this may just be adaptable to work on it. I made a crappy feed gate that works pretty well, but it's just taped on. Now if there was only a mod to fix the priming system. Lee has mine for repair/replacement because the priming system kept self destructing.
@Kevin Addison Lee had me send it in so they can repair or replace it. They sent replacement parts 4 times. The last time included the plate with the top plate with the feeder tracks. I think they went as far as retrofitting back to old parts.
Thanks for the solution.
I’m thinking of replacing my 10yr old LEE Turdmaster, and the Six Pack Pro is an option, or I need to save more for a Dillon.
Fantastic idea! This is genius 👏!
This is a hard watch, hopefully there's more Lee Loading Videos.
Sorry it was a hard watch. Been super busy at my regular job. Hope to get mor content out next time I’m in. Thanks for watching though.
Excellent video
The dog just wanted to help
Do you think having a case diameter specific insert in the case feeder would help?
I've got the same issues with the case feeding. As I watch mine, it seems that often the angle of the next case in the tube is putting pressure on the bottom case mouth at a weird angle.
Just can't tell if it's simply based on the jolt the case sees as it falls and hits the plate, and/or from the next case (and the whole stack) from trying to sit on the fed casings mouth at a weird angle.
No 3D printer here either, but it would be interesting to see if the next case being generally vertical would help. Don't mind mods, but a tapered insert would be a lot easier to deal with. Of course with the caveat you'd either have to change the insert depending on case, or have cartridge diameter specific feed tube bases.
I was noticing that it would happen more on longer cases, those that sit higher than the slider. Not sure if a caliber specific feed tube/case feeder would be more trouble than it is worth, that was the reason I went with this setup as I can pretty much leave it in place all the time.
Dont have this press. But Genius idea.
Good job
Very good idea, thank you
Having problem 220 grain flat bottom bullets dropping on cartridge from mini bullet feed. Wants to fall off when I cycle the press. Maybe need boat tail bullets? Any suggestions
Lee has come out with a slower advance rod that may help. What caliber are you loading. If you are loading straight wall then flair a little more. If loading bottle neck I don’t know if they make a flair for them.
@@aubreyfishingandoutdoors5479 loading 220 grain 300blk out. Probably need boat tail. I can't flare rifle cartridges to my knowledge. Bought 500 rounds of flat bottom, learnd a lesson😐
@@rogervanvarick3499 after a little digging found this Lee die. LEE PRECISION 90798, Universal Neck Expanding Die.25 to .45 Caliber a.co/d/27OCV1c maybe something to look into. Don’t have a bullet feed die for rifle so I haven’t had a need for flair on bottle neck cartridges.
@@aubreyfishingandoutdoors5479 thanks. I also have powder check die so I'm kind of out of space. Probably have to buy boat tail. Always like your advice,thanks. Haven't reloaded for 35 years just getting back into it.
Love this.
Thanks.
What did you use for the sleeve. Sorry if I missed it.
It was just a steel tube that I had in my junk drawer. It looked like the insert of a rubber grommet to be honest but you could use copper tubing as long as it fits over the bolt holding the case feeder. Hope this helps and thanks for watching.
@@aubreyfishingandoutdoors5479 You could use a cartridge case. Just cut the head off like you did for the plate, but don't flatten it.
How do you keep the case feeder spring and the primer feeder spring from kinking up and binding. I was having trouble with mine doing that so I tried putting some weed eater line in the springs to stiffen it up and that seemed to help. If anyone has any information I would appreciate it.
As of yet I haven’t had an issue with them yet. But if I do the weed eater string sounds like a good option.
I didn’t see the video of your initial problem but isn’t your case feeder set up wrong? One penny height above the slider?
One penny height above the case mouth sitting on the slider as per the directions that came with the press. It seemed that I was having the problem more with bottle neck cases but it would happen with the straight wall too just not as often.
@@aubreyfishingandoutdoors5479 One penny above the case mouth after the case has dropped, not while on the slider. The case is on the feed ramp plus one penny. Look at picture C in the instructions. Perhaps I will make a video of correctly setting up case feeder for the 6000 as it appears to be needed.
@@TheRotorhound you are correct I’m sorry I didn’t make that clearer. Yes a penny with after it drops off the slider as per the directions.
@@aubreyfishingandoutdoors5479 Is that what your video shows? Never saw video of the problem, only a solution.
@@TheRotorhound the video is of how I solved the case kicking out and or multiple cases feeding out. Didn’t get any videos of it happening sorry.
Very nice!
Lee can't seem to find a way to make a reliable case feeding and primer feeding system. At this point they should make something solid..sell it for more and make people happy. Nobody wants to fix design issues with a brand new press. When I sit down to reload, I want to reload, not clearing jams. The low cost of the press does not justify the frustration.
Cool
Doggy video bomb...😃
Yea she’s my reloading buddy. LOL
@@aubreyfishingandoutdoors5479 I got one too
new press old problems
super !!!!!
Hi, here is an updated version for 223 case feeder. It does not need the flapper you made. Let me know what you think? ua-cam.com/users/shortsjPV-eD7OXg0
Ditch the ear rings
Find somewhere else to go troll. No clue as to why it is even an issue. If you don’t like the way I dress then just don’t watch. Thanks and have a good day.
Thanks for your video. It's trolls like this that ruin it for everyone else.