Livin where I do is like living in a Wind Tunnel. And besides AIrspeed is Airspeed, Mariah puts down the beat, I teach the plane the steps... It's all good...
I had to really tune the throws and change all the settings..the factory stupid and reccommendations are horrible.....like 50 percent of the throw was used and had to put real mg servos in and move the control rods all way in on ael servo and all down on surfaces....but it made a big difference and it's amazing now....get rid of your elevator stock servo I had mine turn into a machine gun out of nowhere and lock into down pos and lawndart....couldn't get it unlocked until I unplugged it....luckily ca works great ton this plane and I glued the wing mt tabs right back on and she's like new again
Both elev and rudder servos were replaced within the first week. Throws were maxed after maiden, Instead of CA or as an alternative try Beacon Foam Tac... Many of us Foam Flyers swear by it. old_coastie
Stock it is always on, Can be Factory Reset which then allows more control via Forward Programming, I have it set on a 3 way switch, Off. AS3X, SAFE... But mostly I fly in AS3X mode with settings very close to the stock values.
Yep...you are a wind master Mark!
Livin where I do is like living in a Wind Tunnel. And besides AIrspeed is Airspeed, Mariah puts down the beat, I teach the plane the steps... It's all good...
that thing flies amazingly well in the wind. Mass makes the difference after all.
Finally someone who realizes that it is HARD to fly a feather in a cyclone....
The beautiful fly like dances on stage
I honestly believe that flyin these models is like dancing...
Waaaa-hooo. Digging this music. CCR....as good or better than Screaming Joe!
Remember the movie Twilight Zone? The episode where Dan Akroyd is the Ambo driver? John LIthgow is on the stretcher? Yeah it's like that... LOL
I had to really tune the throws and change all the settings..the factory stupid and reccommendations are horrible.....like 50 percent of the throw was used and had to put real mg servos in and move the control rods all way in on ael servo and all down on surfaces....but it made a big difference and it's amazing now....get rid of your elevator stock servo I had mine turn into a machine gun out of nowhere and lock into down pos and lawndart....couldn't get it unlocked until I unplugged it....luckily ca works great ton this plane and I glued the wing mt tabs right back on and she's like new again
Both elev and rudder servos were replaced within the first week. Throws were maxed after maiden, Instead of CA or as an alternative try Beacon Foam Tac... Many of us Foam Flyers swear by it. old_coastie
beacon beacon beacon, IT'S BEACON!
Do you have the AS3X option on when you fly in the wind? or its always on anyway?
Stock it is always on, Can be Factory Reset which then allows more control via Forward Programming, I have it set on a 3 way switch, Off. AS3X, SAFE... But mostly I fly in AS3X mode with settings very close to the stock values.
@@old_coastie Thanks