Custom Challenger Taillights Ver.2
Вставка
- Опубліковано 20 сер 2024
- contact me for commissions: winobot@hotmail.com
This is the second version of led tailights I've made for my 2014 challenger. The tailights themselves contain somewhere around 20ft of 3014 led strip. I made the sequence function with 4 timer relays. I also had to use resistors for the running lights to be at the right brightness and to get rid of the hyper flash cause by the low load. Several 3amp diodes had to be used to control the flow of electricity in order to make the lights function properly.
Material list affiliate links
Paint prep spray amzn.to/3AbVzHM
Clear primer amzn.to/3xoqIWO
Clear coat amzn.to/3yk7VND
Black paint amzn.to/3fuPkqW
Resistors for running light amzn.to/37lpOQk
Wiring tube amzn.to/3xtbfod
Shrink tubing amzn.to/37mClmG
Scuff pad amzn.to/3xq2mMr
diodes amzn.to/3CgKlDN
mixing nozzles amzn.to/3rRSfyJ
3014 leds amzn.to/3xome2q
Clear epoxy adhesive amzn.to/3lD7lH4
soldering clamps amzn.to/3yotNY5
epoxy gun amzn.to/3fvnbQg
Pinstripe tape amzn.to/3CeDdry
High temp wire amzn.to/3AeY5gF
Dremel amzn.to/3CcPlJD
Paint prep gel amzn.to/2Vf2OAd
Music
Rock Angel by Joakim Karud / joakimkarud
Dreams by Joakim Karud / joakimkarud
Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0
creativecommons....
Music promoted by Audio Library • Video
Bro really dropped the hardest taillight setup and dipped
As a car guy and an engineer, I must say man, YOU DID THAT! I love seeing creativity like this! Good job! Well worth the time and effort. Thanks for the video!
bro predicted the new charger tail lights🚨
This is better than the factory 👏👏❤️🔥
This is how they should've came stock
@@WINOBOT Maybe in the coming years
Cleanest challenger taillights I've seen. I would like a set on mine. How much?
Mind blowing MOPAR "OVER THE TOP" Badassery!!! If you were in Florida Id pay you to do that to mine...WOW!!
Holy crap you did it again! These are gorgeous!
I already bought the first type you made, which i love! But i will gladly purchase these if you decide to make them again. Please let me know if you decide to start making this type.
Can you provide a list of the parts you used for this? I love how these turned out and would love to give it a try
Never liked challengers for this particular reason, but dude, this is bad ass! Do this to my charger ASAP!
If I could give you more than one thumbs up I would. Could you upload a tutorial on this? Very creative. Looks like the tail lights of the 08 challenger concept car. Infinite thumbs up. Congratulations on your build.
exactly what I was thinking of doing to my old challenger a few years back!! looks great
Out of this world man, seriously. My respects, keep doing what you enjoy. And keep succeeding.
Amazing work,looks much better than stock
I know this video old but that's dope. I dont got my R/T yet but I want those when I get it in a few months!!
Strait skills man salute
Beautiful work!!! Looks even better than the facelift...
Didn't think that was going to work but it looks great! Wish I could do something like that for my 2018.
That’s impressive man, good job!!
Excellent work!!! Thanks for the video!
Wow these are even better! You gotta get these out to sell!!! I need a pair!
Oh man those are beast
Thanks, alot of hard work went into them.
Most dope creativity dude. Futuristic type stuff looks clean af!!
Excellent job
would totally buy one plz make these theyre so awesome
Wow brother!!! That’s beautiful!!! You..... you....... you got a gift my friend...
They look badass good job bro
Damn, wish I could buy these. Amazing work!
You could buy it Darren.
yea darren
That looks GREAT!!!
Built not bought nice bro
This reminds me a lot of the taillights on the saleen challengers
Next Evo taillights please 🤞🏿
Great job man look super clean goodshit.
Take my money how much! I’ll ship mine so you can do it I’m in love with your invention
Wow awesome I wish you could just make a kit with the relays and the lights so we could install them they ate like the concept car
These are sick. I want these for mine
Had to watch it agin great video thats skills i still would love to have a set if you sale them or charge todo it i still have my challenger but salute good video man looks like it was a good amount of work too.
If you were in Florida 👍
NAH for real you the truth for that I need that for my car
So freaking awesome 😎
Ok, nevermind. These are the ones I want 😭
Nice !
This is how new challenger taillight should look like . 2015+ taillight looks cheap. Charger taillight is nicer
Beautiful
Wow, good job! Looks OEM.
Wow ! Lots of skills
Good job bro
Damn homie that was some of the dopest shit I've seen. You should make custom ones at request and make money
Thanks, thats the plan!
Main its so dope let me know how can i get some
Just ordered this, going to look sick
Max can you send me the link where did you get them
Max where can I find them ?
Or did you email him ?
Thats sic man would you consider doing it for someone if they paid you?
Definitely, I'm going to be selling a limited amount for the first few people that are interested. I'm also going to be doing a giveaway for the ones in the video if I can get to 1k subs but I haven't officially announced that yet.
Let’s see the reverse lights
Forgot to record those but you can spot them when I'm painting. I left a clear spot in the center that I just tinted to keep a sleek look.
Wow man!! That is amazing!!!
That’s amazing bro! Good job!
This is super awesome!
Dope!!!
this shi fire 🔥🔥🔥
It’s amazing bro good job.
Fr fr they look like the concept tail lights
Man thats dope
One of one
U killing so clean
They look amazing how can i order a set ??
I no longer make these, sorry
Could you make a kit like this for the newer gen challengers?
Turn lights are not functioning well. They looks like stop light.
Looks good
Let me get those
It turned out amazing 👌🔥🔥 Will you be selling sets of these? Highly interested if you are
Maybe down the road for the right price
I'd be a buyer for what it's worth
WINOBOT brooo Yes! I have a 2014 Challenger RT as well and I’m telling you 😂I need these bad
I will buy just say the price!
Give me a call/message if you do build one for sell!! It would look great on the back of my truck bed im building. 9039463335
Could you give some more info on how to wire all the components?
Would love to build something similar for my 2008 srt8.
I would like to keep te reflective outer line functional though, since its mandatory here.
I see you painted that part black, was that a purely esthetic choice or do you think the reflective edge wont work after sandblasting en sanding?
Greetings from the Netherlands.
So for the wiring I found it easier to just buy a sequential light kit which is pretty much what I built with the timer relays and diodes in the video. The reflective part can stay and work fine I just painted it for a sleeker looking final product. Although thinking back now I could have just left that part red and just tinted it black and got the same result.
Hi winobot these tail lights look amazing can you custom make mines for a Evo 8? Let me know 🐎
I got you fam
they look amazing! Do you have to take it apart if one of them goes out? Like reconstruct it again? That would be a pain.
I would have to, luckily none have went out yet.
Hey man just checking back in about getting some tail lights made?
Wow😍😎
You got my subscribe by this video. Good work !!
Brahhh i gotta get these on my 14! Clean look. Ever thinking about selling a couple of sets?"
Eventually
good job
How fix newer challenger taillights
@WINOBOT how much would it cost to do this to my taillights? I'm located in Florida. lmk
Take my money !!!
Amazing work. could make yourself some money!
Holy shit thats perfect.
this is maness !
im looking i do this to my Challenger but i cant finde the map to do the circuit. how much for sharing me that info??
Awesome 😎👍
Hey I know it's a lot of work but I would love it if you could make and sell a few of these. I bought the black strip from Luxe that runs along the lights so I can at least try and not hate them but man I would buy a set of these in a heartbeat!!
Please let me know if you decide to build another to sell. 👍
Looks good!...... but what did you do about the reverse light(s)?
They're there, just tinted. You can see in the part where I'm painting that I left them clear.
@@WINOBOT sir really interested ,how much total price if you make for me
I want a set. How much, best taillights I’ve seen
Can you get me a cleaner picture of the wiring diagram? And maybe the led strips you used? Gonna attempt this after watching this video I saw the earlier comment on what resistor timers you used the part in the video is just kinda blurry on the diagram, thanks
Did you have to make each bend by cutting the led strip at each angle, or was it a single strip & you somehow bent it or folded the strip over to make a bend/angle? Want to make a solid piece like Oracle makes for this car, but its for a totally different car.....
I had to cut for every angle
How did you trick the cars computer into having LEDs without having it think there was a missing hollagene bulb. On mine I had left the oem ones plugged in and hid them in the trunk. I made a similar replica to these but water got in through the back center light and shorted out an LED strip.
Resistors
If you don't want to spray paint them it's cool I just want the tailights to work like that please help me lol... I have a build that's almost done and this would be the perfect addition... Please contact me so I can buy it from you just let me know how much you want for the job
Hey brother so I started this project, trying to figure out how you got the middle tail light lens off? Did you Dremel the trunk bezel off from the back and then glue it back?
Dremel it in half then epoxy back together
@@WINOBOT Good morning. I will be doing a 2014 Challenger build/giveaway next year on UA-cam and I would love to have you do these custom taillights. Would you be willing to do it, let me know.
Just take my money and make me these!!
So you said later on the road I’ve been waiting to see if you would sell them now or is there a link to anything sim
I'm very interested in potentially purchasing either version of these taillights. If your still selling some let me know
Could you send me a list of things I need to buy to complete this job
Thnx for the great video, quick question plz, did u remove from inside the light to fit the corner bead?
Where exactly are you asking about?
At 0:31 while u r putting the beads, i tried but it doesn’t fit unless i trim from inside the lights housing (the bridge in the middle and in the corner)
@@willa5060 i cut the bead down so the top half of the housing fits if that's what you're asking. But i don't build them like that anymore, i put the bead in upsidedown and screw it to the housing. This assures me that it will never come loose, the epoxy will eventually fail. Whether that's a year or 5, who knows but it will eventually.
I appreciate the help so much , all the work im doing is inspired from u , thnx alot
Super slick looking man. Are you selling these or even interested in selling a set?
Hello , are you selling those. Interested .
Stopped selling them a while ago. Was thinking of making a few more though. I'll let you know if I do.
Aye bro im in Florida too you can make me a set of those
Can I place an order ?
Sure, you local? Fl.
Nice! But no reverse lights?
They're still in the center, just tinted to blend in.