Products that we use and recommend: ► Buy Headlight: amzn.to/3YzYW9p ► Panel Removal Set: amzn.to/3YiMADu ► Assorted Fuses: amzn.to/4fx4s3F ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Castrol Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
pay more attention to your camera position...you were way off the headlight assembly when it was being removed. Next time watch the man work and line up through the camera screen instead of looking at the guy working while trying to aim the camera and guessing if its lined up right.
Thanks a lot. On my version with xenon bulbs, there is simply not enough space around the headlight housing to remove the bulbs. It's a shame I have to remove the front bumper to change bulbs, but at least I now know how to.
Overall informative however attention needs to be placed on video framing of subject material. In many cases the verbal description referred to items out of view of the camera.
Great information but your camera person has got to get better because half the time they are not showing what the person is actually doing making it hard to actually see.
If all you need to do is replace the headlight bulb, you do not need to take the bumper off. There's another UA-cam video of under 3 minutes that shows how to do this. It's very easy; take two minutes. It's important that you don't touch the glass bulb with your fingers as oils from your fingers can cause problems. Wear thin rubber gloves, or atleast hold a paper towel.
Hi, can that small black plastic cover pop out at each side lower corner without removing the entire front bumper? I like to install after market fog lights in those locations . Does anybody know if they were removable?
It's not just headlight changing, it's the entire housing. Eg: im trying to take the headlight housing apart to clean the inside. Granted, there seems to be 0 information on how to take the plastic cover off anywhere in the damn internet.
I took mine out of Mazda 3 2005. Installed a new one. Supposed to work with my year. But.it won't do anything. Won't turn on. It has halos too and don't know how to splice those. It has a lot of extra cables. But they are obvious how they connect. I just can't get the damn thing to turn on.
I believe the DRL go at the bottom of bumper cover below the fog light most cars have neither most cars required day time running lights in Canada only
that underneath plastic garbage aint never going back on mine, wait till a kid at Jiffy lube drops a flat screw driver down there and it rattles for 2 years and you keep troubleshooting the engine for noises and knock
No offense but some of you suck at holding and aiming the Camara. Plus the last part wasn't very detailed on how to remove the head lights. Big thumbs down
Lol I'm sorry but why u remove the bumper and the plastics cover from the fenders wow u can reach all 3 screws without removing all dose parts lmao and please focus more on what u filming u can no even where is the screws located I have to pause the video like 3 times but thank you for sharing the video
Bro missed filming literally every fucking bolt, screw, and clip. Too busy rambling on and on and on and on and on and on and on to focus on filming. At least they put it out there into the world. Lets me know what I need to look out for, so thanks for that.
Products that we use and recommend:
► Buy Headlight: amzn.to/3YzYW9p
► Panel Removal Set: amzn.to/3YiMADu
► Assorted Fuses: amzn.to/4fx4s3F
► Tool Set: amzn.to/3p5MM6t
► Screwdriver Set: amzn.to/3XRB28Q
► Castrol Oil: amzn.to/3xBc8B9
► Oil Filter: amzn.to/3w0Ulme
► Torque Wrench: amzn.to/32qyRwg
► Liqui Moly Engine Flush: amzn.to/3IiDBID
► OBD Scanner that we use most often: amzn.to/3I4MQfe
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics
pay more attention to your camera position...you were way off the headlight assembly when it was being removed. Next time watch the man work and line up through the camera screen instead of looking at the guy working while trying to aim the camera and guessing if its lined up right.
I agree... he did great when going to remove the front bumper..but not so good when it came to removing the headlight
A handy rough guide
Lllcllllm'zxx'c⁵'@@ericmccolough2482
This video looks very concise and clear step by step. I'll let you know how it goes thank you for posting!
Also i have a 2014 hopefully its not much different
How it go ?
Deer took out my headlight and I needed this to see how easy it can be to replace it, thanks!
These guys are so helpful. These videos really helped save me a tonne of money.
Keep on making the videos guys. 👊🏽
Thank you gentlemen. Happy holidays
take a shot every time this guy says "we need to"
Verry good, this helped me remove old yellow bulbs and put led blue ones👍🏻
This was awesome! Thank you for making this tutorial.
Thanks for your experience. You saved me a lot of times.
Thanks a lot. On my version with xenon bulbs, there is simply not enough space around the headlight housing to remove the bulbs. It's a shame I have to remove the front bumper to change bulbs, but at least I now know how to.
Thank you guys, you saved me money!!!
Just did this on wife’s car. Exactly how her 2010 was set up. Easy install.
good guy. easy explanation. grateful
thanks, it was hard, but it worked!
Thank you so much for the video. Made my headlight change so easy.
thanks, worked like a dream
This was actually helpful in my opinion. Yes we missed the final part of removal but meh
Overall informative however attention needs to be placed on video framing of subject material. In many cases the verbal description referred to items out of view of the camera.
thanks a ton. very helpful
Thank u now I know I knew it was gonna be complicated but is one a one time job
Thank you so much, it was really helpful
Informative and helpful. But everyone here said it already camera placement is bad.
Helpful video, thank you!!
Thanks man
First video that showed me how to remove the bumper and headlight the other ones are just the headlight removal after they removed the bumper
Great information but your camera person has got to get better because half the time they are not showing what the person is actually doing making it hard to actually see.
Very helpful
Nice and thanks for the video but I agree next time watch the placement of the actual camera lens shot.
Is this the same for a 2012 Mazda 5? I can't find a video but the front end looks similar.
Watching him chip that fender paint was painful but helpful none the less .
If all you need to do is replace the headlight bulb, you do not need to take the bumper off. There's another UA-cam video of under 3 minutes that shows how to do this. It's very easy; take two minutes. It's important that you don't touch the glass bulb with your fingers as oils from your fingers can cause problems. Wear thin rubber gloves, or atleast hold a paper towel.
You did great on describing how to remove the headlight but you didn't do well on showing how as you described it.
Couldn't even see how to remove it!
Great thanks
why you doing all this extra stuff when they’re removable from under the hood?
Hi, can that small black plastic cover pop out at each side lower corner without removing the entire front bumper? I like to install after market fog lights in those locations . Does anybody know if they were removable?
You do not have to take off that bumper to do this dude !!
Lew Scagnetti how can I take out that headlight then bro?
i didn't have to remove the bumper. lifted the hood and bingo. changed the headlight
It's not just headlight changing, it's the entire housing. Eg: im trying to take the headlight housing apart to clean the inside. Granted, there seems to be 0 information on how to take the plastic cover off anywhere in the damn internet.
What a f****** nightmare change a stupid headlight
I took mine out of Mazda 3 2005. Installed a new one. Supposed to work with my year. But.it won't do anything. Won't turn on. It has halos too and don't know how to splice those. It has a lot of extra cables. But they are obvious how they connect. I just can't get the damn thing to turn on.
Actually removing this bumper seems pretty easy you just unbolt it nothing hard or complicated so it isn't that bad.
Does anyone know if this headlight assembly has a daytime running light in it? If so where?
I believe the DRL go at the bottom of bumper cover below the fog light most cars have neither most cars required day time running lights in Canada only
that underneath plastic garbage aint never going back on mine, wait till a kid at Jiffy lube drops a flat screw driver down there and it rattles for 2 years and you keep troubleshooting the engine for noises and knock
thanks for the video your Borat right
how long do you think it takes all together
Was the camera guy drunk. Damn I couldn't see anything
6:41 🤣🤣🤣
No offense but some of you suck at holding and aiming the Camara. Plus the last part wasn't very detailed on how to remove the head lights. Big thumbs down
Lol I'm sorry but why u remove the bumper and the plastics cover from the fenders wow u can reach all 3 screws without removing all dose parts lmao and please focus more on what u filming u can no even where is the screws located I have to pause the video like 3 times but thank you for sharing the video
Get a good cameraman
with steady hands
It would be a great video, except your camera work is absolutely atrocious.
Bro missed filming literally every fucking bolt, screw, and clip. Too busy rambling on and on and on and on and on and on and on to focus on filming.
At least they put it out there into the world. Lets me know what I need to look out for, so thanks for that.
Worse cameraman ever, all the main moments and details are outside of the camera scope...
who tf was filming?
Get someone else to do the filming next time. He has what you are doing at the bottom a of the screen and just out of sight most of the time.
Grabas de la v...
Horrible camera work. Better off just figuring it out myself.
LOL