Making DIY Li-ion batteries for RC

Поділитися
Вставка
  • Опубліковано 6 вер 2024
  • This video shows how I make my own Li-ion battery packs for my RC planes and multicopters. I use a spot welding machine to avoid soldering directly to the cells. Most RC vehicles can use Li-ion batteries, and they have many advantages compared to common LiPo batteries. Li-ion gives roughly double the flight time because they carry more energy for the same weight, they also have a longer lifespan (last more charge cycles). 18650 cells are also safer in my opinion, because they are mechanically more robust than pouch style LiPo cells, making them more likely to survive hard crashes without damage.
    My website: axelsdiy.brinke...

КОМЕНТАРІ • 53

  • @megamanconrad
    @megamanconrad 4 місяці тому +2

    Just getting back in the hobby. Legit work my dude

  • @mamodechowtee6356
    @mamodechowtee6356 4 місяці тому +1

    This battery making is professional 😮😮😮😮

  • @Alrusais89
    @Alrusais89 11 днів тому

    I want to buy one battery charger power my
    machine by 12VDC × 30A, how can i buy one?

  • @BartleyNorman
    @BartleyNorman 6 місяців тому

    AWESOME KNOWLEDGE. I am going to make some for my Autel X-Star and Zino's and Autel Evo.

  • @dono1982
    @dono1982 5 місяців тому +1

    No BMS?

    • @AxelsDIY
      @AxelsDIY  5 місяців тому +2

      No, BMSes are not commonly used in those kinds of batteries for RC vehicles. The batteries are charged, balanced, and monitored by the charger using the balance lead. But for all other applications, yes, you should use a BMS!

  • @farkhodkhikmatov4738
    @farkhodkhikmatov4738 3 роки тому +1

    Thank you brotha!! I love your professional work!

  • @Steph.98114
    @Steph.98114 Рік тому +2

    Do not glue the batteries together!!!!! The outside is negative, the only thinking stopping a short is the thin plastic, use the dividers that are designed for the battery

    • @AxelsDIY
      @AxelsDIY  Рік тому +4

      Yes. I know that the outer casings of the cells are connected to the negative terminals. But the heat shrinks around the cells are good isolators, and both cells that are touching have heat shrinks, so technically, it is double isolated. I don't like the plastic separators since that makes the batteries larger, heavier, and bulkier. Not good for RC applications. But you should probably use plastic separators if you build batteries for E-bikes and similar...

    • @smellymala3103
      @smellymala3103 7 місяців тому

      Hahaha the video has only just started and I was in this thread, and after reading the first comment I thought to myself well I'll just split the difference and use a hot glue gun... 😂 😂 We are hobbyists man you think s*** isn't exploding around here all the time! 🤣

  • @vishal01mehra
    @vishal01mehra 3 роки тому +1

    Lovely work.

  • @riddimv
    @riddimv 9 місяців тому +1

    Excellent😊

  • @CRUSH_SHOTS
    @CRUSH_SHOTS Рік тому

    iam using 3650 6900kv motor with surpass hobby 60a esc 3A what c should i use in my lipo

  • @-fathakker
    @-fathakker 4 місяці тому

    Brother what's different of 3s lipo battery and 3s li ion battery in the rc

    • @AxelsDIY
      @AxelsDIY  4 місяці тому

      The Li-ion battery has a slightly lower voltage. It can't provide as much power (Amps), but it has slightly more capacity (mAh) for the same weight which will give longer flight times.

    • @-fathakker
      @-fathakker 4 місяці тому

      @@AxelsDIY This means, for example, that the Lipo gives 100% power and the Li ion gives 50% power?

  • @Xmtq3000
    @Xmtq3000 9 днів тому

    The way it should be done

  • @user-tq6qp9cs3l
    @user-tq6qp9cs3l 8 місяців тому

    brother i have a battery pack its made with 8 piece of 18650 batteries...so my bicycle light have six 3w led....I made it work with 3.7 v.. my battery pack have (4300mah*8) 34a btw i want to know How do I calculate the bulb working time?

    • @AxelsDIY
      @AxelsDIY  8 місяців тому

      If the data is correct, you have a 16W load powered directly from the 3.7 V battery voltage, this gives a current of (16/3.7) = 4.32A. The battery is a 1S 8P configuration with 4300 mAh cells * 8 = 34400 mAh = 34.4 Ah. 34.4 Ah / 4.32 A = 7.96 h, almost 8 hours of runtime.
      But I would not trust the data! You probably need to measure the current of your lamp. It may be lower. Also, there are no 18650 cells on the market with 4300 mAh. Maybe it is 21700 cells? Or maybe a fake rating. You could probably test the battery with a charger/tester to measure the actual usable capacity.

    • @user-tq6qp9cs3l
      @user-tq6qp9cs3l 8 місяців тому

      Thanks brother ur right..this battries are not 18650...thanks for the explanation@@AxelsDIY

  • @siddharth4662
    @siddharth4662 6 місяців тому

    what is the C rating of the 18650 cell that you have used in the packs?

    • @AxelsDIY
      @AxelsDIY  6 місяців тому +1

      Those are LG HG2 cells. They can handle 20A continuous current, and since the rated capacity is 3000mAh (3Ah), the C rating is 20/3 = 6.67

    • @siddharth4662
      @siddharth4662 6 місяців тому

      @@AxelsDIY thank you so much

  • @RandomGuy-px8yr
    @RandomGuy-px8yr 8 місяців тому

    No protection board needed for over-discharging?

    • @AxelsDIY
      @AxelsDIY  8 місяців тому

      No. You really don't want it in this case. It is more important to keep the RC plane/drone controllable than prevent damage to the battery from over-discharging. But in almost all other applications, a BMS should be used to protect the battery.

    • @farhanfaiz1998
      @farhanfaiz1998 4 місяці тому

      No protection board needed if u have a good balance charger that can charge Lipo,Li ion ,Ni Mh etc

    • @gasisthepastendoil
      @gasisthepastendoil Місяць тому

      I really hate the shape of those pk for an RC airplane

  • @jishanagrawal1285
    @jishanagrawal1285 Рік тому

    Which charger can we use to charge this battery
    Please tell

    • @AxelsDIY
      @AxelsDIY  Рік тому

      Almost all chargers for "hobby LiPo batteries" also have a setting for Li-Ion batteries. Personally, I have a bunch of ISDT Q8 chargers, but there are a lot of other brands and types as well. The only difference with Li-Ion compared to LiPos is that the recommended charge-end-voltage is 4.1V instead of 4.2V.

  • @MrIMacro
    @MrIMacro 8 місяців тому

    What is the model of the spot welder please? And do you recommend it? Because i have bought one before and it exploded.

    • @AxelsDIY
      @AxelsDIY  8 місяців тому

      It's a "sunkko 737G". It has worked fine for me. There are no problems with the welder itself. But I have blown a few fuses using it. It draws a lot of current momentarily. Here in Sweden we usually don't have more than 230V 10A in the wall sockets, but I have learned to plug it into a special socket with 16A and I also use an extension cord to create some voltage loss.

    • @WINTIMA
      @WINTIMA 16 днів тому

      Your videos is great, I want to buy a lipo that will cost me like 200 dollars but know less than 50 dollars I will build some

  • @AmjedTh
    @AmjedTh 10 місяців тому

    Good day friend
    How can i make battery 2200 mAb 18v

    • @AxelsDIY
      @AxelsDIY  10 місяців тому

      For 18 volts you need 5 cells. 2200mAh is very low for 18650 cells. Is this a replacement for a commercial battery pack for an electric drill or something like that? They usually use cheaper cells with very low capacity to save costs. You can choose cells with a higher capacity without any problems if you want. Also, keep in mind the current draw, make sure the cells can handle it, and maybe if you need a BMS for protection.

  • @harshadgunjikar1595
    @harshadgunjikar1595 3 роки тому

    Can I charge them with 12v 1 amp adapter????

    • @AxelsDIY
      @AxelsDIY  3 роки тому +1

      No, you need to use a balance charger to charge those battery packs. Depending on what type of charger you use, and what charging current you use, you may be able to power the charger from that adapter. But it will take multiple hours to charge that way. A bigger power supply is probably more reasonable. Of course it depends on yore application, and how you will use the battery. Maybe it is OK to charge slowly...

  • @sricharan7287
    @sricharan7287 3 роки тому

    Hello sir video is just superb I have a quad which draws less than 20 amp I want to increase the flight time of my quadcopter up to 20 min plus can I pls my electronics can handel up to 4cell
    Pls say me which cells to use

    • @AxelsDIY
      @AxelsDIY  3 роки тому +1

      You need to know the current while hovering (or flying at the speed you want). Then you can calculate the capacity you need. If the quad draws an average of 20 amps and you want 20 min flight time (1/3 hour) you need a capacity of 20 * (1/3) = 6.66 Ah. 2 or 3 cells in parallel may be a good solution. My personal favorite is probably the LG HG2 cells. I think they are a good balance between high capacity, high current capable and relatively low cost compared to others. They will work in your application also. Molicel P42A 21700 are also great, but more expensive.

  • @isavv_
    @isavv_ Рік тому

    Thank you for the video! Don't you have to stack nickel strips to get the 35A current draw? I'm asking cause I'm forced to make my own packs cause I live in an island and I can't import batteries, but I can find 18650. I'm going to use 0.15mmx8mm nickel strips.

    • @AxelsDIY
      @AxelsDIY  Рік тому +1

      It depends on how you are going to use the batteries. For RC applications, it does not matter that some energy is lost and converted to heat. 0.15mmx8mm will work fine for 35A, but it will heat up over time. For the larger batteries with more cells in parallel, I usually use one strip for every cell, for example, a 2P battery may have 2 nickel strips connecting to the neighboring cells. But I have never double-stacked nickel strips. Of course, that is also an option if you have a very demanding application.

    • @isavv_
      @isavv_ Рік тому

      @@AxelsDIY Thank you for answering! My only concern is for the strip to fail and the drone to fall out from the sky.

    • @AxelsDIY
      @AxelsDIY  Рік тому

      ​@@isavv_ I understand. But that has never happened so far. Actually, some of my batteries have been through extreme crashes, which have totally destroyed RC planes, but the batteries have survived without any damage. I think my Li-Ion batteries are may more durable than off-the-shelf LiPos using pouch cells, usually used in RC models.

    • @isavv_
      @isavv_ Рік тому

      @@AxelsDIY That's very reassuring! But clearly you know what you're doing! I will do a lot of research on how to understand if I'm doing a solid weld on a test cells and then try to build my pack.. Thanks again!

  • @Tinkoplayz
    @Tinkoplayz 7 місяців тому

    I need order

  • @Andrew-vr5bb
    @Andrew-vr5bb Рік тому

    Can soldered connection be used ?

    • @AxelsDIY
      @AxelsDIY  Рік тому +1

      I assume you mean soldering directly on the cells instead of spot welding. No, it is not recommended. It is very easy to damage the cells by applying too much heat or even start a thermal runaway or fire.

    • @Copuim
      @Copuim Рік тому

      @@AxelsDIY but what if I don’t have a spot welder

    • @Steph.98114
      @Steph.98114 Рік тому

      ​@@Copuimgo buy one, it's the only way to do it safely.

    • @DaveSmith-cp5kj
      @DaveSmith-cp5kj 9 місяців тому

      @@Copuim Then you buy one, lol

  • @deneste3580
    @deneste3580 Рік тому

    Hi! What’s their C rate?

    • @AxelsDIY
      @AxelsDIY  Рік тому

      It depends on the cells used. For example, the LG HG2 cells can handle 20A continuously. They have a capacity of 3000mAh. That makes them about 7C. Some Li-ion cells are worse, and some are better. Cells will a lower C-rating usually have more capacity.

  • @MDNOWFALASFARASFAR-ik7ht
    @MDNOWFALASFARASFAR-ik7ht Рік тому

    Battery price bro

  • @gasisthepastendoil
    @gasisthepastendoil Місяць тому

    ..... Those kind of batteries didn't work Super heavy and almost no power at all I don't know what this guy's doing..... It would probably work in an RC boat