Building & Installing Metal Roof Trusses 28'

This video shows the entire truss building process from raw materials through completed installation of the roof.
here's a link to the truss anchor video
• Making truss anchors, ...

[@elgatillo863]

Hey man!! I love this video. Thank you for this!!!

[@ziauddin7948]

good triangle shape truss production with angle pipes # 🇵🇰

[@zoharflax6363]

I really appreciate your work! Thank you for sharing. Do you come up with the designs for these trusses from gut feeling of materials to use or you use officially engineered plans?

[@CreativityUnleashed]

I design most everything myself and then have an engineer look it over.

[@ramilvega7686]

How did you anchor those metal truss to the concrete wall? Did you weld them on some rebar dowels?

[@CreativityUnleashed]

Here's the link to my video on how to make the trust anchors.
ua-cam.com/video/vBtcW92Ptu0/v-deo.html

[@engineer_yulan]

What size and type of bottom cord do you recommend for truss 45' long with supports only on end.=?

[@CreativityUnleashed]

that's a difficult question not knowing the details.
but you may find the video on my channel on making 46' truss helpful.

[@CreativityUnleashed]

ua-cam.com/video/feUHaiL_FPw/v-deo.html
it's 40' but white the over hangs It's 46'

[@gregorymathot468]

Hi Darren, which software did you use to calculate the size from the trusses ?

[@CreativityUnleashed]

I use fusion 360 for the most part but I mainly just draw I haven't figured out all the features for calculating the strength of material

[@arunraja3957]

Hi... How can trusses placed on solid block (brick pillar) without rcc column

[@treetop5752]

Light snow load, diaphragm design.

[@fafunwaayomide5607]

Do you do this process to a building as wide as 25m by 22m

[@CreativityUnleashed]

I think for that size I would do it quite a bit different.

[@ToaKingz]

What’s the cost to build a roof like this?

[@CreativityUnleashed]

Well materials have changed a lot in price over the last six months or year but when I build it
I just looked at the spreadsheet the material cost was $2988.25 USD and I think that was everything roof
but just over the last six months I’ve seen a lot of material cost just about double in price! I miss when Donald Trump was in office things worked out a lot better then

[@ToaKingz]

@@CreativityUnleashed that’s not a bad price. I love what you guys are doing. Keep making these amazing videos.

[@mortvid]

@@CreativityUnleashed FJB for sure

[@spacecookie1091]

Poorly installed. 😬

[@johnrowley3049]

what is the round stock you used? pipe? cold roll? rebar? size?

[@CreativityUnleashed]

it's 1/2" round bar

[@Binitabanamali]

What is the size of ms angle used? I mean depth of angle.

[@CreativityUnleashed]

I am not sure that I understand what you are asking. It's a 4"/12" roof pitch if that's what you are asking.

[@Binitabanamali]

No no.. I am asking about size of angle used as rafter and main tie

[@CreativityUnleashed]

(1.5"x1.5"x1/8")(40mmX40mmX3.175mm)

[@Binitabanamali]

Thank u ...

[@TechJoy206]

I need the iron plates in small size what should I search for them

[@CreativityUnleashed]

What are you looking for?

[@reinventnourtv967]

Hi Mr 210 sq. Meter residential house
What is the materials needed for trussess and roofing? And how many pieces might need.

[@CreativityUnleashed]

That would be a complicated question to answer without a lot of information.
Such as do you have a snow load what wind forces do you get in your area what are your local building codes.
it probably would be best to consult a local engineer over the different variables for your location and application.

[@reinventnourtv967]

@@CreativityUnleashed ok thanks

[@MITHAGEE120]

I need a job