I like that you decided to thread the line through the motor port and through the stock, personally I would have done it through the gap behind the trigger switch and through the pistol grip but like you said the amped line is quite thick so you made it work.
Literally just finish installing a P* F2 in a lambda defence Mk48 mod 1 but I put the line in the gab behind the trigger and... well... I like that it looks better and is usable for right and left handers but dam is tight, definitely going to be using gloves for this beast. Cool video, got to admit it convince me to get the gun and install the engine
It's been a while since but to make it work you can just follow the video, the is not much to it, but personally I prefer to avoid modify the experior as much as possible, so instead of cutting the stock, I ran the air line through a little gab between the pistol grip and the stock, literally the is a gap directly to the gearbox, you need to do some dremeal to the gearbox but totally worth it, just use a sharpie to mark the place before dissambly so u'll know where it needs to go, also, instead of putting the electronics and battery in the back, I put it up front, is a bit of a hustle but u have space for a big battery because it also feeds the mag which is a big motor but damn, pulling the triggear and automatically feeding bbs without worrying for extra batteries is awesome. The one thing I realized afterwards is that kinda worth it buying the p* fusion engine, is a quicker swap, but I don't really have any complains with my f2 in there, it's been magdumping like nothing, with a double tank setup it shots thousands of bbs
no alignment issues? didnt have to shim the engine back or forward? Good video and very very helpful to newer players installing hpa engines in this gb. BUT i just wish these videos would show the testing after install with a chrono and other build specs. I.e. barrel length, bucking, PSI on tank, yadayadayada, In any event. Great video man
Can you put the wire harness through the front of the gun into the hand guard with some maneuvering and maybe dremeling. I’m not a fan of the regular stock and planning on getting a new one without the capability of putting a battery and fcu in it? Thanks
So I'm kinda new to this, was the SAW an AEG before you gutted the gearbox? I just bought the A&K Para and I want to use it as an HPA body, is this what you are doing now?
Yes this was an AEG. I gutted the gearbox and installed my HPA setup in it. Unfortunately I sold that SAW body for a different gun. But the A&K Para is the same thing and will be much better. I got rid of mine because it was ridiculously heavy.
Ok so obvious noob to HPA. I have a Polarstar jack for my m4, uinstalled and I want to put it in my A&K M60. Since it's the same gearbox as the M249 do you think this would work?
Stop saying um every sentence, it makes you seem like you have no idea what you're talking about or doing. Rehearse this if you have to, like you said you don't see a lot of these tutorials out there.
I like that you decided to thread the line through the motor port and through the stock, personally I would have done it through the gap behind the trigger switch and through the pistol grip but like you said the amped line is quite thick so you made it work.
Matt Bridge Thanks for watching!
You make m249 go BRRRRRRT BRRRRT
I modified mine by using real bullets on the belt, I took the gunpowder out obviously but it makes it look 10xbetter
For sure it does!
Literally just finish installing a P* F2 in a lambda defence Mk48 mod 1 but I put the line in the gab behind the trigger and... well... I like that it looks better and is usable for right and left handers but dam is tight, definitely going to be using gloves for this beast. Cool video, got to admit it convince me to get the gun and install the engine
Hey, if it isn't too much to ask could you run me through any modifications you had to do to make it work? I'm planning on putting a p* in my lambda
It's been a while since but to make it work you can just follow the video, the is not much to it, but personally I prefer to avoid modify the experior as much as possible, so instead of cutting the stock, I ran the air line through a little gab between the pistol grip and the stock, literally the is a gap directly to the gearbox, you need to do some dremeal to the gearbox but totally worth it, just use a sharpie to mark the place before dissambly so u'll know where it needs to go, also, instead of putting the electronics and battery in the back, I put it up front, is a bit of a hustle but u have space for a big battery because it also feeds the mag which is a big motor but damn, pulling the triggear and automatically feeding bbs without worrying for extra batteries is awesome. The one thing I realized afterwards is that kinda worth it buying the p* fusion engine, is a quicker swap, but I don't really have any complains with my f2 in there, it's been magdumping like nothing, with a double tank setup it shots thousands of bbs
nice video brother, keep it up👍
Thank you!
Thank you bro for explain all these i like it
no alignment issues? didnt have to shim the engine back or forward? Good video and very very helpful to newer players installing hpa engines in this gb. BUT i just wish these videos would show the testing after install with a chrono and other build specs. I.e. barrel length, bucking, PSI on tank, yadayadayada, In any event. Great video man
Sorry I don’t have a chrono. But thanks for the recommendation.
Is the jacked good enough for lmg or is it not efficient enough? Is it better to just spend the cash can get the F1 or F2?
Do you know if it is possible to make work an f2 o jack polarstar kit into a m249 by specna arms???
Can you put the wire harness through the front of the gun into the hand guard with some maneuvering and maybe dremeling. I’m not a fan of the regular stock and planning on getting a new one without the capability of putting a battery and fcu in it? Thanks
I am sure there is a way to but you might need to get a longer HPA hose and the deans hook up needs to be longer
What about the feather weight and it's v2 gear box. Where do I find the 30ft long nozzle?
Check out this official guide from polar star ua-cam.com/video/MZn4CXTVki4/v-deo.htmlsi=Jjqn67dwUlToHU9m
Is the trigger board necessary to run this build, or will a standard Jack M249 HPA kit suffice?
So I'm kinda new to this, was the SAW an AEG before you gutted the gearbox? I just bought the A&K Para and I want to use it as an HPA body, is this what you are doing now?
Yes this was an AEG. I gutted the gearbox and installed my HPA setup in it. Unfortunately I sold that SAW body for a different gun. But the A&K Para is the same thing and will be much better. I got rid of mine because it was ridiculously heavy.
@@battlemonkeysairsoft7773 thank you very much, I know zero about upgrading and HPAs so I need a lot of this information
Ok so obvious noob to HPA. I have a Polarstar jack for my m4, uinstalled and I want to put it in my A&K M60. Since it's the same gearbox as the M249 do you think this would work?
If they have the same gearbox maybe it will work the same but I am not familiar with the gearbox for the M-60.
@@battlemonkeysairsoft7773 Thank you for the response. I think i'm gonna try it.
It should work if you have not done it yet
I know that thus video was posted a year ago but does anyone know what size the bolt is
Can I use a polarstar f2 instead of a polarstar jack?
LipSlide21 it should be the same but you might want to check up that with F1 dealers first.
how was getting it aligned?
How does it perform at long games and milsim?
Last forever it gets very heavy tho
In total how much would it cost to do this?
Well assuming you have the gun already, the kit I bought was like $100 maybe.
@@battlemonkeysairsoft7773 how well has the jack held up in the a&k m249? I’ve been wanting to get a m249 and throw a jack into it
Do you have any idea how I’d get the hose to work on a m249 para
through the grip where the trigger is
@@bigtesticulars9140 cool
You could’ve done the hole right under that hole you already made that’s hole looks bad
😂
Stop saying um every sentence, it makes you seem like you have no idea what you're talking about or doing. Rehearse this if you have to, like you said you don't see a lot of these tutorials out there.