I've had David's 10 Moxon for a couple of weeks and man, does this thing work. It's very compact, set up is about 5min, light weight and everything feels really solid while keeping the weight down. Quality parts being used. Two days ago I demonstrated this antenna for a friend who has a multi-band vertical from Comet (i think that was the brand) I'm in Mesa, AZ and I worked Italy, Germany, two Spain stations and the Czech Republic, all with 55 of better reports and comments like "very strong signal", 100watts on a 17ft MFJ push up mast. We flipped his antenna switch between the Comet and the Moxon and the Comet couldn't hear 50% of what the Moxon could hear. It was SIGNIFICANT... The video quality and audio could be better but don't let that dissuade you from his antenna. The thing WORKS GREAT! Rob - AK7RM
Great concept - easy to build and very effective. I used your video as an inspiration an designed the middle as a part to be 3D-printed ("Moxon 10 m" on thingiverse, with a link to your video). I use 16 mm tubes as I use this antenna portable in first.
Hi David, super Antenne !! Nachdem ich vom Baumarkt noch 4 Leerohre je 2m besorgt hatte, sofort montiert und schon erste QSO‘s mit der USA führen können. Kann ich nur empfehlen. 73 Joachim DL1JH
Hello, it is a nice light moxon! I would be interested in it, if you can add also 6m and/or 15m band. Adding 15m band would require longer pipes, however adding 6m band would require only additional wires.
Toller Ansatz! Das mittelstück sieht toll aus, vorallem die Befestigung in der Mitte für den GFK Mastern ist sehr gut. Verwende selber schon seit vielen Jahren eine Moxon für Prortabel Betrieb. Allerdings ist für mich wichtig das ein Aufbau ohne Werkzeug funktionieren muss. Für die Ausleger verwende ich günstige Stippruten. Als Halterung (mittelstück) verwende ich 2x 15mm 50cm alu rohre wo man dann die Stippruten einfach rauf stecken kann. Eine kombination aus deinem Mittelstück und den alu rohr wäre sicher eine überlegung wert.
This looks like a great antenna for me to build, are those end plugs, the feeding point and the insulators, 3D printed by you, and where can I get them?
Einfach klasse David! Es gibt einfach nix schöneres als QRP QSOs. 🙂 Deine Moxon werde ich mir nach meinem Nachwuchsstress vermutlich zulegen müssen. Grüße Heinrich DO1HFS
Hallo David, DL2YMR hatte im Video über den Aufbau der Moxon erzählt, dass es eine Email zum Bestellen gibt. Ich habe aber keine E-Mail etc. gefunden. Wie und wo kann ich bei Dir bestellen?
I had the same question, just got the response. David said he has tested it up to 700watts (.7KW) but I wouldn’t put that much through it myself without solid testing at that power. That’s just me... :-)
Moin David, da hat DL2YMR ja was tolles gezeigt und du ein neues Abo. Aktuell bin ich auf 11m QRP, jedoch evtl bald mehr, (#Klasse N) Gerne bestelle ich die Antenne, hab aber keinen Link oder ähnliches gefunden. Die passt super mit in meinem Camper. 73 nach Aachen Ich bin erstmalraus... Liebe Grüße aus Wolfsburg Marco
Very good built but I would like to see how the two bands are shown on a SWR instrument. By the way your audio quality suffer quite a bit due to the wind. 73 Cesar - PY1SW.
@@QRP.lifestyle also ist sie eher im 11m bereich in resonanz mit den dimensionen?!und du vertreibst den bausatz?!ich habe starkes interesse mal deine moxon bei nem fieldday zu testen.wäre dir zu dank verpflichtet wenn du mich mal diesbezüglich anschreibst,73 best regards
I've had David's 10 Moxon for a couple of weeks and man, does this thing work. It's very compact, set up is about 5min, light weight and everything feels really solid while keeping the weight down. Quality parts being used. Two days ago I demonstrated this antenna for a friend who has a multi-band vertical from Comet (i think that was the brand) I'm in Mesa, AZ and I worked Italy, Germany, two Spain stations and the Czech Republic, all with 55 of better reports and comments like "very strong signal", 100watts on a 17ft MFJ push up mast. We flipped his antenna switch between the Comet and the Moxon and the Comet couldn't hear 50% of what the Moxon could hear. It was SIGNIFICANT... The video quality and audio could be better but don't let that dissuade you from his antenna. The thing WORKS GREAT! Rob - AK7RM
Nice build, I am a huge fan of the Moxon antenna
Works great and is lightweight
Great concept - easy to build and very effective. I used your video as an inspiration an designed the middle as a part to be 3D-printed ("Moxon 10 m" on thingiverse, with a link to your video). I use 16 mm tubes as I use this antenna portable in first.
Megépítem 10 méterre, adtál néhány jó tippet. Köszönöm!
Hi David, super Antenne !! Nachdem ich vom Baumarkt noch 4 Leerohre je 2m besorgt hatte, sofort montiert und schon erste QSO‘s mit der USA führen können. Kann ich nur empfehlen. 73 Joachim DL1JH
Hello, it is a nice light moxon! I would be interested in it, if you can add also 6m and/or 15m band. Adding 15m band would require longer pipes, however adding 6m band would require only additional wires.
Yes 6m is possible but it will influence the 10m version. Feel free to test or add.
15m will need longer pipes but PVC pipes are not stable enough.
Toller Ansatz! Das mittelstück sieht toll aus, vorallem die Befestigung in der Mitte für den GFK Mastern ist sehr gut. Verwende selber schon seit vielen Jahren eine Moxon für Prortabel Betrieb. Allerdings ist für mich wichtig das ein Aufbau ohne Werkzeug funktionieren muss. Für die Ausleger verwende ich günstige Stippruten. Als Halterung (mittelstück) verwende ich 2x 15mm 50cm alu rohre wo man dann die Stippruten einfach rauf stecken kann. Eine kombination aus deinem Mittelstück und den alu rohr wäre sicher eine überlegung wert.
Thanx for a sweet project. I wonder whether the reflector works as a director on 12m?
Nice build David fantastic contacts also on a flat battery too well done 73 M7CVK/QRP
Und schon bestellt ,bin sehr gespannt 😊
This looks like a great antenna for me to build, are those end plugs, the feeding point and the insulators, 3D printed by you, and where can I get them?
Great video, Does the Moxon operate vertically or horizontally or do you point it in the direction you are transmitting. Thanks
It's directional, it's really a 2 element Yagi. Point the coax feed point in the direction you are transmitting to.
Amazing QSO. That's S01WS (the prefix is S01).
Absolutely FANTASTIC!❤ 🥰👍
Hi David, frage wie ist das SWR auf den Bändern 10, 11 und 12 Meter ? 73 Jörg
Hello David,
Excellent Moxon antenna build.
Also, I am very interested to learn more about your Drive-on Antenna Mast Mount.
I am in the US. I know you made the Moxon for QRP. Can I put higher power through the moxon?
Einfach klasse David!
Es gibt einfach nix schöneres als QRP QSOs. 🙂
Deine Moxon werde ich mir nach meinem Nachwuchsstress vermutlich zulegen müssen.
Grüße
Heinrich DO1HFS
Hallo Heinrich, ja gern. Das freut mich, melde dich einfach.
73 David DL1DN
Hi, can you also make some longer link-sections which have the correct gap for 15m and 20m bands?
Hey David, i'm interested in your antenna. Do you have a link where we can buy it ?
73!
Nice country too. How is there not any weeds growing in that field?
Würde gerne dieses Moxon Kid erwerben aber wo ?
What length are the pvc poles please m6yik
Put my Moxon (David-Kit) antenna into operation today. Wonderful DX QSOs worked on 10m + 15m.
David : very gooooood stuff 🙂
73 from Bernd
Hallo!
Welcher Mast ist denn hier sinnvoll, primär Sota! Vielen Dank!
nice! bin sehr gespannt. choke nur am fusspunkt oder auch am trx? sehe mehrere im video oder?
An der Antenne reicht
WOW, that is an AWESOME antenna. 73's n1phr
Are these still for sale and shipped to the US?
they should be unless he stopped within the last few weeks. I just got mine, it's a killer antenna!@@skr3wb4llsr40
Hello David
How I can get the email to order this kit? Or its only posible for ham? 73
Hi, I find that a 1:1 choke will degrade my reception by 1-2 S. Is this ok? I have a choke on a toroid with 11 turns of coax
Guten Abend, David.
Gibt es das Video auch in deutsch?
LG Bernd
Are you still ofering the kit? thanks for your response, how i can contact with you 73s
Hallo David,
DL2YMR hatte im Video über den Aufbau der Moxon erzählt, dass es eine Email zum Bestellen gibt. Ich habe aber keine E-Mail etc. gefunden. Wie und wo kann ich bei Dir bestellen?
Well done. Very good vedeo. Thanks for sharing. What power does it stand for ? Many thanks again. 73's
I had the same question, just got the response. David said he has tested it up to 700watts (.7KW) but I wouldn’t put that much through it myself without solid testing at that power. That’s just me... :-)
Thank for good video.🎉🎉
Well done....😀😀😀
The Moxon Antenna is veery nice, and my next wat i need!
Thank You for the good Video and have Fun with this!
73 DE7JWP SWL
Moin David,
da hat DL2YMR ja was tolles gezeigt und du ein neues Abo. Aktuell bin ich auf 11m QRP, jedoch evtl bald mehr, (#Klasse N)
Gerne bestelle ich die Antenne, hab aber keinen Link oder ähnliches gefunden.
Die passt super mit in meinem Camper.
73 nach Aachen
Ich bin erstmalraus...
Liebe Grüße aus Wolfsburg
Marco
Clean build David! Love that drive on mast stand.
72 - KF6IF
Hallo, ich hätte Interesse an einem Bausatz für 11 Meter.
Very good built but I would like to see how the two bands are shown on a SWR instrument. By the way your audio quality suffer quite a bit due to the wind. 73 Cesar - PY1SW.
Yes next time with new microphone.
28500 is 1.3 at 54Ohm
24900 is 2.0 at 73 Ohm but it works
Hi David,can i ask you how much power moxon can handle?? 73s SV1EFA
I had the same question, just got the response. David said he has tested it up to 700watts (.7KW)... :-)
really enjoyed your video. 26 EY 109 South England 73's
do you still offer this kit
How do I purchase a kit?
Just write me an email
Lässt sich das SWR anpassen?
Ja und nein. Wenn man auf 12m perfekt resonant sein möchte, dann sind die Rohre zu kurz
@@QRP.lifestyle also ist sie eher im 11m bereich in resonanz mit den dimensionen?!und du vertreibst den bausatz?!ich habe starkes interesse mal deine moxon bei nem fieldday zu testen.wäre dir zu dank verpflichtet wenn du mich mal diesbezüglich anschreibst,73 best regards
Schade, dass die Erklärungen nicht auf deutsch sind. Leider bin ich der englischen Sprache nicht so mächtig, dass ich alles versehe
Hello David
Nice build of the moxon . Do you have the dimensions of the base plate?
hallo David, ich hätte gern so ein Kit bestellt bei dir, Email kam wohl nicht an? 73! Werner
Hallo 👍 73s , nur ich verstehe kein english
Wenn du Fragen hast, schreib mir.
73
Einfach auf Untertitel automatisch übersetzen und auf Deutsch tippen. 73
@@QRP.lifestyle danke schön
Nice build. Want to create my own too. But for 10 / 11 meters. Do you have dimensions for that also? And probably do you sell parts? Brgrds. PD1RJH