Elevate Your Shop the EASY WAY!! My Shop's SECRET WEAPON!
Вставка
- Опубліковано 1 жов 2024
- ENROLL IN THE ONLINE CLASS HERE:
abundancebuild...
DONATE TO OUR RESEARCH HERE: www.paypal.com...
Welcome to the self-sufficiency revolution! Our channel is your go-to source for sustainable, eco-friendly building techniques using styro aircrete, a lightweight and versatile material made from a mixture of cement, water, and styrofoam. Our channel focuses on alternative building methods and natural building materials, including aircrete blocks and styrocrete. Our expert hosts share valuable tips and tricks for building with aircrete, whether you're looking to construct an aircrete home or incorporate aircrete walls into your renovation project. We also explore off-grid living and minimalist homes, highlighting the benefits of modular and prefabricated homes for energy-efficient and passive solar homes. Our content is perfect for DIY enthusiasts and those interested in alternative building materials, especially green building materials. Follow us for inspiration and advice on building your dream home with sustainable living in mind.
#Aircrete
#BuildingHomes
#EcoFriendlyHomes
#SustainableBuilding
#GreenBuilding
#HomeConstruction
#DIYBuilding
#HomeDesign
#OffGridLiving
#MinimalistHomes
#Homedecor
#HomeRenovation
#HousingSolutions
#AlternativeBuildingMaterials
The information provided in this video is for general informational purposes only. It is not intended to be a substitute for professional advice or instruction. Viewers should always exercise caution and take appropriate safety measures when attempting to build or construct something. The creator of this video is not responsible for any injury or damage that may occur as a result of following the instructions or information presented in this video
Stephen, I'm a big fan! Would not say anything if I had no concern for you. You're an engineer. Machines are designed using a margin of safety. For elevators, the margin of safety is typically >6. Means to lift a 400 lb. load an elevator should be able to actually lift 2400 pounds!!! Harbor freight chinajunk engineers write their specs with SALES in mind .Safety is not even a close second place. So that 1320 lb. "rating". is highly suspect. I know of 2 guys who had a lift like yours fail. Both are permanently injured. Permanent lives of PAIN! Use the lift for loads and not humans . Also you can buy a 30 ft. safety reel. Used by construction workers to attach safety belts to. When they suddenly fall the reel catches them. Could be attached to a lift.
Thanks for sharing!
Best safety, use the lift for goods and equipment. Use the ladder for yourself.
Can magnetic dampers be used to slow down the fall in case the winch fails?
@@cryoraA limitless number of options are POSSIBLE. I have no experience with the device you're inquiring about. Sorry.
I like the idea a lot! Even could double as a repair stand for bringing machines up to a more comfortable working height (a lawn mower for instance)
That is a great idea
Great idea!
When you spoke about the put the motor on the bottom and have the cable go to the top you still be pulling the cables the same speed it wouldn't double your cable you'd have to put your pulley on the elevator and put the hook back up the top that would double your load
Thanks for the tip!
I would use 2 cables on the same winch with 2 mounting points, also some kind of safety brake just incase, shouldn't be too hard to figure out 👍🙂
Thanks for the tip!
I love this, but if you're going to ride it you need to build in a safety brake.
Thanks for the tip!
If mounting the motor on the platform, you don't need to run cable up AND down. Just up. ;) That will also eliminate the long electric cable to the "remote"
Thanks for the tip!
I have a lift just like this but after watching a video of a gentleman falling 8' when the shear pin in the winch failed I decided that I would not ever ride my elevator. I use it to lift material but in my mind I am always imagining it failing, I also make sure there is nothing in the line of fire when I am making a lift or have one suspended on the second floor.
I also added a device along with the winch cable to act as a secondary safety feature. I used the spooling device that someone working at heights would strap to their body harness. It will lock when the strap is reeled out too fast and stop their fall.
I use my ladder to go up and down and use my elevator to lift the heavy loads. It has transformed my barn and brought it to another level. Be safe.
Something like an inertia reel seat belt ?
that's great idea to use the WAH device as a brake, gonna look for an expired one.
Thanks for the tip! Subscribe for new builds coming soon!
I saw that video too. That dude was SUPER lucky he wasn't sitting the other way on that platform, or he'd have hit his head on the workbench on the way down. Seeing him not dead or permanently maimed is enough to make one believe in God. 😅
Great job! Very well communicated. Just went to Vevor, bought the 880# hoist. I'll be using it to make a stair lift for myself, full ankle replacement in little over a month. Thanks again!
You're welcome!
Real elevators have safety brakes for a reason.
Don't ride that thing and instead of believing that 1/2 of 1320 lbs is a safe weight, I wouldn't try to lift much more than 400 lbs, including the weight of the platform.
No brakes and Chinesium winch is too much risk for me. Just be safe and use the lift for lifting and use the stairs for climbing.
well, the safety limit is not the weight at which there is failure, chances are the winch could lift much higher weight before breaking the cable or whatever
@@utubeape the safety limit is zero pounds for human use.
The winch may indeed be capable of lifting more than it's rating because it has a warranty and I'm sure Harbor Freight doesn't want to pay out but the rating I would put on it is how much weight can do an 8' drop on it without destroying the wood studs the rails are bolted to.
As I said, I wouldn't try to lift much more than 400 lbs. Luckily that's quite useful for the task. Not many could climb a ladder with 100 lbs. Still no humans should ride a lift without any safety mechanisms.
@Joe Quixotic To each their own. But in agreement, at least some sort of clicking pin for a break. Stuff like this or roofing hoist on ladders are great for dead weight. "Material" that is. I still love the idea, though.
@@moonolyth real lifts and elevators have brakes on the lift platform or elevator car, not the cable since the cable is a single point of failure.
The idea itself is ok, it just might cause a lot of damage or injury if it fails because it was not designed to fail safe.
Thanks for the tip!
Thats amazing. If I build the house that I want I want this system instead of a staircase. Do you think it would be possible to dismantle the controller and have the buttons mounted in the floor platform so that you can hold something with 2 hands and operate it with your foot.
Probably! Go for it!
The cheapest and easiest safety system for these that I've seen was a seatbelt from a car. It uses the same principal as a fall arrester at a fraction of the cost and easily obtained at any wrecking yard. Great video. Thanks. 👍
Thanks!
modeled my attic elevator after yours and don't believe I managed to live without it. In fact, it was simple and easy to make. Thanks
Great job! You're welcome!
WELL DONE!.. I SHARED w/MY GARDENING GROUP. WE R ALWAYS LOOKING FOR BENEFICIAL DIY PROJECTS THAT JUST MAKE SENSE & SAVE THE BUCK$! I WATCHED YOUR AIRCRETE VID/STUDY AS WELL.. YOU'VE INSPIRED ME TO CONTINUING LEARNING & TO USE MY "ABSTRACT THINKING" SKILLS MORE. U R AN "OUT-OF-THE-BOX" THINKER & WE APPRECIATE THAT. RESPECT & 1+ LOVE. Sis Margo-KansasCity
Thank you! Subscribe for new builds coming soon!
Exelent build. Good info on the track and wheels this could be used for many scenarios ! Just a word..bed fraims are unreliable steel, someties brittle when welding. You have several if one gives you have enough backup. Hopefully.
Really good info. Man. Thanks!!
Thanks for the tip! You're welcome! Subscribe for new builds coming soon!
A much better way to do this is the traditional Dutch method.
Have a large removable window or French doors in the gable.
Have a beam or I-beam that protrudes out the front of the building to the outside, centred above the window with a sturdy hook or eyelet.
This preserves all the floor space and lets you get big bulky or heavy items up to the attic.
A lot of Dutch houses will have a vertical line of large windows up the front of the building to allow you to get furniture to every floor very easily.
It makes thing so simpler and faster and you don't damage furniture or walls trying to get a bed or sofa or the stairs.
Thanks for sharing! Subscribe for new builds coming soon!
It seems to be easier to use that an old catapult! Good luck! 👍
Haha thanks!
You need a saw tooth locking safty feature...if the cable frays snaps etc or something happens to the wench... the ratching mechanism will lock into the Sawtooth locks mount to sides of both rails locking the elevator into place not dropping down to the ground.
Thanks for the tip! subscribe for new builds coming soon!
You are amazing, great explanation with parts required. Thanks
@@talu1999 You're welcome!
Subscribed....Thank You Sir for your time and your insight into the creative useful projects that are endeavored. I particularly enjoy your delivery & thoroughness of the most minute details & potential Murphy's Laws one may encounter if they attempt these projects. Looking forward to more R & D on your styro-foam-air-create builds. Keep up the great work you're an asset to humanity & we ALL appreciate the knowledge you are imparting to ALL of us.
Peace Brother
Thank you! New builds coming soon!
Hmmm.....what size are those wheels? Do they have a specific name when searching Lowe's (or Home Depot), and did you attach the wheels to that plate, or did it come assembled like that?
Trolley wheels for unistrut.
Subscribe for new builds coming soon!
This is what im looking for. Need to watch more about joining the unistrut channel for smoother rail. Subscribed!
Thank you!
Hot tip...buy your cable for the switch with a couple of more spare cores than you need.They tend to go faulty.(At least the industrial crane ones did)
Thanks for the tip!
You need the emergency catastrophic failure prevention braking system with the geared teeth and the multi tooth clacker Lock
Thanks for the tip!
One thing I'm not clear on. The wheels/rollers. You mentioned the top are on the outside track and the bottom is on the inside track. However they both look to be bolted to the outside of the lift frame.
Could post a couple pictures with that explanation. Thank you
We will get to that as soon as we can! Hosting a Workshop July 25 - 28th!
Love it thanks for sharing
You're welcome! Subscribe for new builds coming soon!
A little long winded
Thanks for the feedback! We are working on more concise videos coming soon!
Nice! 😎
Thanks for sharing! Subscribe for new builds coming soon!
The speed is perfect! Fantastic. 👍🏻👍🏻🇺🇸
Thanks!
Awesome! I love this
Thanks! Subscribe for new builds coming soon!
Great video! Thanks.
Thanks
You are putting a lot of faith in that cable
There is always some faith involved with an elevator ride haha! Still holding up four years later
More vids about foam plzzzz
New video with foam free recipe coming soon! Subscribe to be notified!
What happens if the cable brakes
It falls
@@colinstace1758 lol
Thanks!
Great minds discuss ideas; average minds discuss events; small minds discuss people.
Eleanor Roosevelt
beautiful!
Really well made video!
Thank you! Subscribe for new builds coming soon!
Ture diy hero 👌
Thank you! Subscribe for new tiny house build coming soon!
You have a great/sturdy lift for your shop. I don't know if I missed hearing it in the video but did you weld the super strut sections together? I imagine the joint would be weak, otherwise, and could separate, hanging up the trolley wheels as they pass through, under load. Perhaps others here on your channel may have suggested retractable safety straps (much like the mechanism in your car seat belts) that would break a fall should the winch or wire cable suddenly/unexpectedly fail. Thanks for sharing your video.
thanks for sharing! subscribe for new builds coming soon!
@@AbundanceBuild Subscribed
Is it actually legal to build this?
Build yes ..use probably not
Only illegal if you ask someone
@@colinstace1758 manslaughter if someone dies I reckon.
Depends. Working on testing for regulators. Subscribe for new builds coming soon!
ENROLL IN THE ONLINE CLASS HERE:
abundancebuild.com