Hi Javier I have a question for I own a Panasonic DMR es46 vcr but I can’t get the controller to work I tired to program it like the manual says but there is response can the vcr ir receiver be bad shall take it out build like you did and try it out with a universal controller if it responds
Thanks to your video Javier I learn how test the ir receiver and it was bad the led used it was on not the way it responds to the controller in your video and lucky I had some parts I had taken out of old vcr and set boxes and now my Panasonic DMR es46 works like brand new Javier can the ic receiver get damaged by dropping the vcr by accident I remember I was taking out from and it small drop hit the floor not a big high drop
@@JaviersDIY about that, I actually tried connecting the 5mm receiver and transmitter and it didn't work. The receiver only has two nodes so I don't know which node of the transmitter to connect to the receiver. I could really use some advise since I'm really interested. Thanks!
@@JaviersDIY okay, should I connect the transmitter node(+)(-) to the receiver node(+)(-) for it to work or is it transmitter node(+)(-) to receiver node(-)(+)?
Brod, pwede ba ito sa size AAA battery operated led bulb? Paano gawing steady yung light ng bulb? Anong specific parts ang kelangan. Thanks in advance sa reply.
If the you put a low voltage and it still heat up meaning there's a wrong connection in your circuit not just the connection but also the components you use. Thank you sir
13 years old pa ako pero nangangarap ako maka pag patent ako ng sarili kong invention keep it up
Thank you sir. Just keep on watching
magaling ka dito keep it up very creative sana all,talented and gifted.
Salamat po
I saw many videos but u gave clarity
thank you sir
Same over here, this is the real deal video
Helpful and understandable, thanks for time spend on this video.
It’s very very very very very very very very very very very very very very nice
Thank you
Ang ganda nito
I was many but this video give me success
Nice Job thanks for you
Wow ang galing
Salamat
a very good idea
Supper bro 😊❤
magaling,,smart idea and so creative the details is good,,hoping n mas ma level up mo p,,and people will notice your work,,good job well done
Salamat po
Nice project brothers👍
Thank you sir
Thank Bro,but its only tester?
Does that metal sheild must require for ir receiver?
no sir, there is a metal because sometimes the IR will becomes hot.
@@JaviersDIY Thankyou sir
galing naman po
Slamat po
Galing nmn po sir pwde na gunawa
Salamat po
beautiful
Thank you sir
Will it work If I plug it in USB slot of Speaker which doesn't have Remote facility so I can control Speaker with remote
No sir.
@@JaviersDIY Please suggest me how to use Remote With my Ubon SP70 speaker
galing naman!
Salamat pot
Keep it up and enjoy
Thank you
It work ❤❤❤❤❤❤❤❤❤
Its working thank you sir 👍👍👍
Your welcome sir
Interesting... thank you for sharing ur video
Salamat po
Magandang skill ito kahit saan mabubuhay ka thank you for sharing your idea gracias vadillo
Salamat po
@@JaviersDIY gracias como usarlo como interruptor de bombillo de una habitacion?
Ok kaayo
Salamat
Hi Javier I have a question for I own a Panasonic DMR es46 vcr but I can’t get the controller to work I tired to program it like the manual says but there is response can the vcr ir receiver be bad shall take it out build like you did and try it out with a universal controller if it responds
(But there is no response can vcr ir receiver be bad)
Try to replace the IR Receiver sir
Thanks to your video Javier I learn how test the ir receiver and it was bad the led used it was on not the way it responds to the controller in your video and lucky I had some parts I had taken out of old vcr and set boxes and now my Panasonic DMR es46 works like brand new Javier can the ic receiver get damaged by dropping the vcr by accident I remember I was taking out from and it small drop hit the floor not a big high drop
Your welcome sir.
Sir, can I use 5mm led IR receiver for this to work?
yes sir, you can
@@JaviersDIY about that, I actually tried connecting the 5mm receiver and transmitter and it didn't work. The receiver only has two nodes so I don't know which node of the transmitter to connect to the receiver. I could really use some advise since I'm really interested. Thanks!
The thing I have made is just a reciever, when it comes to transmitter, you can use any remote at home.
@@JaviersDIY okay, should I connect the transmitter node(+)(-) to the receiver node(+)(-) for it to work or is it transmitter node(+)(-) to receiver node(-)(+)?
I failed to properly asked my question. What I meant to ask was, since my 5mm receiver has no ground node, where can I connect the other wire?
Wow amazing
Unbelievable idea.keep it up bro
Salamat bro
100 % working sir
Thanks sir
It truly work
New learning today
Salamat po
Very Good...!!!
Thank you sir.
sana matutu din ako niyan
Salamat po
Heads up to you hehe super nice💕
Salamat po
Very good
Salamat po
Can trai as a controler on my light at home?
for better understanding please use the universal language
How much distance it covers?
maximum of 10 meters straight sir
How to make the light permanently on?, any video on a simple way?
You will use an ic sir.
@@JaviersDIY Do you have a video on that?
keep it up
Salamat po
I,t s 100% working🤩😍😍😘😍
Thank you sir.
You can also just use the camera in your phone to see the infra red light from (working) remotes.
Yes sir.
Como usarlo como interruptor de un bombillo en una habitacion?
for better understanding please use the universal language
interesting contents sir .keep it up
Salamat po❤️
Awesome
Salamat
as you can see the light is flickering how to make it without flicker?
Put some ic as a receiver of the signal sir
👍👍👍
Salamat
Keep it uo
Salamat
Can we do this with motor
Yes sir. But you need to put a ic or module to have a constant function.
Please, can i use S12703 ir receiver?
No sir
So which one will I use?
@@Doitbyourself Base on my research you can you use the S12703 receiver
no resistors?
Yes sir
How much volt battery
4V below sir.
🤩🤩🤩🤩🤩🤩👏👏👏👏
wow nice
Salamat lods
Nice
Slamat po
Brod, pwede ba ito sa size AAA battery operated led bulb? Paano gawing steady yung light ng bulb? Anong specific parts ang kelangan. Thanks in advance sa reply.
Need ka ng ic boss para sa signalling nyan
@@JaviersDIY anong klase ng IC sir? Pakidetalye pls.
KALA MAIT PR KYA DIKHEGA SIR
for better understanding please use the universal language
Where can be use?
It's a tester sir
infared sensor can broken
What do you mean sir?
😁😁😁😁
Slamat po
My sensor starts heating up very quickly when ever i plug it in..
Sir it depends on the power supply you put in. High input will burn the ir sensor. Just put 4-5v
@@JaviersDIYyh i used a low volt battery and it stills heat up😭
If the you put a low voltage and it still heat up meaning there's a wrong connection in your circuit not just the connection but also the components you use. Thank you sir
@@JaviersDIY ok thank you
@@trinistarboy1648 your welcome sir
Hello
6:27
My sensor heated as well I think there is a problem with this story.
You have a wrong connection sir.
The music is annoying but good job!
Quien habla español ?? Por favor
Aaaaaaaaaaaaa
for better understanding please use the universal language
Filipinoob po to
Slaamat
I need a special control or a normal control?
Normal control sir
DIAGRAM DIKHAYEN
you can follow it directly sir since it is small circuit only
Ehhh sarangan
Salamat brod
Se puede. Acer masfasil. Maldiseñado
For better understanding please use the universal language
nano é coreto e si vido
for better understanding please use the universal language
dont do dat
Very good
Thank you