Just when I think that I have a goal for my next purchase, you publish another amazing video that gets ideas floating in my mind and now I'm in doubt of what could be next 🤣. Thanks for the inspiration, and keep them coming!
Thanks for sharing this. I think most important is making sure a purchase brings you closer to making the music you love most.. I can use the channel as an excuse for lots of gear I wouldn't buy otherwise. However, I can't imagine stopping at just one case either.
The plethora of videos you have made utilizing complex oscillators is a direct reason I myself now have an obsession with them. I fell in love with the outlandish sounds they can produce. I just want to reciprocate a bit and suggest my current favorite complex oscillator, the Cubusynth Engine and its expander Exhaust. It is a fully featured 3340 based complex oscillator with a 'chaos' shift register put in the path between the 2 oscillators, which can create the most wonderful modulation. I think you should at least check it out, because I think you would REALLY like it.
I totally get your aversion to using the “wrong” panel color. I was so happy when I finished the classic Shared System and had a solid row of silver on top and a solid row of black on the bottom. Not as nice as a pure B&G but I can live with it. Except now I need to break it apart and scavenge for pieces for some variant of an X system.
Almost bought an xpo yesterday. But went for a quantizer instead cause another vco isn’t necessary. Definitely high on my wish list so probably one day.
Dear sir, what would you recommend to start learning modular synthesis today? Which software (cost friendly) and hardware? Thanks in advance for your kind response.
I would start with VCV rack (free) and see if you can get used to it. Start with a few modules (e.g. audible instruments == mutable instruments) from my Starterkit series (Maths = befaco rampage). Search youtube for 'starterkits eurorack' and work your way up. My own StarterKit series is also a good entry, but a lot more expensive to build.
Another approach would be to simply start small and with some cheapiah/used modules. I myself simply can not get into VCV Rack and am happy i started with hardware without "trying modular" with VCV rack. Disclaimer, i did have experience with max/MSP but I don't find that to be like eurorack even if it is much the same (just more technical) with patching and "VCAs" and so on.
That's definitely a good idea! It would be cool to add a WMD sequential switch. It's big, but then you could sequence all kinds of complex paths :). I'll put it on my idea list.
I so cannot deal with the sliding nuts anymore yet the panel color doesn't bother me it's all about functions and placement combos. AND NO one should ever question 2 MATHS next to each other it just works. I believe in a ratio of MATHS / case honestly at this point. ALSO this system might benefit from one less wogglebug and a SPORT Modulator instead. If you don't have at least one Sport Modulator folks your missing out.
Thanks for sharing your personal thoughts and preferences, it may help others to find the perfect case and learn about new modules that may better suit one's needs. I've never even heard of the SPORT modulator and it looks very interesting. As for two Maths, sure it works, it comes even closer to the Buchla 281 Quad Function generator. But using two Maths in a 7U 104 takes 40 HP which means you have to make choices and leave something out that may also be missed.
@@CinematicLaboratory very true about that in 2 limited rows it does take away a little opportunity away else where. You'll love the Sport Modulator in fact Topobrillo has always brought a little Buchla to eurorack.
I got a pen magnet-a tip from a Lightbath video-which helps a lot with the sliding nuts, but it’s still incredibly frustrating. A fixed rail with knurlies makes it a snap to reconfigure a case even if you have to move every module to do it.
Sure. But I covered that many times on my channel. This particular video is about building a 259 configuration, so the 'point' is different. If you're new to this channel, here's a cool video using all stereo outs: ua-cam.com/video/uWqiZA3wg8I/v-deo.htmlsi=xtsbQPrgs-dujTUn
@@CinematicLaboratory Dude love your work! My comment came off bad in a second reading and that fact you replied with this and respect, wanted to say hey thanks for being patient with a nobody on your channel!. I think my intent still stands, in that what you did was awesome perhaps what should be followed up is with how could a configuration like this manipulate the stereo field. I thought you were going with the comment you made when comparing the XPO to the DPO in that the DPO was NOT stereo and you wondered about having a stereo DPO with two XPO's - or even dual DPO's as a comparison. Still awesome work, and much respect
Just when I think that I have a goal for my next purchase, you publish another amazing video that gets ideas floating in my mind and now I'm in doubt of what could be next 🤣. Thanks for the inspiration, and keep them coming!
Thanks for sharing this. I think most important is making sure a purchase brings you closer to making the music you love most.. I can use the channel as an excuse for lots of gear I wouldn't buy otherwise. However, I can't imagine stopping at just one case either.
Another brilliant video. Your endless creativity is endlessly inspiring.
The plethora of videos you have made utilizing complex oscillators is a direct reason I myself now have an obsession with them. I fell in love with the outlandish sounds they can produce. I just want to reciprocate a bit and suggest my current favorite complex oscillator, the Cubusynth Engine and its expander Exhaust. It is a fully featured 3340 based complex oscillator with a 'chaos' shift register put in the path between the 2 oscillators, which can create the most wonderful modulation. I think you should at least check it out, because I think you would REALLY like it.
I am not sure if I should be thankful or worried, but thanks! I'll check it out!
I totally get your aversion to using the “wrong” panel color. I was so happy when I finished the classic Shared System and had a solid row of silver on top and a solid row of black on the bottom. Not as nice as a pure B&G but I can live with it. Except now I need to break it apart and scavenge for pieces for some variant of an X system.
Good to hear I am not alone here! I never understood why MakeNoise didn't go for panel replacement kits. They would have made a fortune.
Almost bought an xpo yesterday. But went for a quantizer instead cause another vco isn’t necessary. Definitely high on my wish list so probably one day.
I think a quantizer should be on everybody's list if you don't have anything close to a decent note :)
Flipping brilliant mate 👍
Thanks for checking it out!
Nice work 😊
Thanks for checking it out!
This truly IS A DUAL PRIMARY OSCILLATOR!!!
Both sides are the primary !
No modulation side here
Funny I did not make that connection in this video, where STO is 'just a helper' and a second XPO is dual primary...
Dear sir, what would you recommend to start learning modular synthesis today? Which software (cost friendly) and hardware? Thanks in advance for your kind response.
I would start with VCV rack (free) and see if you can get used to it. Start with a few modules (e.g. audible instruments == mutable instruments) from my Starterkit series (Maths = befaco rampage). Search youtube for 'starterkits eurorack' and work your way up. My own StarterKit series is also a good entry, but a lot more expensive to build.
Another approach would be to simply start small and with some cheapiah/used modules. I myself simply can not get into VCV Rack and am happy i started with hardware without "trying modular" with VCV rack. Disclaimer, i did have experience with max/MSP but I don't find that to be like eurorack even if it is much the same (just more technical) with patching and "VCAs" and so on.
I think a switch module in between as well would be cool to send the RM signal so it stayed patched
Like the actual 259 (or 261e now)
That's definitely a good idea! It would be cool to add a WMD sequential switch. It's big, but then you could sequence all kinds of complex paths :). I'll put it on my idea list.
@@CinematicLaboratorydoesn’t Befaco make a 4hp “mute” switch module ?
@@geraldgoodiii6993 Yeah, I have one!!!
I so cannot deal with the sliding nuts anymore yet the panel color doesn't bother me it's all about functions and placement combos. AND NO one should ever question 2 MATHS next to each other it just works. I believe in a ratio of MATHS / case honestly at this point.
ALSO this system might benefit from one less wogglebug and a SPORT Modulator instead. If you don't have at least one Sport Modulator folks your missing out.
Thanks for sharing your personal thoughts and preferences, it may help others to find the perfect case and learn about new modules that may better suit one's needs. I've never even heard of the SPORT modulator and it looks very interesting. As for two Maths, sure it works, it comes even closer to the Buchla 281 Quad Function generator. But using two Maths in a 7U 104 takes 40 HP which means you have to make choices and leave something out that may also be missed.
@@CinematicLaboratory very true about that in 2 limited rows it does take away a little opportunity away else where.
You'll love the Sport Modulator in fact Topobrillo has always brought a little Buchla to eurorack.
I got a pen magnet-a tip from a Lightbath video-which helps a lot with the sliding nuts, but it’s still incredibly frustrating. A fixed rail with knurlies makes it a snap to reconfigure a case even if you have to move every module to do it.
"Except God and Tony Rolando"
I didn’t see the xpo stereo output used? I mean that’s the point of an xpo
Sure. But I covered that many times on my channel. This particular video is about building a 259 configuration, so the 'point' is different. If you're new to this channel, here's a cool video using all stereo outs: ua-cam.com/video/uWqiZA3wg8I/v-deo.htmlsi=xtsbQPrgs-dujTUn
@@CinematicLaboratory Dude love your work! My comment came off bad in a second reading and that fact you replied with this and respect, wanted to say hey thanks for being patient with a nobody on your channel!. I think my intent still stands, in that what you did was awesome perhaps what should be followed up is with how could a configuration like this manipulate the stereo field. I thought you were going with the comment you made when comparing the XPO to the DPO in that the DPO was NOT stereo and you wondered about having a stereo DPO with two XPO's - or even dual DPO's as a comparison. Still awesome work, and much respect
S.trangely S.oothing C.omplexity
useless, haha!!
a hole genre based in FM xD