hey! this is like the standard of an xv250 bobber conversion, I love it.. everything looks so clean. Can you tell me more about your seat? I'm finding it so hard to find an appropriate kit. Also where did you get the shocks from? the stance is perfect. Thanks!
Thanks, the bobber seat is just a generic seat kit that I bought from ebay exactly like this: www.ebay.com/itm/Solo-Seat-Spring-Bracket-Mount-Kit-For-Harley-Honda-Sportster-Bobber-Chopper/161480591064?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 I didn't use most of the included hardware that came with the kit but made my front and back seat brackets out of a flat 1" metal bar. You can buy this from any local hardware stores. I bought mine from Home Depot. www.homedepot.com/p/Everbilt-1-in-x-36-in-Plain-Steel-Flat-Bar-with-1-4-in-Thick-801857/204225720 As for the shocks, I bought an OEM replacement Honda Rebel shock set from ebay similar to this: www.ebay.com/itm/2X-Rear-Spring-Shock-Absorbers-Suspension-For-Honda-Rebel-CMX250-CA250-1986-2014/263754446807?fits=Make%3AHonda%7CModel%3ARebel+250&hash=item3d68fd77d7%3Ag%3AOIUAAOSweYtbIG~a&_sacat=0&_nkw=Honda+Rebel+shocks&_from=R40&rt=nc&_trksid=p2380057.m570.l1313.TR1.TRC0.A0.H0.XHonda+Rebel+shocks.TRS1 You can take out the fittings on the virago shocks and reuse them with this shocks and it should fit the bike perfectly. The Rebel shocks should lower your bike around 1' , maybe 1.5", I don't remember exactly. I painted mine black with engine paint because I could not find them in black. The paint seems to still hold up well.
Hola, soy de Colombia y tengo una yamaha virago xv 250 y deseo colocarle ese tipo de exostos. Dónde los puedo conseguir? Agradezco a quien me pueda dar información.
Thanks. I could do a video on all the parts I used and where I got them if I there are enough interests. Maybe some ride videos. I haven't made any additional modification to this bike since I'm happy with it for now. I'm still planning on swapping out the stock headlamp for an LED "Daymaker" type when I find a nice reliable one. I also subscribed to your channel to see the progress on your xv250 project.
Thanks. I the seat kit is bought from eBay for around $50. It came with the mounting brackets, but did not look good when installed so I ended up making my own. As for the fender, I chopped a trailer fender bought from amazon. I just made sure that it's made out of metal and that both side is symmetrical because some are flat on one side and round on the other.
Hey I'm in guilford VT and know NH real good I'm looking for an engine and trans for a bobber I'm making out of a 5150 kikker. Similar sound to yours is what I'm aiming for. I'm going to be doing a jockey shift rigid bar bones loud with big head light springer front end and white walls. Looking for ideas or leads etc etc
I didn't do anything special with the electrical wiring. Some people might get annoyed with the LEDs signal lights flashing too fast. You can eliminate that problem by running an inline load resistor. Good luck with your build. Don't hesitate to ask if you have anymore questions.
Where’d you find that air filter? All the filters I can find seem to be drop-in filters for the housing. Would love a stand-alone exterior filter like that (also have a 1996 Virago 250)
The air filters used is an Emgo Universal 48mm air filter and a generic breather filter. If you want to run a setup similar to mine you have to do the following: Perform a left and right air pod delete. This is a very easy mod and it's not permanent. Just google "Virago 250 pod removal". There should be a good amount of written text and video info on this topic. Here is a good one: www.vstarforum.com/thread-2423.html
They are WILDEAGLE Drag Pipes for the XV250 from Webike Japan. Prices vary depending on the current exchange rate, but they were around $300 USD Total with shipping when I bought them. They took about a little over a week for shipping. japan.webike.net/products/577850.html
Ficou Top põe um paralama pequeno na frente pra não dar problema
Linda ficou parabéns 👏🏼
music to my ears
Quais as medidas desses filtros de ar você colocou amigo? Porque tem um maior e outro menor?
The large air pod is the air filter and the small one is the crank case breather.
Good choice, sound was dam hot
hey! this is like the standard of an xv250 bobber conversion, I love it.. everything looks so clean. Can you tell me more about your seat? I'm finding it so hard to find an appropriate kit. Also where did you get the shocks from? the stance is perfect. Thanks!
Thanks, the bobber seat is just a generic seat kit that I bought from ebay exactly like this:
www.ebay.com/itm/Solo-Seat-Spring-Bracket-Mount-Kit-For-Harley-Honda-Sportster-Bobber-Chopper/161480591064?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
I didn't use most of the included hardware that came with the kit but made my front and back seat brackets out of a flat 1" metal bar. You can buy this from any local hardware stores. I bought mine from Home Depot.
www.homedepot.com/p/Everbilt-1-in-x-36-in-Plain-Steel-Flat-Bar-with-1-4-in-Thick-801857/204225720
As for the shocks, I bought an OEM replacement Honda Rebel shock set from ebay similar to this:
www.ebay.com/itm/2X-Rear-Spring-Shock-Absorbers-Suspension-For-Honda-Rebel-CMX250-CA250-1986-2014/263754446807?fits=Make%3AHonda%7CModel%3ARebel+250&hash=item3d68fd77d7%3Ag%3AOIUAAOSweYtbIG~a&_sacat=0&_nkw=Honda+Rebel+shocks&_from=R40&rt=nc&_trksid=p2380057.m570.l1313.TR1.TRC0.A0.H0.XHonda+Rebel+shocks.TRS1
You can take out the fittings on the virago shocks and reuse them with this shocks and it should fit the bike perfectly. The Rebel shocks should lower your bike around 1' , maybe 1.5", I don't remember exactly. I painted mine black with engine paint because I could not find them in black. The paint seems to still hold up well.
Meu sonho🙏
Love the sound bro
Thanks! It does sound pretty good for a 250.
myvfr what is it called
Fala meu amigo. Como coloco a placa na lateral. Vc consegue me mandar um vídeo ?
Looks and sound nice!!! I'm also working on a series turning a Virago 250 into a Bobber !!
Thanks and good luck with your build.
Hola, soy de Colombia y tengo una yamaha virago xv 250 y deseo colocarle ese tipo de exostos.
Dónde los puedo conseguir?
Agradezco a quien me pueda dar información.
anymore bike videos coming? im building a xv250 myself over on my channel, I really like the sound of your bike.. I subscirbed
Thanks. I could do a video on all the parts I used and where I got them if I there are enough interests. Maybe some ride videos. I haven't made any additional modification to this bike since I'm happy with it for now. I'm still planning on swapping out the stock headlamp for an LED "Daymaker" type when I find a nice reliable one. I also subscribed to your channel to see the progress on your xv250 project.
Thanks man, and I love see any videos you post of your bike, its a sweet ride
Esse filtro esportivo quando chove da ruim e vc teve q regular o carburador ?
good sound. ... 👍
Awesome 😍
Perfect
ilove
The seat is looking good without the big gap, did you costumise it yourself? Or did you buy a kit for it ? Looking 👍
Thank you, Its just a generic bobber seat bought off Ebay. I didn't like the mounting kit that came with it so I made my own off a small metal bar.
Sweet build I have a Route 66 I’m fixing. How did you wire up your break light? It has 3 wires or just 2? Thanks.
Thanks. It's been a while, but I believed it has 3 wires.
😲👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾
awesome :)
You’re bike is sick! What year is it and where did you get the seat kit, and did you just chop the stock rear fender?
Thanks. I the seat kit is bought from eBay for around $50. It came with the mounting brackets, but did not look good when installed so I ended up making my own. As for the fender, I chopped a trailer fender bought from amazon. I just made sure that it's made out of metal and that both side is symmetrical because some are flat on one side and round on the other.
myvfr what year is bike?
It's a 2002.
myvfr is it the fender that’s like $15 and 7” wide?
Yes, the one I bought was around $16 and 7" wide, made of galvanized steel.
Hey I'm in guilford VT and know NH real good I'm looking for an engine and trans for a bobber I'm making out of a 5150 kikker. Similar sound to yours is what I'm aiming for. I'm going to be doing a jockey shift rigid bar bones loud with big head light springer front end and white walls. Looking for ideas or leads etc etc
Pocamadre 👍🏽
Quero uma hahaha Mosca Branca essa moto, difícil de achar 🤦🏻♂️
Orchestra
What handlebars are you running?
Can’t get a good shot of them in the vid...
They are Biltwell Keystone
www.biltwellinc.com/p196/buy/parts-amp-accessories/handlebars/keystone/-keystone-handlebars-7-8-quot-black/
myvfr very cool bike man! I have an 03 I want to do this to. Did you have to do anything to electrical to use led lights?
I didn't do anything special with the electrical wiring. Some people might get annoyed with the LEDs signal lights flashing too fast. You can eliminate that problem by running an inline load resistor. Good luck with your build. Don't hesitate to ask if you have anymore questions.
it would suck to have oil stained on one side of the clothing.
que suspensão traseira é essa? de qual moto é? ficou mt top!!
They are aftermarket shocks for a Honda Rebel 250.
Lmao sorry to add on but where'd u get that rear fender I'm getting one from amazon hoping to be like that jw
I think it was a trailer fender I got from amazon that I cut it in half.
Can i ask, whitch exhaust is this ?
Where’d you find that air filter? All the filters I can find seem to be drop-in filters for the housing. Would love a stand-alone exterior filter like that (also have a 1996 Virago 250)
The air filters used is an Emgo Universal 48mm air filter and a generic breather filter. If you want to run a setup similar to mine you have to do the following:
Perform a left and right air pod delete. This is a very easy mod and it's not permanent. Just google "Virago 250 pod removal". There should be a good amount of written text and video info on this topic.
Here is a good one:
www.vstarforum.com/thread-2423.html
Really appreciate it man! Been looking for this stuff thank you so much. Might throw a video up once I get some more stuff done haha
Glad to help and good luck with modding your bike.
What's this exhaust system I'm building a bobber with the same motorcycle
I got the exhaust from this website japan.webike.net/
ผมช้ลี่ฟานอยู่ครับปัญญาติดสูบเดียวนะตรับ
😮😮😮😮😮😮😮
ผมใช้อยู่ครับแต่ปัญญาติดสูบเดียวครับ
👍👍👍
✌
Hey mate, where did you get these pipes from?
They are WILDEAGLE Drag Pipes for the XV250 from Webike Japan. Prices vary depending on the current exchange rate, but they were around $300 USD Total with shipping when I bought them. They took about a little over a week for shipping.
japan.webike.net/products/577850.html
สวัสดีครับ
Hey could you tell me what pipes u used and what size the Jets were
They are WILDEAGLE Drag Pipes for the XV250 from Webike Japan. Sorry it's been a while so I forgot what size jets they are.
@@myvfr4263 ok thankyou I have a 96 xv250 and I'm thinking of getting a new exaust and rejetted
How reliable was the ship time from webbike Japan? Been thinking about ordering them, just a little worried.
Hey man what size axle bracket for the license plate holder... 1 inch?
Thanks!
It's been a while, but I'm pretty sure the one I got from ebay was 1".
What year is it
What rear springs are those
They are aftermarket springs for the old Honda Rebel 250.
Hi how did you install the air intake
I found the instructions on viragotechforum.com. It's detail and easy to follow.
what rear shocks are you using?
They are Honda Rebel shocks.
Where did you get that seat?
It's just a generic bobber set I got from Ebay.
garanti sound like a Harley
Yeah it does have a Harley potato like sound at idle.
@@myvfr4263 where i can buy this exhaust? can you give me a live please
I got the pipes from webike japan: japan.webike.net/ps/#!p.m=842&p.c=1002&p.sk=1
@@myvfr4263 thanks
Is one tube still fake?
No, they are two separate functioning pipes.
You running with baffles or nah
This is without baffles. I did at first test it with and without baffles but couldn't hear much of a difference.
What is the exhaust called
They are WILDEAGLE Drag Pipes for the XV250 from Webike Japan.
Do you rejet, thanks
Yes, I had to rejet the bike.
Any chance you're interested in selling? - Located in Burlington, VT
Thanks for the interest, but I still enjoy riding this bike so never really thought about selling it.
All good! Just started looking for one and saw you were in NH. Bike looks great!