You would not need to clean the fan blades because it is throwing out clean air from the filters, so in otherwords the dust is caught in the filter and blades will remain clean
2 роки тому+23
I guees this is where theory and practice collide. Top blades on my unit are filthy and need cleaning. And even watching this video, I still can't figure out how to remove the side panels
amazing, thank you. I was just wondering how to do it since all the surface of the machine got yellowish and planning to clean it :) p.s. I have the PRO H version but it must be very similar to this one.
If you want to clean the fan you have to disassemble the entire dehumidifier! I saw a couple of videos about it and the problem about it is those plastic pins connected to the coversthat that you have to remove will get damage after a few times of disassembling/assembling! All because of a bad design! Thanks god I watched some videos online or else I would have headache with this unit!
@@jericlee1509 Thank you for your response, small board yet it is quite expensive - I was wondering if there is an option to substitute it with something else.
@@jericlee1509 i found another video and now i know, how to open it without braking, but still waiting for a thin and long screwdriver. there is a way to open it, without braking :) theres one lock in the middle and when you push it open you have some space, to get to the other locks
Between 0:50 and 0:51 there is a massive information hole. I can unclip the bottom ones easy, but how to unclip the top ones?!? Such a Shitty Jump Cut makes this tutorial useless.
That's a ridiculous amount of effort needed to clean the fans on top... Really poor design.
You would not need to clean the fan blades because it is throwing out clean air from the filters, so in otherwords the dust is caught in the filter and blades will remain clean
I guees this is where theory and practice collide. Top blades on my unit are filthy and need cleaning. And even watching this video, I still can't figure out how to remove the side panels
@ oh yeah, you are correct.
@@sajiiides tell that to my dirty fan blades
@@freehaven-junprince2376 the new 4 series have removable top panel for cleaning
amazing, thank you. I was just wondering how to do it since all the surface of the machine got yellowish and planning to clean it :) p.s. I have the PRO H version but it must be very similar to this one.
I lost 2 clips even watching this video. I blame Mi. Thanks btw.
great to share the video, but those hard to open clip you pre open it before taking the video again making it seems so easy.
Yes I preopened some of the clips for the video
Thanks for adding this video, its very helpful in understanding design.
Thank you!
Great... perfect... what i was looking for...
Thanks
Nice job guys
If you want to clean the fan you have to disassemble the entire dehumidifier! I saw a couple of videos about it and the problem about it is those plastic pins connected to the coversthat that you have to remove will get damage after a few times of disassembling/assembling! All because of a bad design! Thanks god I watched some videos online or else I would have headache with this unit!
Is there a chance to check the D7 Diode parameters on main button board? - mine blown up for some reason :/
sir, sorry i have not encounter that problem
@@jericlee1509 Thank you for your response, small board yet it is quite expensive - I was wondering if there is an option to substitute it with something else.
Hi. 2h and 2s has the same fan ?
no idea, i only own 1 unit, cant conpare
Hi have you tried dissassembling mi air purifier 2c?
nope
At 0:51 is fake, you crash all clips. Realy bad design.
yes i crash two and reglue them
whats the problem show how to unlock keypins of side panel on the top ?
its imposible wo damage these keys (
i manage to get 1 without damage. The other one impossible to pry without breaking. this design is very poor in term of maintenability
Yes, its nearly impossible to unlock the keypins without breaking atleast 1 of them. Use superglue so that it the pin reattaches.
thank you very much thanks to your video I was able to disassemble my device because my child had put a hair clip inside
welcome
@@jericlee1509 but how you managed to open last lock on side panel without brake it ? it is very very tight
@@PaulOblomovyeah.. it sucks, i break 2 clips maybe.. and have super glue back
@@jericlee1509 i found another video and now i know, how to open it without braking, but still waiting for a thin and long screwdriver. there is a way to open it, without braking :) theres one lock in the middle and when you push it open you have some space, to get to the other locks
@@PaulOblomov great
Good
why there are 2 fans? one is for sucking the air and other one is for pushing the air?
Search how a turbine looks like and then come back here.
Нихрена непонятно как разобрал боковые стенки? Где видео то? Как ты их отщёлкнул, если со стороны вентилятора нет доступа?
Просто демонтируйте боковые стенки, сняв их. если какая-то часть сломается, приклейте ее заново.
Hi i disassemble my air purifier pro i can't assemble now
sorry its different model and i have no idea
Jajajajajajja, un clásico xddd
xie xie shushu!
hahahah pye keh chi
I regret buying this air filter. so difficult to clean.
Como se quitan los pines laterales
good work
Лучше брать версию про, там уже стоит настоящая турбина
Between 0:50 and 0:51 there is a massive information hole.
I can unclip the bottom ones easy, but how to unclip the top ones?!?
Such a Shitty Jump Cut makes this tutorial useless.
Just unclip it, if a clip breaks reglue it.
Y yo solo quiero limpiar el ventilador 😭
Lousy design. Probably new designer . Open the side panel is more difficult than opening a durian
Pano nyo ho naalis yung side?
may clip kc sides need nyo po dahan dahan...
Not possible to remove side panel. Your are cheating.. fake video
it is if you use the right amount of force. a try pushing harder
susme sumakit kamay ko buwis buhay pala pag disassemble para lang malinis ang fan nya
I can't help but notice the scar on your left arm....
sorry, broken arm since 10 yrs old
@@jericlee1509😢
The design is awful and so is this video, you make it seem as if this is a simple process when in reality it is very time consuming
sorry to hear, yes design is really awful and hard to open