Awesome video - really like the fast presentation - no wasted time. For information - this is the identical hyrdraulic cylinder on my old White / Olivier 1270
ua-cam.com/video/zgz6Ayey6QU/v-deo.html I had the same problem with the cylinder. There may be 3 possible defects but I don't know in which case the cylinder behaves like this. 1 - The control head is threaded too much or too little in the cylinder rod. 2- concave washers are not mounted correctly. 3- the gasket is broken (blue one). Before disassembling the cylinder, you must make a mark on the control head. So you know how much to screw up. The cylinder is checked with air to see if it is threaded enough. It's pretty hard for me to explain how.
@@DorelBorlea I have not had it apart it's just started doing this a mechanic that used to work for a Long Tractor dealer said to loosen the set cap and turn the cylinder one way or the other would probably straighten it up but I don't know what the set cap he's talking about
@@terryhenry4105 I don't really know how to explain it to you. I don't know technical terms but I will try. At the end of the video at 7:55 I adjust the power steering cylinder. In your case you need to screw the cylinder rod on the control head a rotation. Probably the collar on the cylinder rod came loose and the cylinder bar unscrewed a little. I'm not sure you understand what I mean.
Salut am la un u 550 același cilindru și mi se virează singur in dreapta, am schimbat garniturile am urmat pași cu reglajul stânga -dreapta și tot degeaba ce pot sa îi mai fac, mai sunt și alte reglaje? Mulțumesc anticipat.
Am urmărit cu atenție pași făcuți cu reglajele de către tine,am pus șeibile conice cum trebuie in rest totul vine de la sine nu vad unde se poate greși.Multumesc pt răspuns.
Salut ám sí eu un utb 445.cilindrul e la fel. A-n partea stángá trebuie sa trag cu 2 máini de volan. Am schimbat toate garniturile. Dar nul putem regla nici in dreapta nici in stángá. Anvárti putin de volan sí trebuie sa opresc tractorul altfel nu poti tine de volan vireaza singur.
Salut. Posibil ca pe pompa hidraulica de servo sa nu aiba capac cu supapa de suprapresiune si din cauza aceasta sa se fi defectat. Danfus nu am reparat si nu stiu sa zic care ar fi rezolvarea.
@@ioanpopa805 Pompa de servodirectie trebuie sa aiba capac cu supapa daca nu are atunci va strica danfusul. La pompa hidraulica nu este nevoie de capac cu supapa pentru ca are distribuitorul supapa de suprapresiune.
Salut Am un fiat 640 iam schimbat garniturile toate de la servo și în stânga mi se virează singur și în dreapta nu pot sa virează deloc am umblat la reglaj și când ajunge la dreapta te tot la Cap rămâne blocat, dacă opresc tractorul si dupa îl pornesc se virează normal și dacă îl dau la dreapta la Cap iar rămâne blocat ,deecate ori dau în dreapta rămâne blocat
Awesome video - really like the fast presentation - no wasted time. For information - this is the identical hyrdraulic cylinder on my old White / Olivier 1270
Glad you like my video ❤
🔝
Do you know where to get replacement rubber boots for the actuator rod?
There are factories that produce gaskets for these cylinders. But I couldn't make you a recommendation.
I have a 560 long tractor power steering is good to the right but none to the left just wondering if you could tell me what is wrong
ua-cam.com/video/zgz6Ayey6QU/v-deo.html
I had the same problem with the cylinder. There may be 3 possible defects but I don't know in which case the cylinder behaves like this. 1 - The control head is threaded too much or too little in the cylinder rod. 2- concave washers are not mounted correctly. 3- the gasket is broken (blue one). Before disassembling the cylinder, you must make a mark on the control head. So you know how much to screw up. The cylinder is checked with air to see if it is threaded enough. It's pretty hard for me to explain how.
@@DorelBorlea I have not had it apart it's just started doing this a mechanic that used to work for a Long Tractor dealer said to loosen the set cap and turn the cylinder one way or the other would probably straighten it up but I don't know what the set cap he's talking about
I have pictures of the cylinder
@@terryhenry4105 I don't really know how to explain it to you. I don't know technical terms but I will try. At the end of the video at 7:55 I adjust the power steering cylinder. In your case you need to screw the cylinder rod on the control head a rotation. Probably the collar on the cylinder rod came loose and the cylinder bar unscrewed a little. I'm not sure you understand what I mean.
@@DorelBorlea thanks I got a friend that said he thought he knew how to adjust it thanks so much
Salut am la un u 550 același cilindru și mi se virează singur in dreapta, am schimbat garniturile am urmat pași cu reglajul stânga -dreapta și tot degeaba ce pot sa îi mai fac, mai sunt și alte reglaje? Mulțumesc anticipat.
Probabil nu ai facut ceva bine. Daca totul este montat corect doar reglajul stanga dreapta trebuie facut si ar trebui sa mearga.
Am urmărit cu atenție pași făcuți cu reglajele de către tine,am pus șeibile conice cum trebuie in rest totul vine de la sine nu vad unde se poate greși.Multumesc pt răspuns.
Ok. Atunci nu ai facut corect reglajul stanga - dreapta.
Salut ám sí eu un utb 445.cilindrul e la fel. A-n partea stángá trebuie sa trag cu 2 máini de volan. Am schimbat toate garniturile. Dar nul putem regla nici in dreapta nici in stángá. Anvárti putin de volan sí trebuie sa opresc tractorul altfel nu poti tine de volan vireaza singur.
Trebuie verificat cu aer cilindrul si gasit punctul neutru. Ca sa nu mai vireze singur.
@@DorelBorlea Múltúmesc pt sfaturi!
Salut on trebare am ,un prieten șa pus danfus pe un utb 445 , și cand virează rotile la maxim face o gălăgie și ia pușcat la danfus o șaibă
Salut. Posibil ca pe pompa hidraulica de servo sa nu aiba capac cu supapa de suprapresiune si din cauza aceasta sa se fi defectat. Danfus nu am reparat si nu stiu sa zic care ar fi rezolvarea.
@@DorelBorlea păi nui pompă cu supapă așa a luato după utb șop
@@ioanpopa805 Pompa de servodirectie trebuie sa aiba capac cu supapa daca nu are atunci va strica danfusul. La pompa hidraulica nu este nevoie de capac cu supapa pentru ca are distribuitorul supapa de suprapresiune.
@@DorelBorlea mulțumesc mult👍
Salut
Am un fiat 640 iam schimbat garniturile toate de la servo și în stânga mi se virează singur și în dreapta nu pot sa virează deloc am umblat la reglaj și când ajunge la dreapta te tot la Cap rămâne blocat, dacă opresc tractorul si dupa îl pornesc se virează normal și dacă îl dau la dreapta la Cap iar rămâne blocat ,deecate ori dau în dreapta rămâne blocat
Nu este montat bine cilindrul sau reglajul nu este facut corect
@@DorelBorlea și cum fac să-l montez bine sau săi fac reglajul corect
@@razvanburcea1410 cauta pe canalul meu de youtube ca am o serie de 3 videocliouri in care prezint dezadamblarea, asamblarea si reglarea cilindrului.
@@DorelBorlea de la danfus sau ce este ala acolo ala da controlul acolo este problema
@@DorelBorlea trebuie desfăcut sau strâns acolo unde ai umblat tu
Salut un numar de tel multumesc