$800 Dirt Bike Trade Deal Starts First Kick After Getting Home (Miracle Trade)
Вставка
- Опубліковано 26 вер 2024
- I do a trade for a 2006 Kawasaki KX250F that doesn't run. #Kawasaki, #Miracle,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
► ADD ME ON ALL SOCIAL MEDIA ◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Yeah I'm afraid I'd pay $800 all day every day for a nice running bike like that. Heck of a deal. As usual great content.
yeah he's 800 into the trade bike, but it's a 500$ bike with 300$ worth of pieces and 1000$ worth of expertise and labor ahahah, im doing similar to his stuff with old dirtbike and yeah, you wouldnt get that bike for 800$ cash, all im sayin!
I almost got a mint 1985 cr125r off marketplace for $800 yesterday… just missed out was second to message and sold as I was about to leave to see it
Thanks for watching! I appreciate it!
he didnt pay 800€ the trade he did cost him 800$ but im curious what he traded he didnt tell
That bike is worth more than 800. It's worth 1,500 to 1,800 easy.
Just started watching your videos. I just want to make a point that when you’re bleeding the brakes you do not bleed the air out but leaving the bleeder screw open… every time you release the brake you’re allowing air into the system.. you need to pump and hold tension on the lever and then release bleeder and don’t let off the lever until you tighten the bleeder back up.. the front brake should not touch the grip as it still has air in the system..
I must have seen well over a hundred basket cases…laying in yards and garages…the most amazing thing about your channel? How you aren’t afraid to buy the parts needed to avoid another basket case…people have a lot of good intentions,you act out yours…keep up the content…
Thanks for watching, and for your comment! It means a lot!
Tip: An easy way to pop those oil filters out is to get a pair of needle nose, stick them in the hole, and then open them up so they press against the inside of the hole, then just pull it out.
The motorcycle gods blessed you with this bike in celebration of reaching 300,000 subscribers. Keep up the good work Joe and Vinny.
Thanks for your support, and for watching! I appreciate it!
hi vintage watching this video reminds me of my brother who passed away on his kx250f, your bikes looks the exact same as his does, i keeping thinking of him, great video and great work, love watching your vids keep it up i have learned alot and i dont even work on bikes 😂
😢Sorry for your loss. Recently reminded of a Dr. Seuss quote "Don't cry because it is over, Smile because it happened."
I am sorry to hear about your brother. Thanks so much for watching the videos! I greatly appreciate it!
I’ve got an 07 Kx250f, they definitely have an attitude when it comes to starting.
What a great deal! It’s great watching Vinny chasing behind you while you were test riding. Amazing he isn’t scared of the sounds of the bikes when you fire them up. 👍🙂
Vinnie loves to chase the machines! He is pretty fearless! Thanks for watching!
The look on your face when it started on first kick was priceless! Good for you man!
But it didn't start on the first kick🤷 he kicked it several times
never pump the brakes when the bleeder is open its just allowing it to suck air in the bleeder i open the bleeder push the brake then close the bleeder while keeping the brake in works every time or use a self bleeder
I had this same luck in 2018 when I got a 2005 Crf250r for $950. They thought it was blown, it was only one tooth off timing and I’m still riding that bike today.
my ignition and crank timing dont match up can you help?
Yup that 2006-2007 - I owned one and raced it for ears, they are rock solid aside form the crappy valves, get some Kibble White titaniums and your sorted.. From 2008 they got DFi (digital fuel injection) They were kinda janky. Nice looking machine.
Vinny needs his own segment
star of the show
🤔 Welcome to the 2Vinny channel
I would like to see Vinny going for rides.
He'd look good on a sidecar I recon 😂
@@kylereece575 Ha ha. Yes he would look good on a sidecar with a little helmet and goggles :-)
Thanks again Joe for great video! SO glad that thing started for you. ANOTHER thing: I want to personally thank you for your character, you obviously love your wife and I've never heard you use bad language, and that means a lot to me as a Christian & a pastor of a church (Boise ,ID area) My son and I have bought and rebuilt dirt bikes since he was little, and since I was a kid. So THANK YOU for putting out great, clean videos. I appreciate what you do! Keep it up.
GOBBBLESSS
Thank you for your comment! I appreciate it very much! I feel extremely blessed to be able to do what I love each day. I appreciate you watching the videos! It is great that you and your son share that hobby, and can make memories together! God bless, and have a great week!
@@2vintage The TTR125 video- so sad! Here's the GOOD news! We just bought one heavily abused and not running, got it running, discovered 2nd gear has a missing tooth- never split a TTR case before, so your video is going to help me out! Very familiar with CR & YZ250's, but never a TTR : )
Wow what size jetting is Vinny running he sure is fast, and no back fire 😜
Thanks for watching! Vinnie is extremely fast! I can hardly keep up with him!
get yourself a ultra sonic cleaner with carb cleaner in it. Some q-tips and aluminum polish work wonders on the needle and seat. You wont regret it. When you bleed brakes you either vacuum the fluid through the bleeder, or you push the lever with the bleeder open then let it up with the bleeder closed. Just pumping the brake with the bleeder open will draw air back into the caliper.
Just a quick tip , back the chain adjusters all the way into the swingarm before adjusting or taking links out of the chain , surely you could have taken more links out . Great mechanic , keep up with the vids. Watching from the UK
Just a quick tip, if you have to remove links, the chain has stretched and needs replaced.
@@AL4N.Just a quick tip , you have to remove links when you buy a new chain , duh , pay attention
@@Matthew-wn8oq you said when you buy new chain. We are talking about taking links out of old chain. Pay attention. Schmuck
Hey Joe, just wanted to say. When you removed the OIL cap for the filter, there should be a spring on the middle that holds and pushes the filter in, it appears that it was missing when you removed the cap at 16:00
Ya I seen that too I wonder if you actually need that spring
Thanks for the observation! I appreciate it! I will check it out!
Vinnie is going to be a Super Dog, and a Cardio Monster with all that running chasing those bikes and ATV's all his life. I use the Cratex rubberized abrasives on a 1/8" mandrel to clean and polish float seats. The cylindrical ones polish the barrel of the seat, and a conical one will dress where the needle fits, like lapping a valve. Those things are awesome for that kind of work. Also used for porting and polishing, with different grits. They are VERY pricey though.
Till he gets hit lol 😊then he will be flatten
Vinnie loves chasing the machines! He definitely is Super Dog! Thanks for watching!
Thanks for this comment im definitely needing those cratex!
We love it bud, very informative content. Keep em coming
Thanks for watching! I appreciate it!
Lucky for you. We got to see again what luck looks like. We viewers didn’t have to think much. Not sure I would have traded when it was said to run but didn’t. Congratulations on your knowledge.
Another good job Bud, very nice. I would have moved the axle back to zero before cutting a shorter chain though to get more chain tension option in the future.
You would think that is basic knowledge. We can all learn from each other though
Thanks for watching! I appreciate it!
My guess at 11 min. Carb clean. Valve shim. Fluids. Brake bleed. Good to go.
I might have missed it, but I'm assuming you traded the DR650 for it? That is definitely a stock silencer with just an FMF sticker on it. Hopefully, you will do another day in the life vlog, maybe show some more fishing. Thank you for the great content multiple times a week.
Thanks for watching! I greatly appreciate it!
A suggestion for getting the float needle out use air instead of needle nose. Less risk of damage
Thanks for the suggestion! I appreciate it!
@@2vintage i do a lot of these myself just not with a camera. but i enjoy watching your channel and the unique toys you find to play with
love the videos. My brother and I do the same thing, but not to the extent in which you do. One of the best tools I've invested in was a nice ultra sonic cleaner. Really helps removing crud/rust/grim from any and all parts. Also nice for those extra grimey carbs. It is a time saver for the dirty ones. Keep up the great work, you are inspiring a new gear head generation.
Thanks for watching! It is awesome that you and your brother are into fixing up machines too!
You should invest in an ultrasonic cleaner for carbs and dirty parts they save all the hassle and work really well. Good content as usual 👍👍
Thanks for watching, and thanks for the suggestion! I appreciate it!
Definitely shouldn’t pump the brakes with the bleeder open
Thanks for the suggestion!
For the float needle and seat, use toothpaste and a qtip to polish seat. Good deal man.
Here's a great tech tip I learned from watching the Mustie1 UA-cam channel. When you need to clean the float needle seat, take a Q-tip and put it in a drill. Then run it in the float needle opening with a little carb cleaner. It will polish the needle seat as it's cleaning the passage. He would cut the Q-tips in half so you'd get 2 uses out of each one. Keep up the great content. Congrats on your success and the acquisition of the new lot.
A dab of toothpaste gets 'em gleaming!
Nice now Vinny has to ride it
Mate, I truly love your videos. Real world problem solving. Gratitude from Australia!
No spark plug or compression test needed. Easy fix. Great job
Thanks for watching! I appreciate it!
picked up an 09 kx250f few months back non running. their bad for having valve troubles. had to install new valves and shims to get mine back up and running. great bikes though.
The Vin man is quick AF 😂 another great video tks Joe I've learned so much my confidence is way up
Suspension's on that thing need some love.
hope everyone has a good weekend 🏍
Great bikes I have an 09 and I have owned alot of bikes but I love this bike the most.
Great video as always
Thanks for watching! I appreciate it!
Will be much the same as the rmz250 2005
Good trade deal on that bike! Great job getting it running. This channel makes me want to start doing bikes again.
Thanks again and great content.
I really enjoy your channel I just stumbled on to it and I was intrigued with all the bikes you have worked on. I was doing old 70’s era Hondas for awhile.
Thanks for watching! I appreciate it!
Very cool bike man...awesome that it wasn't blown!. That dr 650 is my favorite tho....I want one of those to ride to work every day...
When you realize the compression release is a hot start
makes me happy to see you put the master link clip in the correct direction. i see some other channels put it the wrong way and it makes me anxious every time hahaha
How do you find these crazy good deals!!!
Little dog running as fast as he can, awesome exercise.
🤣Somebody is going to be tired tonite, not sure if it is Vinny or Joe
Vinnie is extremely fast! It is hard to keep up with him!
I always thought that a dog should be exercised constantly because that's what's good for them, same as adults. To see a dog enjoy running so much at is beautiful and if I was a little puppy dog like Vinnie I'd want to run .
Learned a lot from your content. Keep up the great work.
Thanks for watching! I appreciate it! I am glad that you enjoy it!
"It's over here"!! Hahahahaha . That dog is priceless .
definitely lucked out on this one 😂😂
Yeah I couldn't believe it haha
@@2vintage joe I have a susuki jr50 my nephews bike his dad passed away last just today is actually his b day mines tomorrow anyway the clutch or tranny is stuck in it I would love to get it fixed for him I've never worked on a dirt bike before I'm sure I could probably fix it just probably alot of moving parts in there I do more quads n minibikes n go karts stuff like that I want it done right for him something you would be interested in? Great video man
I miss the digital speed odometer, shots when testing.
Great deal and Vinny got his exercise.
Awesome show, mate. I always enjoy watching and learning greeting from Australia 🇦🇺
Thanks for watching! I greatly appreciate it!
Watching on break lol cant miss this video I have that bike
Thanks for watching! I appreciate it!
When you pulled off the oil filter cover, I didn't see a spring. There should be a spring between the cover and filter. You want to make sure it's there, it keeps the filter tight against the case, it's important. Nice bike.
Thanks for the suggestion! I appreciate it!
thank god keep the videos coming broski
Thanks for watching! I am glad that you enjoy the videos!
@@2vintage you made me feel like it isnt impossible to fix n flip bikes any advice on starting my own youtube channel man
Vinny likes the buggy man you gotta bring it back out
It is a 2008. 06 had steel frame. Clean the carberator, check camchain tension, check valve-clearens.. 👍
2006 was the first year Kawasaki had the aluminum frame for their 250f. Suzuki didn't update their 250f until 2007, and that's when I'm assuming their partnership ended.
Loving the videos, great enthusiasm, problem solving and im learning from you. A little tip though...that air noise you think is coming out is actually air going in. Bleeding brakes is not as simple as undoing the nipple and pulling the lever a few times. There is a procedure that needs to be followed and there is more than one way to skin a cat. The way I do it is, put a tube and botle over the nipple then undo the nipple and pull the lever, when you have the lever fully depressed tighten the nipple and repeat till you get a firm lever. Also tap the caliper if you are struggling to get a firm lever. but like i said my way is not the only way. Subbed!
Love when a bike can be fixed and running beautiful with basic maintenance, just shows if u look after it it’ll look after you and when u save it it’ll quite literally save your life
bro your dog is so cuteeee
Vinny!😊 Great video. Nice bike! Score.
Awesome trade my friend!!🇺🇸💫⭐️😊Hoosier Wing
first year of the bike model, pretty much the same as a 2008, not like you were ripped off =p keep up the good work, love the vids!
Thanks for watching! I appreciate it!
Vinnie loved chasing alongside the bike. Great video.
Sometimes I feel like I am chasing him, he is so fast! Thanks for watching! I appreciate it!
Just so you know, there’s supposed to be a spring on the inside of that oil filter cap to hold tension on the filter
Was that mark the right one for the back wheel being all the way forward? I don’t know, just asking 🤷🏼 nice easy fix for a change 🤣👍🏽
That red n white F sticker on the head is fastheads, so the vavles could of been replaced with stainless or titanium vavles with the correct spring for them, probably ported.
I love how vinny is as fast as the dirt bike in 1st or 2nd
Bring your tensioner all the way in and go from there. Looks like they are bout fully engaged. Great bike, great vid!
Thanks for watching! I appreciate it!
Vinny is in to it love how he chased you
He loves chasing the machines! He is a great dog!
Vinny almost had you in the race hahaha. Awesome video. Nice work.
Haha Vinnie is extremely fast! Thanks for watching! I appreciate it!
Nice find! your brake bleeding skills seem to leave a little bit to be desired (look at that air coming out! 😲 *sucks more air back in*🤣) but hey, we live and we learn.
I was thinking the same thing
Maybe a stuck float? That's a decent bike for $800. Lord knows what kind of BS is hidden inside.
i think vinny is just always judging you. he never wags his tail. lol
Vinnie has a lot of personality! He is a great dog! Thanks for watching! I appreciate it!
2-1/2 turns on the fuel screw, 50 leak jet(inside the bowl) time the ap to just miss the slide (usually all the way out on the screw) and put an o-ring around the adjustment arm and the ap lever 180 main 50 pilot will stop the bogging from idle to 1/4 throttle
The purpose of the leak jet slows down how much fuel is returned to the bowl from the ap shot if anyone didn’t know
Vinny just likes running alongside his yooman!
Vinnie is a great buddy! Thanks for watching!
Putting a hose on the bleed nipple that runs into a bottle for old brake fluid is a much cleaner way to bleed brakes and reduces the chance of getting fluid on your pads, also crack open the bleed nipple when the brake is under pressure. This makes purging air much easier.
That dog is fast! Go Vinny...😅
Vinnie is extremely fast! It is hard to keep up with him!
12:28 ayooo 👀
Best deal I ever got was a 2005 trx450r went to the guys house at like 10pm with a buddy. Guy wanted 1600 for it. Didn't run but had perfectly strong compression I couldn't believe it. I noticed the guy was drinking with his buddies and ended up getting him down to $800 bucks right hand to God. Kid that went with me said if I don't buy it he's going to lol. Of course I scooped it for 800. Never even touched it and trade it for a really nice 04 rm250 and that kid got the trx450r running good. I used to buy and sell and trade so many bikes and quads you ppl wouldn't even believe me the stories and deals I've had and seen. Traded I've done. Etc
you can also use an old float needle then you put a little valve polishing paste on the tip,
and then with a thin tube over the end of the needle and so you can clean the seat of the float needle
He's a fast little dog!
Vinny thinks it's a little ruff!😊
Had a 2008 kx450f clean bike easy to work on just lacked the top end power now on a 2008 ktm 450 exc r and now I've got to much power 😆only once I lucked out like this bought a 2000 250 ktm 2 stroke only started on starter fluid bogged out on the test ride(no fuel)bought it for a discount because it was not running got home started first kick never had a issue with it
Enjoy watching your videos, we don’t quite get the bargains you do here in the uk! Only thing that’s grates me is someone like yourself with plenty of knowledge surely knows that starting it from cold and going of like that is going to do some harm sooner or later on a 4stroke! Keep up the good work, just let them warm up abit more though😉😂
God, I absolutely HAAAAATE when you wipe shit down with those blue paper towels .. it’s literally like a nail on a chalk board for me .. I have to fast forward through the parts where you use em lol
Love the channel. Great looking bike, TRADE? Did we lose a member of the fleet?
Vinnie is pretty damn quick 😂
Vinnie is super fast for sure! It is hard to keep up with him!
Great deal, but Vinnie stole the show today. My friend 😂😅
Vinnie definitely steals the show! He is a great dog!
@2vintage I love Vinnies Personality he is a great dog infact the both of them 👍🏾🙏👏
Never seen anyone keep pumping brakes while bleeder was still open, that puts air back in system
When you bleed brakes you pump it up untill it builds pressure, hold brake in, then crack bleeder as your holding brake. Close bleeder and repeat untill no air
Nice video, you have amazing home location there. Cool bike, beautiful dog 😊
Thanks for watching! I appreciate it! We love our Vinnie! He is a great dog!
Thats pretty much the same engine as my 08 rmz250. Thanks for the content Joe, it's helped me alot.
Joe, I started watching a few of your videos and was hooked, I sub-ed right away, and I love what you do, one question I hardly see you use an ultra-sound cleaner for your carbs I would think that would be my go-to for cleaning all carbs.
this is about your skid steer=you can buy a tooth bar that bolts onto the bucket. it will make digging a lot easier.
also when you build a track DO NOT take the dirt from the track , it will leave low spots that will fill with water and make the track muddy. a good piece of advice is find a place away from the track for the extra dirt.
Love this channel, Thanks for all the great and informative content!
Damn bro I bet the guy rode it lean and it was lean pop pop popping out the exhaust like a mo-fo 😂
The welds on that exhaust looks pretty damned silly.
Vinny's cool when he's running beside.
Vinnie is extremely fast! He is a good buddy! Thanks for watching!
Great find man!! Keep it around. Great vid!