Sorry, but it's more like 20KV. The distance at which the arc can strike is about 2 cm. The fact that after it has established itself, you can separate the electrodes 4 cm is saying someling about the power, not the voltage.
👍2. Hi my friend Sergio now see your job.I have so many flybacks that I can already do something excellent with them. Thank you thousands for the ideas you give us all. Greetings and blessings !!!! That is full plasma, it should have a pleasant ozone smell. You have reached 40KVDC with cigarettes included, because they have always only reached 24KVDC. Now I will carefully watch the whole video again. Now yes, I have already seen the beginning, it is very good, with what you had done before
There are some mistakes people are doing when running a flyback transformer. The problem is that many people try to get an arc from a different pin than HV-GND which can cause the transformer to ar internally, so it gets destroyed. But nice arcs!
Sergio saludos desde venezuela. Sabes tengo un cortador de plasma y hace un arco electrico parecido no sabria decirte cuantos voltio tiene pero si se que al iniciar el equipo sin flujo de aire hace un arco similar al tuyo.que tal si pruebas con un poco de aire comprimido y lo haces pasar por este arco elctrico y quizas tengas tambien un generador de plasma .ojo no te vayas a electrocutar .éxitos
@@brzydka_i_bestia oh man...I've done that so many times haha. I use server power supplies now. They're a little tricky to get it to turn on but they're rock solid.
@@johnruscigno5738 I also tried 3D printing a high voltage bobbin and it worked to some extent until it arced internally. I need to pot it in something next time
Hello buddy, the voltage is not determined by how far you can stretch the arc, only by where it starts. try slowly bringing the electrodes together and just where they start, take measurement. (the breakdown voltage of air is around 30Kv/cm)
Sorry, but it's more like 20KV. The distance at which the arc can strike is about 2 cm. The fact that after it has established itself, you can separate the electrodes 4 cm is saying someling about the power, not the voltage.
Correct. I was wondering if anyone was going to catch that.
moreover, the warmer electrodes are - the more distance you can achieve to start the arc.
👍2. Hi my friend Sergio now see your job.I have so many flybacks that I can already do something excellent with them. Thank you thousands for the ideas you give us all. Greetings and blessings !!!! That is full plasma, it should have a pleasant ozone smell. You have reached 40KVDC with cigarettes included, because they have always only reached 24KVDC. Now I will carefully watch the whole video again. Now yes, I have already seen the beginning, it is very good, with what you had done before
You are quite an English speaker, you have to make a channel in English, I send you a big greeting
Awesome music and demonstration
You have modified that ebay 120w induction module... Can you reply or make a video what component did you used to make it better? Plz..
👍👍👍👍👍👍👍👍👏👏👏
hai friend...it heat up your zvs mosfet? or just warm
Using it like this almost does not heat
There are some mistakes people are doing when running a flyback transformer. The problem is that many people try to get an arc from a different pin than HV-GND which can cause the transformer to ar internally, so it gets destroyed. But nice arcs!
Bro how did you replace your mosfets? What mosfet did you use?
Sergio saludos desde venezuela. Sabes tengo un cortador de plasma y hace un arco electrico parecido no sabria decirte cuantos voltio tiene pero si se que al iniciar el equipo sin flujo de aire hace un arco similar al tuyo.que tal si pruebas con un poco de aire comprimido y lo haces pasar por este arco elctrico y quizas tengas tambien un generador de plasma .ojo no te vayas a electrocutar .éxitos
what kind of module did you used?
Hi James, it is a standard module, here is the video of the module so you can see it, greetings: ua-cam.com/video/QIH2feg4QXM/v-deo.html
Hello, is it possible to make a TIG welding machine using this data? Please advise me
What kind of Capacitors (?nF) you used?
Nice looking arc for just 12 volts. Have you tried building a zvs with bigger mosfets?
I ran ZVS I built off of like 30+ volts, cooked the transformer lol
@@brzydka_i_bestia oh man...I've done that so many times haha. I use server power supplies now. They're a little tricky to get it to turn on but they're rock solid.
@@johnruscigno5738 I also tried 3D printing a high voltage bobbin and it worked to some extent until it arced internally. I need to pot it in something next time
Hello, how powerful is it？Can it be used for self defense？
@@brzydka_i_bestia Hello, how powerful is it？Can it be used for self defense？
When it said on the screen that it was raining hard outside, I had a quick look outside and sure enough, it was raining hard. How did you know?
Output current?
Hello buddy, the voltage is not determined by how far you can stretch the arc, only by where it starts.
try slowly bringing the electrodes together and just where they start, take measurement.
(the breakdown voltage of air is around 30Kv/cm)
Mapkna ikan bos uji coba klo gitu doang msih kurng ykin bisa tumbang ikan
Try with focus on Transformer get some arcs
the ferite core is more like a metalized ceramic 🤔
pro tip
Music = loud and annoying.
Just do electrical science next time
Un experimento que no hare
UA-cam for the deaf.
May the Force be with you
Hall Kimberly Taylor Karen Williams Mark
What changes did you make to the zvs?