How do you adjust the can to go higher into the lid? If the lid is not sealing the way you show in the video ? Meaning when the first operation does not habe enoungh material to seal?
Possibly not enough flange material on the can, cover curl may not be long enough or too short. In a stack of lids 2" tall there should be 26 to 28 lids. Any more than 28 and you may run in to separator issues and short cover hooks. Pin height can be adjusted but going too far either way causes issues as well. If the issue is a short body hook, lifter pressure can be increased to drive more hook. Countersink depth can affect cover hook as well. There are so many different adjustments that affect each other it's hard to say without personally looking at the can flange and lid curl and running first op and second op roll seams individually to get the seam in manufacturer specs.
We should have ALL our American Distillers of Consumable alcohol switch to producing Sanitizing Solutions and packaged wipes. #q #iran #japan #denmark #russia #ukraine #qatar #. Our warm winters provide cost savings to heat then cool the Al. Spirits. Our dollar stores must Survive . Cost must go dwn 👎 #bombaysapphire #seagrams #kettleone 🙏 2024
to pass position lid chuck and rolling fix the adjust its same animation in this vidios thanks and nice tutorial
Thank you, this is easy to visualize.
thanks tutorial iknow fix and adjust roller position and chuck position 🎉🎉🎉
Me likey
How do you adjust the can to go higher into the lid? If the lid is not sealing the way you show in the video ? Meaning when the first operation does not habe enoungh material to seal?
Possibly not enough flange material on the can, cover curl may not be long enough or too short. In a stack of lids 2" tall there should be 26 to 28 lids. Any more than 28 and you may run in to separator issues and short cover hooks. Pin height can be adjusted but going too far either way causes issues as well. If the issue is a short body hook, lifter pressure can be increased to drive more hook. Countersink depth can affect cover hook as well. There are so many different adjustments that affect each other it's hard to say without personally looking at the can flange and lid curl and running first op and second op roll seams individually to get the seam in manufacturer specs.
@@imken2392 Thank you
@@imken2392 four year waiting for the answer lol thank you again
How do you adjust if the first operation does not have enough flange?
you may have insufficient footplate pressure or the seaming head may need to be lowered to increase down pressure,
Thank you
Tm
We should have ALL our American Distillers of Consumable alcohol switch to producing Sanitizing Solutions and packaged wipes. #q #iran #japan #denmark #russia #ukraine #qatar #. Our warm winters provide cost savings to heat then cool the Al. Spirits.
Our dollar stores must Survive . Cost must go dwn 👎
#bombaysapphire #seagrams #kettleone 🙏 2024
Possible WhatsApp numbre to contact