That work is First Class!! I’m sorry it didn’t get off the ground. Weight is your enemy when trying to defy gravity. It’s just too heavy. You can solve the problem I know you can. I look forward to seeing your progress on this journey. ✌️🇺🇸😎
столько вложено труда и средств, чтобы оторваться на несколько сантиметров от земли...но в любом случае наблюдать за процессом захватывающе и интересно, особенно когда сам умеешь не очень-то и многое...но вспоминаются кадры из старых кинохроник когда в начале прошлого века первые самолеты из фанеры, точно также ели отрывались от земли и падали, так что дерзайте парни, дорогу осилит идущий!
Would have been nice if this person included the link to the original builders site, appreciate the shortened copy of the build BUT a link original site would have kept me as a subscriber
Oh yes!! When I was 15 in the mid 1960’s I built a jet ski when they were unknown. My dad supplied a motor mower engine and an aluminium impeller . I formed a fibreglass pump body and got propulsion. I made the craft from plywood coated with painted calico. Results below par. Figured later father should have acquired a wrecked motorcycle. But early 1960’s we didn’t have Hondas until I bought a CB160 in 1965 and didn’t waste it on an unknown project like a jet Ski!
Amazing job. Just the weight stop you flying. You carbon fiber to build your parts. You have enough power. You just need to lose weight . Thank you for sharing
Great effort! I think you should ditch the chain and sprocket drive and replace it maybe with a hydraulic system. That way you can run a valve body which regulates the flow of fluid to each propeller, to control their respective speeds. If done right, it would probably shave off some weight too. Also, make sure to balance everything that spins! I like the modular design, however it needs to be lighter. Do you plan to do follow up videos on this? I hope you do, it's very cool!🙂👍
Not enough propellers I suggest you make another base to host six propellor. More propellers equals great lifting capacity. One concern I have is your rudder steering. Ideally you want to have mechanical actuators as well, to enable you to to have control on the pitch of the propellers. Good effort, just needs a little more thought , work and patience to make it work 🙂🙏
Центр тяжести слишком высокий. Такая схема, нуждается в механизме раздельного управления тягой каждго винта. Или нужно смещать винты выше центра тяжести.
I did have that same idea before but of a drone with a center gear running the four blades and to make it run using an vertical gas engine. But never tried it. Like the ones use for lawnmowers But a motorcycle weighs too much
Only setting was left. What means example see like rocket goes upward, pressure comes in bottom because to go up side, same u try try pressure in bottom to go upward, and one more pressure to move forward , try it sir ur machine will be successful, try again try again fail again fail better one day u will be successful
Le intenzioni sono buone, ma è tutto troppo pesante, devi studiare un pò meglio cosa abbiamo raggiunto nell'ingegneria aeronautica, altrimenti rischi di passare 50 anni a fare delle prove
It's called being inspired.... it takes a lot to do something like this I mean, most people can't even put furniture together with a 20 page step by step instructions manual...so even if it's so called "hijacked"still pure Tallent
You are correct, he took all his videos from other channels. This video he swapped to “mirror mode” so everything is backwards, possibly to prevent UA-cam from automatically issuing a copyright violation. It is possible he got permission from MEANWHILE IN THE GARAGE channel, and he did give the original creator’s channel name in the title. The other 2 replies to your comment are from people who don’t understand basic English.
If you fall off that thing, you are literally hamburger meat bro. You spent a tanks worth of gas to awkwardly "hover" an inch off the ground. Between the time you put into this thing, and the materials, including the motorcycle, you probably could have just bought a working hover bike, or at the very least put a good down payment on one. I mean, it's obvious that you have some great skills, but your execution is definitely lacking. 👎
¡¡Qué manera de desarmar tantas motos al pedo. Pensar que más de uno quiere ir al trabajo en una de esas motos, para dar de comer a su familia, y no la tiene. Y éste muchacho las deshuasa, que mundo injusto, éste, punto y aparte!!
Projeto é interessante mas poderia ter feito um ensaio em computador antes da execução, teria muitas respostas e menos trabalho braçal, em aviação o peso é um problema.
Бросайте эту идею , с цепями далеко не уедешь , да , и разница в раскрутке винтов должна быть . Работы много , трудоёмко , мозгов полно , но всё сырое .- Мне жить охото и я б не полетел !
That work is First Class!!
I’m sorry it didn’t get off the ground. Weight is your enemy when trying to defy gravity. It’s just too heavy. You can solve the problem I know you can. I look forward to seeing your progress on this journey.
✌️🇺🇸😎
Love what you're doing. Chase that dream & don't give up!
God bless your hands and mind. From Ireland
You are my Hero!!!!!!!!!
Wonderful job !!!!!!!!!!!!!
استمر واستبدل محرك اقوى واكمل المهمة دعك من المحبطين❤
Amazing fabrication skill and it didn’t self destruct. I call that a successful prototype.
Aqui do Brasil estou gostando muito do seu projeto , parabéns pela engenharia .....
Hebat kak, semangat terus sudah hampir terbang, terus disrmpurnakan semoga berhasil..amien
Excelente. Felicitaciones por el trabajo
Amazing ideas 💡❤🎉
世界に1台👍
宇宙に1台👍
मस्त यार
Wow 🤩 it worked 👍 good job. Just some more drop in weight we will see u higher up. Keep up the good work ❤
❤❤❤🎉🎉🎉
I think this the right way
Da Vinci would be proud of you . BRAVO !!!
He would be embarrassed.
It’s a start in the right direction and this guy is way smarter than me, that’s all I know.
He is excellent.
❤ухты прикольно если получится
Devolta para a mesa de projeto!
🥰🥰🥰🥰🥰👍 good job 👍😁
Thank you for watching!
Дала си дойла хьа.
столько вложено труда и средств, чтобы оторваться на несколько сантиметров от земли...но в любом случае наблюдать за процессом захватывающе и интересно, особенно когда сам умеешь не очень-то и многое...но вспоминаются кадры из старых кинохроник когда в начале прошлого века первые самолеты из фанеры, точно также ели отрывались от земли и падали, так что дерзайте парни, дорогу осилит идущий!
Shift Centre of gravity downward. then it will be more stable.
He is an artist with his hands, it is clear that he did not want to increase the revolutions of the propellers for safety.
Ubelieveable how good this thing flies....Good mechanic though.
GOOD👆👆👆
Super !
He is excellent.
We are together keep push brother
¡A ésa edad y con todo ese taller, cualquiera que sea de buena voluntad e inteligencia, puede fabricar ésa moto-drone personal!
😇😇😇
Cool leaf blower
Air Control : " He doesn't have a air space permit. "
F22 Raptor: " Say less." * Arms side winder missiles *
Very, Very talented
Bel video da vedere dal punto di vista della meccanica, ma occorre alleggerire molto la struttura.
Está listo para podar pasto
🔥
Would have been nice if this person included the link to the original builders site, appreciate the shortened copy of the build BUT a link original site would have kept me as a subscriber
Oh yes!! When I was 15 in the mid 1960’s I built a jet ski when they were unknown. My dad supplied a motor mower engine and an aluminium impeller . I formed a fibreglass pump body and got propulsion. I made the craft from plywood coated with painted calico. Results below par. Figured later father should have acquired a wrecked motorcycle. But early 1960’s we didn’t have Hondas until I bought a CB160 in 1965 and didn’t waste it on an unknown project like a jet Ski!
You are amazing, I really admire these special creations..
He should use carbon fiber, and only engine to power the propellers, and a light weight seat, overall to reduced weight
For balancing propeller need to be controlled individually all propeller running at same speed won't balance
Lawnmower 😂😂😂😅 good to cut the grass.
Не зупиняйтеся. І все вийде...🎉🎉🎉🎉
Amazing job. Just the weight stop you flying. You carbon fiber to build your parts. You have enough power. You just need to lose weight . Thank you for sharing
Thanks for the tips!
Dangerous bro
oh! He is excilent
Yes
Great effort!
I think you should ditch the chain and sprocket drive and replace it maybe with a hydraulic system.
That way you can run a valve body which regulates the flow of fluid to each propeller, to control their respective speeds.
If done right, it would probably shave off some weight too.
Also, make sure to balance everything that spins!
I like the modular design, however it needs to be lighter.
Do you plan to do follow up videos on this?
I hope you do, it's very cool!🙂👍
Looks like it needs to loose more weight......
15:44 OUCH...but its always about weight reduction and the old saying "The less moving parts you have, the less that can Go-Wrong!"
Not enough propellers
I suggest you make another base to host six propellor.
More propellers equals great lifting capacity.
One concern I have is your rudder steering.
Ideally you want to have mechanical actuators as well, to enable you to to have control on the pitch of the propellers.
Good effort, just needs a little more thought , work and patience to make it work 🙂🙏
Keng porshenli motor qo'ying va benzin yoqilg'isini kerasin yoqilg'ili motorga almashtiring
A High Powered slicer and Dicer ……!!
軽い素材で作れば、飛びそうだけどな
nice did ya get it higher then a foot jw🤔😎😎
nice job i predict a short life tho
Ai a roda bate na cabeça de uma formiga cabeçuda, a coisa vira e é fatiado pelas hélices.
было б проще, если центр тяжести снизу
啤玲用好一些 將阻力減到最細
Mars Ingenieur😅😅😅 Primitive wie dem Marsrover 🤣🤣🤣
เอาไว้เป่าฝุ่นบนถนนน่าจะดี
La parrilla tiene que cubrir las aspas si te caes quedas como carne picada
applauding the effort, but it can't really lift off safely, unless you pilot can control pitch and roll.
Looks like it could be a bit choppy going around the corners.
Capo !
🤣😂😁😆 soo funny but thanks for the effort
No problem 😊
Центр тяжести слишком высокий.
Такая схема, нуждается в механизме раздельного управления тягой каждго винта.
Или нужно смещать винты выше центра тяжести.
Я звісно не інженер але і так видно що пропелери малі для такої ваги
You need more than 1300 cc motor bike to make the fans have more speed like turbines jet power.
I did have that same idea before but of a drone with a center gear running the four blades and to make it run using an vertical gas engine.
But never tried it. Like the ones use for lawnmowers
But a motorcycle weighs too much
muito peso, tem que mudar todo projeto e usar carbono.
Kipas baling" perlu di rombak.
Milking the clock ⏰🤔
I would try four motors and giro.I invented quads.
OH. What do we learn? You need wiper
Only setting was left. What means example see like rocket goes upward, pressure comes in bottom because to go up side, same u try try pressure in bottom to go upward, and one more pressure to move forward , try it sir ur machine will be successful, try again try again fail again fail better one day u will be successful
الثقل غير موزع على كامل الجسم
Puoi tagliare l'erba 😂
Non ti ho ancora visto a fare un volo come si deve.
Столько денег и труда в эту хрень, ведь ещё с разбора моцика было понятно, что это мёртворождённый проект
Le intenzioni sono buone, ma è tutto troppo pesante, devi studiare un pò meglio cosa abbiamo raggiunto nell'ingegneria aeronautica, altrimenti rischi di passare 50 anni a fare delle prove
Its looks like you have hijacked someone else's work to try and get rich.
You don't have the talent in your entire body that he has in his pinky finger.
It's called being inspired.... it takes a lot to do something like this I mean, most people can't even put furniture together with a 20 page step by step instructions manual...so even if it's so called "hijacked"still pure Tallent
You are correct, he took all his videos from other channels. This video he swapped to “mirror mode” so everything is backwards, possibly to prevent UA-cam from automatically issuing a copyright violation. It is possible he got permission from MEANWHILE IN THE GARAGE channel, and he did give the original creator’s channel name in the title.
The other 2 replies to your comment are from people who don’t understand basic English.
Why not the other guy put everything on social media for all to see. So why no. I'll try it
If you fall off that thing, you are literally hamburger meat bro.
You spent a tanks worth of gas to awkwardly "hover" an inch off the ground. Between the time you put into this thing, and the materials, including the motorcycle, you probably could have just bought a working hover bike, or at the very least put a good down payment on one.
I mean, it's obvious that you have some great skills, but your execution is definitely lacking. 👎
He's just a biker. His bike is heavy.
sushi !!
It needs more thrust
😂😂😂😂😂😂😂मेरे यूट्यूब चैनल का नाम चितरंजन नीलम है 😂😂😂😂😂😂😂😂
over weigh ?
Full conver for sefty
pq homens morrem logo rsrs
¡¡Qué manera de desarmar tantas motos al pedo. Pensar que más de uno quiere ir al trabajo en una de esas motos, para dar de comer a su familia, y no la tiene. Y éste muchacho las deshuasa, que mundo injusto, éste, punto y aparte!!
Projeto é interessante mas poderia ter feito um ensaio em computador antes da execução, teria muitas respostas e menos trabalho braçal, em aviação o peso é um problema.
Гарна штукенція, але не зручно таскати з собою підйомний кран, який справді підніматиме цю залізяку😂!
then he fell off and was immediately sliced up by the exposed rotors.
Бросайте эту идею , с цепями далеко не уедешь , да , и разница в раскрутке винтов должна быть .
Работы много , трудоёмко , мозгов полно , но всё сырое .- Мне жить охото и я б не полетел !
Allora ! Vola ,o no!
Helicopter have no wiper
Очень опасная штука.
Make it out of plastic then it will fly lol
meat grinder !
What is this man why are you time wasted me. 🙏🕛🇵🇰
Думаю не полетело так как автор напрочь забил на культуру веса.
*💥CÓMO HACERTE CARNE MOLIDA EL MEJOR TUTORIAL!💥*