A tip from an electronics assembler: For individual lights, don't just pull the insulation off the wires. Look at how the strands split apart, you don't want that. Instead, get the insulation started slipping off, and then twist it on the wire while pulling it off, it's easy to do. This leaves the individual strands twisted together and easy to manage. Also, you can touch the LED wires to the battery wires you intend to attach them to so as to verify you are attaching them to the correct wires. You will not hurt anything by doing it wrong, and it is good to verify before you finalize the assembly, just in case. A cleaner assembly is possible if you use solder and shrink tubing, but it takes a little more effort. Once done that way the result looks cleaner and it is not easily accidentally tugged apart.
Thanks so much. I haven't done this is in years and couldn't remember how. And of course, the kit directions were no help at all. Such clear, no frill instructions. You are my hero!
@1:14 once you separate the jacket but before you remove it, rotate the jacket a few times and it will twist the wires within. It helps to prevent breaking the inner wires.
THANK YOU so much! The project I was working on gave little in the way of instruction with the lights, In fact, I had given up on ever getting it right. My miniature looks AMAZING now!
I bought this exact kit from amazon. I'm so glad I found your video because it did not come with instructions! My main concern was which of the two wires was + and you cleared it right up for me. Thanks!
The white going to the black wiring confused me because in my instructions it said white wire was positive and usually red wire is positive I was so confused for ten minutes then saw this and switched them and it worked perfectly. Thank you so much for this tutorial! I am now onto getting this house done lol
Thank you so much for this video. But c an you explain how to extend the wiring so that it works for a 3-story houser? Im building the Flever Fairy Tale Homestead.
This helped me because I didint understand what it meant but cutting the wire so the copper would show and at first it didint work so then I re did the wiring then they turned on this helped me so much thank you
After building a 1:12 scale 3-foot/3 story dollhouse with copper wire lighting I decided to build my first ever 1:24 scale miniature dollhouse by Cutebee. The kit ;has the same wire packaging with LED light strands and battery pack as you used here so I am hoping that I can get my lights to work because when I followed the instructions in the manual I got nothing! Could you consider talking the viewers through the steps next time as I am usually trying to follow the step-by-step instructions as I listen to them. Wish me luck! If I get my lights on I'm going to share this video with my Instagram followers. Thanks again!!
I’m thinking the same thing because I took the lights from a fairy light pack. But he says you have to keep trying. I think I’ll try each light with its two wires and match them to the battery back till it works. Then I’ll color code them.
Thank you for showing me this. I hope I can still find those battery boxes you used for this. I hope this method will work on my train board layout I am working on. You made this simple to follow.
Yes! I have a model that has 7 lights, 14 wires. I have another that is the same as this video. Instruction book is crap. Thanks now I can finish my two projects!
Hi! I have a very similar kit and I cut the metal that connects the white and gray wires at the top near the bulb, under the white covering. My lights don't work but I'm curious if you know how to troubleshoot this issue. I would greatly appreciate it! I had a different kit that said to cut that same part and there was another step that allowed the lights to work. I have yet to find the directions of that kit.
i just use the cable tapes that comes in the dollhouse kits. i'm sure you can substitute with masking tapes or whatever you have. the idea is just to hold the wires together.
Could we instead of using the battery box from a kit, use the original battery box that came with the fairy lights? Just trying to figure out if i can use the stuff i already have (basically just fairy lights and wire tape)
Un grand merci ! Enfin une marche à suivre pour aboutir ! Je suppose que cela est valable y compris quand on a des éclairages à des niveaux différents de la maison ? Par exemple, éclairage piscine, rez-de-chaussée, étages ? Donc plus de fils ? Bravo encore
Thanks for the tutorial! Any tips with shorter than average wires? There was extra wire included- can I graph it in between the short wires and battery box?
thanks for watching! i'm glad it helped! for me, the most i've done is probably 5 or 6, but i'm sure you can run more than that if needed. not too sure what the limit would be, but from experience, i didn't need any more than 5-6 for my miniature builds.
Owh great tutorial but can u do the obe were u need to cut it bc my light in the book says to cut 6.5cm and stuffs. Yes i alr tried urs buy it didnt work😞
What should I do if I connect he light bulb correctly yet it won't light up, and the light bulb also prevents he other light bulbs from lighting up as well if I connect them all together.
I did my wires as instructed but my problem is the lights stay on even when I turn the switch off. When on OFF the light is softer, when on ON the light is stronger... can't figure it out
Sounds like power leakage. It’s often something you won’t notice for your more power intensive lights, but when you hook up a “cheap” light like a tiny LED, it’ll stay on, only a bit softer, or it’ll flicker if the power leakage isn’t enough to power the bulb constantly. ua-cam.com/video/tzWz_guJHvY/v-deo.html This thread has some more technical details, apparently it’s often due to an incompatibility between the switch and bulb: diy.stackexchange.com/questions/81431/electrical-current-leaking-from-light-fixture-when-off
The simplest circuit to power an LED is a voltage source with a resistor and an LED in series. Such a resistor is often called a ballast resistor. The ballast resistor is used to limit the current through the LED and to prevent excess current that can burn out the LED.
I broke one of the wires that is attached to the battery box. Does anyone know where I can get another battery box with the wires or how I can fix the one I broke off of the battery box.
Hello!! I know this video was posted a long time ago but I still hope to have an answer... I tried to follow your tutorial, but my lights do not turn on.I don't understand my diagram and despite your tutorial it doesn't work...
Excellent demo. And no chat or music 👍👍 thanks. Please where do I find a battery with on /off incorporated switch like yours? So neat. Has it a name? I’ve been using a small, separate connector but it adds to the fiddle and bulk.
So glad i found your video 😍 can you also teach me how to put on the music box please, the guide book leave me with nothing except a picture of it already stick to the wall 😭 sorry English is not my first language
Thank you! I got a kit from my mom, and I'm almost finished, but these wires keep driving me crazy:(. They're probably half the gauge of the wires you're using, and they keep breaking. I've already used too much of the wire and heat-shrink tubes, so I'll have to buy more. I'll try this, but I'll more than likely just break them again.
I have the same battery box and the same color cables, but I have an extra white cable without a light on it. I think it’s for the cables that are to short to reach the battery box but I can’t seem to figure out how to use it. Do you maybe know how to fix it?
No stupid talking or music, this is about the best diy video out there.
A tip from an electronics assembler: For individual lights, don't just pull the insulation off the wires. Look at how the strands split apart, you don't want that. Instead, get the insulation started slipping off, and then twist it on the wire while pulling it off, it's easy to do. This leaves the individual strands twisted together and easy to manage.
Also, you can touch the LED wires to the battery wires you intend to attach them to so as to verify you are attaching them to the correct wires. You will not hurt anything by doing it wrong, and it is good to verify before you finalize the assembly, just in case.
A cleaner assembly is possible if you use solder and shrink tubing, but it takes a little more effort. Once done that way the result looks cleaner and it is not easily accidentally tugged apart.
OMG YOU SAVED MEEEE! I was having a hard time with the book instructions. Thank you so much 😊
Thanks so much. I haven't done this is in years and couldn't remember how. And of course, the kit directions were no help at all. Such clear, no frill instructions. You are my hero!
I took a chance looking this up after racking my brain with my 7 lights/wires - THANK YOU!!! You made it look so simple! : )
Thank you so much for the video!!! The instruction sheet was unclear and this video saved me from giving up!! ❤
@1:14 once you separate the jacket but before you remove it, rotate the jacket a few times and it will twist the wires within. It helps to prevent breaking the inner wires.
THANK YOU so much! The project I was working on gave little in the way of instruction with the lights, In fact, I had given up on ever getting it right. My miniature looks AMAZING now!
I bought this exact kit from amazon. I'm so glad I found your video because it did not come with instructions! My main concern was which of the two wires was + and you cleared it right up for me. Thanks!
Hi Gary could you post the amazon link for the kit please 😊
The white going to the black wiring confused me because in my instructions it said white wire was positive and usually red wire is positive I was so confused for ten minutes then saw this and switched them and it worked perfectly. Thank you so much for this tutorial! I am now onto getting this house done lol
yes each kit is its own so colors vary. this video is just laying out the concept.
Thank you so much for your video! The instructions in my manual were so confusing. You're a real lifesaver 😊
Is there a link for these LEDS? perfect size for what i need
THANK YOU SO MUCHHH
I had no idea how to wire everything up and it turns out its quite easy, so helpful
can you please explain how to add the extended wiring that comes in the kit?
Thank you so much for this video. But c an you explain how to extend the wiring so that it works for a 3-story houser? Im building the Flever Fairy Tale Homestead.
This helped me because I didint understand what it meant but cutting the wire so the copper would show and at first it didint work so then I re did the wiring then they turned on this helped me so much thank you
After building a 1:12 scale 3-foot/3 story dollhouse with copper wire lighting I decided to build my first ever 1:24 scale miniature dollhouse by Cutebee. The kit ;has the same wire packaging with LED light strands and battery pack as you used here so I am hoping that I can get my lights to work because when I followed the instructions in the manual I got nothing! Could you consider talking the viewers through the steps next time as I am usually trying to follow the step-by-step instructions as I listen to them. Wish me luck! If I get my lights on I'm going to share this video with my Instagram followers. Thanks again!!
THANK YOU!!!!! I was about to just not put lights in my house out then I found this!
How do you tell the difference between white and grey? Mine look exactly the same
I’m thinking the same thing because I took the lights from a fairy light pack. But he says you have to keep trying. I think I’ll try each light with its two wires and match them to the battery back till it works. Then I’ll color code them.
Thank you for showing me this. I hope I can still find those battery boxes you used for this. I hope this method will work on my train board layout I am working on. You made this simple to follow.
this saved my dollhouse, thank you so so much!!
YAY! glad it helped!
Yes! I have a model that has 7 lights, 14 wires. I have another that is the same as this video. Instruction book is crap. Thanks now I can finish my two projects!
Hi! I have a very similar kit and I cut the metal that connects the white and gray wires at the top near the bulb, under the white covering. My lights don't work but I'm curious if you know how to troubleshoot this issue. I would greatly appreciate it!
I had a different kit that said to cut that same part and there was another step that allowed the lights to work. I have yet to find the directions of that kit.
Did the prewired LEDs you are using have resistors already on them when you bought them please.
Thank you so much!!! The books don't explain this at all. Very helpful!
Thank you BUT what tape kind do you use
i just use the cable tapes that comes in the dollhouse kits. i'm sure you can substitute with masking tapes or whatever you have. the idea is just to hold the wires together.
Do I need a battery box or I can attach it directly to the batteries?
This can be used for dollhouse miniature?
Could we instead of using the battery box from a kit, use the original battery box that came with the fairy lights? Just trying to figure out if i can use the stuff i already have (basically just fairy lights and wire tape)
Thank you!!!! ❤ It worked and I feel like an electrician 😂
Thank you SO much for this video! I really needed help! :)
Excellent and super helpful video! Thank you so much.😃I really needed this!🙌🏽❤️
Wair did you get better holders with swich?
Thank you! This helped a lot. I was afraid of short circuiting something. 😅
This might be a silly question, but do I have to put the light fixtures together prior to doing the wiring? I am currently working on this.
thank you so much for the tutorial! I didn't understand sh*t when I used the paper instructions for my miniature house kit. This saved me :D
Thank you so much I was confused on the instructions.
any tips on the flower town dollhouse by Rylai? its terribly hard.
How many LEDs can we use for 1 or 2 batteries?
Un grand merci ! Enfin une marche à suivre pour aboutir ! Je suppose que cela est valable y compris quand on a des éclairages à des niveaux différents de la maison ? Par exemple, éclairage piscine, rez-de-chaussée, étages ? Donc plus de fils ?
Bravo encore
Were did you get the light from?
Do you have to cut the cable jacket?
I cut through the wire the when I attempted this before. Will this affect the way the lights work when I try this again?
Thank you! Thank you! You're a great resource!!
Where can i buy all the stuff?
I'm a newbie and this helps so much! Thank you!
Thank you, thank you, THANK YOU!!!!! You are amazing 🤩
Thank You for posting this!!!! I really needed it. 😅👍🙌
Do they get hot?
Where do you purchase those?
they come with the miniature dollhouse kits and no, it doesn't get hot because these dollhouses are simple and small
Thanks for the tutorial! Any tips with shorter than average wires? There was extra wire included- can I graph it in between the short wires and battery box?
Did anyone answer u? Or did u get it figured out? Regardless, for anyone else, Yes u can splice in extra wire. 😊
@@PADS62 thanks! I ended up splicing and it worked ❤️
@Artistbrandi
oh Yay! I'm so happy you did it! 💓
Happy Hobbying 😁❤
I’m building my first miniature model so I needed this thank you so much ahhhhh
How many lights can you add to it and can you add a switch as well?
Thank you so much, this was just spot on for me being a raw beginner. How many of those little lights (3V?) can you run from the one battery holder?
thanks for watching! i'm glad it helped! for me, the most i've done is probably 5 or 6, but i'm sure you can run more than that if needed. not too sure what the limit would be, but from experience, i didn't need any more than 5-6 for my miniature builds.
@@hawj89, thank you so much! 😃
What size of the battery? is it the AA 1.5 Volts?
We're can I purchase thease from please, 😬🥰 thank you 😊
Owh great tutorial but can u do the obe were u need to cut it bc my light in the book says to cut 6.5cm and stuffs. Yes i alr tried urs buy it didnt work😞
WOW! THANKS FOR SHARING! You make it look so SIMPLE!
Heat shrink tubing of that color would work as well.
What should I do if I connect he light bulb correctly yet it won't light up, and the light bulb also prevents he other light bulbs from lighting up as well if I connect them all together.
I did my wires as instructed but my problem is the lights stay on even when I turn the switch off. When on OFF the light is softer, when on ON the light is stronger... can't figure it out
Sounds like power leakage. It’s often something you won’t notice for your more power intensive lights, but when you hook up a “cheap” light like a tiny LED, it’ll stay on, only a bit softer, or it’ll flicker if the power leakage isn’t enough to power the bulb constantly.
ua-cam.com/video/tzWz_guJHvY/v-deo.html
This thread has some more technical details, apparently it’s often due to an incompatibility between the switch and bulb: diy.stackexchange.com/questions/81431/electrical-current-leaking-from-light-fixture-when-off
Thank you so much for the tutorial. Would you able to upload onw showing how to connect a line to the extension line provided in these kits. Thanks
Where did you get the wiring kit?
they come with the miniature diy dollhouse kits
Great tutorial! Thank you 😊
Is there any need for resistors?
The simplest circuit to power an LED is a voltage source with a resistor and an LED in series. Such a resistor is often called a ballast resistor. The ballast resistor is used to limit the current through the LED and to prevent excess current that can burn out the LED.
I broke one of the wires that is attached to the battery box. Does anyone know where I can get another battery box with the wires or how I can fix the one I broke off of the battery box.
Hello!! I know this video was posted a long time ago but I still hope to have an answer... I tried to follow your tutorial, but my lights do not turn on.I don't understand my diagram and despite your tutorial it doesn't work...
Good instructions . Thanks👍😊
Excellent demo. And no chat or music 👍👍 thanks. Please where do I find a battery with on /off incorporated switch like yours? So neat. Has it a name? I’ve been using a small, separate connector but it adds to the fiddle and bulk.
Fantastic video! They work!!!
THANK YOU SO MUCH 😍✨❤️ it helped me a lot 🥰❤️💞
Thank you it really helped me.
Thank you! Finally I get it.
So glad i found your video 😍 can you also teach me how to put on the music box please, the guide book leave me with nothing except a picture of it already stick to the wall 😭 sorry English is not my first language
Thank you! I got a kit from my mom, and I'm almost finished, but these wires keep driving me crazy:(. They're probably half the gauge of the wires you're using, and they keep breaking. I've already used too much of the wire and heat-shrink tubes, so I'll have to buy more. I'll try this, but I'll more than likely just break them again.
What strength batteries do you use?
🏍️ Actually watch the video.
Thank you so much!! It worked for me!
I have the same battery box and the same color cables, but I have an extra white cable without a light on it. I think it’s for the cables that are to short to reach the battery box but I can’t seem to figure out how to use it. Do you maybe know how to fix it?
It doesn’t work for me 😢 mine are probably defective
Thank you for a great instruction!
Mine still isn’t working
That is a Mayberry street wiring kit
Ou acheter?
Thank you so much!
Myn never worked forgot to check before I glued my project together 😢
Thank you!! I do better with video instructions than written ones.
Thank you for this !
It's not working for me
I think mine are defective...great... 😭
Its really help...tq
❤❤❤
Wow! Thank you so much!!
Thank you!
Thanks! This was very helpful.
Thank u thank u so much
Thanks..
Thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
We can her your video
Don't work!!!!