Use a Directional Antenna with ESP8266-Based Board [Tutorial]
Вставка
- Опубліковано 11 бер 2021
- Earn $$. Learn What You Need to Get Certified (90% Off): nulb.app/cwlshop
How to Fix a D1 Mini Pro for External Antenna Use
Full Tutorial: nulb.app/z6ur6
Subscribe to Null Byte: goo.gl/J6wEnH
Kody's Twitter: / kodykinzie
Cyber Weapons Lab, Episode 213
Directional antennas are a great way to put all of your Wi-Fi power in one direction, and they're useful for long distances or hunting down the source of a Wi-Fi signal. Unfortunately, using the antenna connector on the ESP8266 to add an antenna of our choice involves changing a resistor on the device. We'll show how to do this so you can add your own antenna to a D1 Mini Pro with an antenna connector!
Stand options:
Neiko: amzn.to/3ezuozi
Hi-Spec: amzn.to/38vh4rR
Ram-Pro: amzn.to/3bFC1Co
Newacalox: amzn.to/2OM1SiY
Microscope with stand option:
Jiusion: amzn.to/3teDOEu
Hot air rework stations:
Newacalox New: amzn.to/3lcp1al
Newacalox Old: amzn.to/3tcItqm
D1 Mini Pro with antenna connector:
WEMOS: amzn.to/2OT8RqA
Panel antenna used in the video:
Alfa: amzn.to/2V07RkN
To learn more, check out the article: nulb.app/z6ur6
Follow Null Byte on:
Twitter: / nullbyte
Flipboard: flip.it/3.Gf_0
Website: null-byte.com
Vimeo: vimeo.com/channels/nullbyte - Навчання та стиль
I believe you could just bridge the gap after removing the resistor.
yep its just a jumper so bridge it with solder if the resistor goes flying or dont have heatgun or something :)
Yup
Agree with you. Zero resistor is a jumper.
yep but notice there is another trace under the resistor, so straight wire might make contact on that trace if solder resist doesn't insulate it
You don't actually need the SMD resistor. It's a 0 Ohm resistor, so a small wire (or just take cut of a small piece from a LED's pin) would work just as well, or just add some more solder to bridge the connectors, since it's such a small space between them.
I've done this on two of my ESP32-CAM's.
Awesome video! If you have some flux it will help to prevent it from flying away and make it easier to re-solder the resister back in to place, also it will make the solder joint much more secure.
9:54
Correct way
Wrong way
Correct way
Remimds me the USB meme 😂😂
I like the fact he said we should be able to use the board. I also prefer the word should. If it works you are the man. If it doesn't you are covered 💪
This is awesome. I'm reinvigorated to get the yagi on this!
Kody is back
This is dope thanks for the informations
Yes Kody! Nice one.
Just buy Iron Tweezers (aka Hot Tweezers) and make all this torture in one easy move. Hot air interventions are risky especially if you have cheap gun (with no thermal regulation).
In this case you can get the job done with simple soldering iron. 000 resistors practically are jumpers/bridges. It's more easier and safer to remove it and improvise a new one by merging the solder between the pads of the new direction instead of relocate the component.
Why couldn't you just use a blob of solder to bridge the two if they're that small?
Because. Just because
Now we’re talking !
Is there a way to do something similar with a normal ESP8266 without external port? Like soldering something to the leads that form the pcb antenna or something?
The only dude on YT who blinks once every 30 minutes
Time Stamp?
Must have missed it.
must be related to zuckerturd... lol
Very interesting bro
There's a cool video that makes me think of this setup that's called "building a camera that can see Wi-Fi"
Yes, but can it see Carbon Dioxide?
i saw that on UA-cam
it's already done!
so say the 0 ohm gets blown away and is lost to the winds of time, can you use an enamel bodge wire instead?
can i know the advantages when the directional antenna was being attached to esp8266?
since this is your latest video...can you do a video on open ports attack to access the web please
Nice video 👍 👍
Can you do a video on how to get kali nethunter on phone
would there be any other way if I happen to not own a heatgun?
Cut the trace to the board's antenna then add solder to bridge the pads to the external antenna.
The heat up applied A Small amount of heat but I can see A Bit of Proton occur while camera try to focus on the subject
Awesome
wouldn't a solder bridge work (easier) instead of a 0 ohm resistor?
St that scale, even a tiny blob would cover everything on the screen.
Look at the Real Size of those resistors for Reference.
Bend a card board in "U" shape; it'll take parabola shape due to Hooke's law. Slap on some Al foil, put D1 mini at focal point, and tada, parabolic directional antenna without soldering.
the best way is find the lna pin on chip and solder directly %99 copper 58mm and thanks me latter :)
Couldn't you just scrape the solder mask off from in-between the pads and just bridge them with a blob of solder and ditch the 0R resistor altogether?
Why not cut the track to the inbuilt antenna and simply bridge the open link?
My thoughts exactly. You don't need the 0 ohm "resistor" per se, just a connected path. You could make a solder bridge, replace the "resister" with a wire, etc.
This is RF, you don't want signal reflections on a dead track.
@@RoterFruchtZwerg As this could certainly be an issue at times, then we need only to cut the lead in track twice or even cut a track within the antenna grid.
Sir if I use malware attack on victims phone then do I need to keep my kali linux ON or I lose the connection with victims phone after linux shut down....🙏
Exactly! So do you still have the connection?
It’s a 000 resistor which is 0ohms, it’s a jumper, just bridge it with solder.
dont need remove resistor only solder gap thats it :)
Now people in NASA are speaking in Football fields per hamsters language
Id have linked it with solder
Is ther any way I could find ip address of a fb account?... Can you please help me
if that resister is 0 ohm why we using it?
Pick an place machines assembling the board need something to place on there as jumpers, so 0 Ohm resistors are used. Solder-Bridges cannot be done with automatic reflow soldering.
If you do it by hand, you may just bridge it with solder. However, this may slightly change RF characteristics
the question becomes why did they put in an antenna feature that wont work unless you go though all this hassle ? and could you not order one from the comapny that already has this modification ?
I guess not the end of the world if you lost it. Use a bit of wire?
This is a soldering nightmare by the way. Even the heartbeat moves the tweezers.
Why can't Arduino just make a "-e" (for external) version of this SUPER popular chip?
Because it's not Arduino. It's EspressIF.
Awesome videos this guy reminds me of that dude from the movie little nickie lol but i want make fun of him he may hack me lol
Hey
Next Project ☆ Desoldering & Reconfiguring an Intel CPU to run Windows 8 on your IPhone!
Microscope? Hot air? You are making this too complicated. Just remove the jumper resistor and throw it out. Jumper the two points with solder.
How to hack website admin panel
Dude it was you on blockman go she scaring all the player on game because null the demon in blockman go and she leader
Pro hacking tip: buy a tweezer instead of a scizor kkkkkk
is it me or dis guy doesnt blink?
Hi my unblinking friend
🤣
@
over complicated. just twist off resistor and pull solder between pads
First..
The festive yak biosynthetically prefer because thistle aetiologically hope past a squeamish chord. glamorous, maniacal promotion
Waiting for the “first” comments