Lovely craft, and your Editor really is doing you proud!!!! Where can I get one of those?? I’m just a big procrastinator when it comes to editing. As far as the star, the skies the limit 😂. Seriously though, it really is a beautiful tree and I loved all of your choices.
Very cute! Nice call on the star switch and lights! Like the gradients of green. I think the idea is with cake, the stars long part sticks down into the cake and you have the 5 points sticking on the tip of the tree, the long piece stuck in to keep it in place.
Looks great. Love the little set of lights too. Worked really will with the tree. As for the star, I can only assume that the mould is designed for making cakes and the star could be moulded with chocolate after the cakes had cooked and then the long point could be stuck into the top cake. Or a shooting start works too lol xx
Super cute Darling, I love it!! The editor is too funny, I hope he gets a break for Christmas, be nice Wendy.....LOL!!! The lights are a great addition. I think the longer end of the star is meant to be the bottom and I like that one best!! Thanks for sharing Darling, very neat mold. -Beverly
Hi Wendy, the point of the star, the long thin piece should be attached to the top of the tree! I really like this mold, it's so cute and makes a very nice tree. Good job editor, keep it up
@@warriorempathshealingfromn5625 thankyou, do you think so? I’ll try it again. I like it aswell, it’s unusual, the editor says thankyou too. Thanks for you advice, it’s much appreciated ❤️
@@robinbrook5624 Thankyou so much, yes it is a cake mould and I should have realised but my brain was on left on my pillow that day lol, thanks for watching, it’s much appreciated ❤️
@wendysdecorium One of the things I enjoy about watching videos is the inspiration! After watching this one, I started thinking, a very dangerous thing for me. 😂 Visualize using a clear resin. Use plugs (mini plastic cups filled with something) in the middle to keep it mostly hollow. Then after it's cured drilling a hole in the top of the tree parts. Stuff fairy lights through the tree. Then use UV resin to connect the tree parts together.
Thankyou for watching and I’m glad you got something out of it😀 I did have a similar thought when I bought the mould not as detailed as your idea which sounds awesome by the way but I do love me some aquacast lol ❤️
Hi Wendy, it came out really cute. I love the little lights you got for it. This was my 1st time seeing your channel. I also believe it’s a cake tree mold. I think that’s why the star was so long. If it had been done in cake. The star would have pushed down inside of it. I like the star you used, but I think the original one would look fine if you were to make the longer piece shorter. Merry Christmas to you & your family. Have a blessed day.🙏💗🇺🇸😊
@@marybeth17 Thankyou Marybeth, yes it was a cake mould and that totally makes sense. Welcome and I’m happy you’re here, merry Christmas to you too. Thankyou again ❤️
This is absolutely gorgeous Wendy. Those lights were a perfect finishing touch👌I think because it’s a cake mould the star would normally just poke into the top of the cake . Love it Wendy ❤️
I love that mould its fab...the star however I have no clue, I think yours worked better anyway. Love the lights Love the whole darn thing! Merry Christmas to you and your family :)
The only way tge star makes sense to me is if it is a cake mold and the star is meant to be inserted in the cake. Next time you make it try putting clay in the spike to prevent resin from getting in there
Lovely craft, and your Editor really is doing you proud!!!! Where can I get one of those?? I’m just a big procrastinator when it comes to editing. As far as the star, the skies the limit 😂. Seriously though, it really is a beautiful tree and I loved all of your choices.
@@QutifulQueenCrafts thankyou muchly. I know, he’s a darling but sorry he’s one of a kind. I think I’ve given up with that star lol ❤️
Very cute! Nice call on the star switch and lights! Like the gradients of green. I think the idea is with cake, the stars long part sticks down into the cake and you have the 5 points sticking on the tip of the tree, the long piece stuck in to keep it in place.
@@twofatbirdscreative Thankyou so much. I think you’re right, It makes sense 😀
Aquacast to make up Xmas 🎄
Wonderful Wendy
Great moulds and that too in Xmas color. Green 💚😊
@@AishusCraftyKidsClub thankyou muchly ❤️
The lighted Christmas tree is sooo beautiful, Wendy 🎄💫 Thanks for sharing 😘
@@PetrasBunteGlitzerwelt Thankyou so much Petra ❤️
Looks great. Love the little set of lights too. Worked really will with the tree. As for the star, I can only assume that the mould is designed for making cakes and the star could be moulded with chocolate after the cakes had cooked and then the long point could be stuck into the top cake. Or a shooting start works too lol xx
Thankyou Diane, you’re definitely right, a few people have said the same, what can I say, I’m a numpty lol❤️
Very cute tree! That star and lights finish it off so nice!
Thankyou Sierra ❤️
That's a fabulous mold! I've never seen anything like it❤
@@AngiesArtCreations24 I haven’t either, it’s definitely unusual. Thanks for watching Angie ❤️
A very lovely Christmas tree. It's fab 😊
@@SmartyHarty why thankyou! You’re very kind ❤️
I love this tree Wendy!! The lights give it the perfect touch 💜❤️
Thankyou kristin, you’re very kind ❤️
Super cute Darling, I love it!! The editor is too funny, I hope he gets a break for Christmas, be nice Wendy.....LOL!!! The lights are a great addition. I think the longer end of the star is meant to be the bottom and I like that one best!! Thanks for sharing Darling, very neat mold. -Beverly
Thankyou Beverly, I’ll let him know what you said, lol, I think I’ve given up with the star it’s weird. I hope you’re well and thanks for watching ❤️
Thank you Beverly, I hope you're doing okay ❤
Very cute. Guess the star gets stuck in a hole you would make in the top cake because I think it is a cake mould. Great idea.
@@CobnutsandTuppence thankyou. That makes sense ❤️
Hi Wendy, the point of the star, the long thin piece should be attached to the top of the tree!
I really like this mold, it's so cute and makes a very nice tree. Good job editor, keep it up
@@warriorempathshealingfromn5625 thankyou, do you think so? I’ll try it again. I like it aswell, it’s unusual, the editor says thankyou too. Thanks for you advice, it’s much appreciated ❤️
Thank you for the kind words ❤
If it's a cake mold, a tooth pick would go through the long part of the star to hold it in place. Icing would cover the bottom part of it as well.
@@robinbrook5624 Thankyou so much, yes it is a cake mould and I should have realised but my brain was on left on my pillow that day lol, thanks for watching, it’s much appreciated ❤️
@wendysdecorium One of the things I enjoy about watching videos is the inspiration! After watching this one, I started thinking, a very dangerous thing for me. 😂 Visualize using a clear resin. Use plugs (mini plastic cups filled with something) in the middle to keep it mostly hollow. Then after it's cured drilling a hole in the top of the tree parts. Stuff fairy lights through the tree. Then use UV resin to connect the tree parts together.
Thankyou for watching and I’m glad you got something out of it😀 I did have a similar thought when I bought the mould not as detailed as your idea which sounds awesome by the way but I do love me some aquacast lol ❤️
Lovely eco Christmas tree,ms Wendy😍😍💜💜🎄🎄
Marry Christmas to you and your family 🎄🎄💜💜
Thankyou so much Sudha ❤️
Hi Wendy, it came out really cute. I love the little lights you got for it. This was my 1st time seeing your channel. I also believe it’s a cake tree mold. I think that’s why the star was so long. If it had been done in cake. The star would have pushed down inside of it. I like the star you used, but I think the original one would look fine if you were to make the longer piece shorter. Merry Christmas to you & your family. Have a blessed day.🙏💗🇺🇸😊
@@marybeth17 Thankyou Marybeth, yes it was a cake mould and that totally makes sense. Welcome and I’m happy you’re here, merry Christmas to you too. Thankyou again ❤️
Beautiful make Wendy 😊
@@NerdGoblinArtThankyou Loula ❤️
I would cut some of that long piece off the star, then glue it on.
That is quite strange😊 but it's really cute❤
@@Ali-H3444 Thankyou so much, I did think about that, it’s a good idea ❤️
This is absolutely gorgeous Wendy. Those lights were a perfect finishing touch👌I think because it’s a cake mould the star would normally just poke into the top of the cake . Love it Wendy ❤️
Thankyou Sally. Someone else has said the same about the star, I guess I’ll stick with the silver one lol ❤️
Think as its a cake mold youd be able to push the longer end of the star into the sponge cake below for stability 💚- pretty tree tho
@@c.a.chambers68 yes! I never thought of that, thankyou ❤️
Very cute
Thankyou so much Chloe ❤️
love it!
@@CustomCarvingandepoxyUK Thankyou Andy so much ❤️
Turned out beautiful ❤❤
@@LouSolCreations thankyou Johanna ❤️
@wendysdecorium 🩷
That's cute
Thankyou Mildred ❤️
I love that mould its fab...the star however I have no clue, I think yours worked better anyway. Love the lights Love the whole darn thing!
Merry Christmas to you and your family :)
@@KirnixCreationsThankyou Nikki, I think so too. I’m so glad you liked it ❤️
Oh my goodness, this is so stinking cute! I just love this little tree, Wendy.
@@ginrincreates Thankyou so much ❤️
loved it wendy and it was nice talking to your youtube friends ❤
@@talonsworld4384 Thanks Talon, I’m glad you were there ❤️
The mold was probably made for cake and that would get poked in to stay on top then
@@caroledwargolet4331 thankyou Carole, I think you’re right ❤️
I like it so much dear wendy 💖✨️
@@SandraRettich Thankyou Sandra so much ❤️
Love the tree Wendy 🌳 😍
@@JunesHouseofCrafts Thankyou so much June ❤️
Beautiful tree so twinkly ❤❤❤
@@GertCreates thanks Kell, I am rather twinkly 🤣
@wendysdecorium 😂
I like this. Too many premieres to catch the live chats.
@@BassResinator I know Tim, I’m struggling too ❤️
The only way tge star makes sense to me is if it is a cake mold and the star is meant to be inserted in the cake. Next time you make it try putting clay in the spike to prevent resin from getting in there
@@southerncountryfarm Thankyou, that’s a brilliant idea, I’ll definitely try that ❤️