Heres a clip on the truck with 295s in the rear 245s in the front lowered 5/7 and a clip of our truck club Feel free to comment and sub. Insta. 209StreetDriven
Had an 88 & a 81. The 88's body style grew on me, at 1st I really liked the square body best. Both are classics for sure, gotta love the Chevy short wides!
@@arturoochoa8 Good to hear you prefer the muscle truck look. Truck looks way harder with the wider rubber! Dont fall into the 'imma get 20's' trap. Your OBS looks tougher than all those 'precious snowflakes' GMT400s at the meet haha
I like how the body is dinged up but theirs no rust on it. It's Kinda neat in my opinion. Just, whatever you do, please, do not LS swap it. The 2nd Gen 350 EFI motor has endless customizing options unlike the 1st Gen Vortec 350. It's even worse for the late 99 to 07 327 C.I. Vortec. The 2nd Gen 350 is basically an old style 350 with a EFI bowl for a carburetor and removable emission parts. What I find hilarious and overly ironic is that It was GM's worst V8 setup ever made. It was basically GM's failed attempt at making a fuel efficient 90's V8. But, easily fixable. You can make them pump out more torque and horsepower than the Vortec's ever thought of.
@@cuenta2202 the 87-95 TBI system is really nothing more than a old style V8 block with a electronic intake system and very restricted cylinder heads and exhaust. You can do anything you want to it. As long as the parts fit the application of course. To "wake up" a TBI with minimal effort and cost. Put an aftermarket manifold-back exhaust system on it.
It’s amazing that all those truck owners know how to read a tape measure and the tires and wheels don’t stick out 5” past the body. And they all look amazing!!!
Sorry to bother you man but where did you get your fenders rolled? I have the same setup and they rub hella bad I’m from the 209 area as well what shop did you go to? Thanks!
Aye bro do you think the 275/60/15 tires and wheels will look good on my 91? I wanna make it look like a 454ss truck and it has the 275 tires and wheels on it.. should I put some chrome on the black paint or black steelies like yours?
Well bro i thunk the black would look clean muscle status but the chrome will stand out ...you wont go wrong with either or ...yea it should look clean thats what the 454ss have your right
@@arturoochoa8 Did you have a 7” flip kit or what did you do for the rear Those 295s only needed a slight fender roll ? Did you use a lift shackle with the flip or what exactly was done in back
Iv got 90s Silverado I believe on a trailer bed convert.not sure exact model but has 203-75R15 5 lug do you have any Idea largest rim tire setup I could go there’s a ton of room.
Bad ass truck man. I just picked up a 97. Looking to do a 3/5 or 4/6 on it. Just can't decide on the right tire size to make sure there's no rubbing. What's the purpose of the fender rolling? Is it hard to do?
Fender rolling, get a baseball bat put it in between ur front wheel (tire) and start rolling back n forth at an angle,to bend upward the inner lips of the fenders it's easy,I dropped G-pas old retired fieldworker obs Silverado truck and I have a 4/6 drop,had a 5/7 drop,it was too low kept bottoming out,the frame an upper A-arm were about a 2inch gap if ur gonna do freeway driving go with a 3/5 drop,for the front use a 2inch drop spindle with a 1 inch drop coil,or a 3 inch drop drop coil an stock spindle,but a 3 inch drop coil can with stock spindle can give ur front wheels that slight butterfly cambor tilt,around town,drop her 4/6,and learn the roads and slow down around bumps
Also did you have to upgrade your rotors and stuff when you did your drop? I've been told that the 88-91 reg cab 2wd's have different spindles and rotors then 92-98 reg cab 2wd and 88-98 extended cabs.
Thanks for the reply, I ended up buying them at summit they are Bart D Window Wheels and the little purple sticker comes right off to make them all black. I'm just saving up to buy the drop kit now.
245/60/15 front 295/50/15 rear both are the same exact height if you have them side by side..thats what i was looking for tho ...if i had the 295/60/15 it was going to be abit taller in height from the front
@@arturoochoa8 question?? What would I use in front if I would use 275/60 15 In the rear? I have staggered wheels 7 in front 8 in rear.. Thank you in advance.. Cheers
@@arturoochoa8 thanks for the response, but not necessarily same height just thinner or skinny on front. Not like a front runner just thinner.. Thank you in advance
Had an 88 & a 81. The 88's body style grew on me, at 1st I really liked the square body best. Both are classics for sure, gotta love the Chevy short wides!
🤤🤤🤤 in love with the looks and stance of the truck.
Bad as truck bro out of all the trucks yours is the best one theres something about your truck really stands our love it
Thanks bro appreciate it
@@arturoochoa8Was this a 5” front drop ??
I want to run the same 245/60 but need to know if it was clearing on 4” or 5” front
Looks good. These trucks rock steelies like champs!
Tell me about...steelies were like ment for them aggressive/muscle look
@@arturoochoa8 Good to hear you prefer the muscle truck look. Truck looks way harder with the wider rubber! Dont fall into the 'imma get 20's' trap. Your OBS looks tougher than all those 'precious snowflakes' GMT400s at the meet haha
Haha you said bro..tought musce look clean
What size tires are you running???
Front 245/60/15
Rear 295/50/15
Yeah, dude, that bubble look is perfect. Thanks for sharing.
I like how the body is dinged up but theirs no rust on it. It's Kinda neat in my opinion. Just, whatever you do, please, do not LS swap it. The 2nd Gen 350 EFI motor has endless customizing options unlike the 1st Gen Vortec 350. It's even worse for the late 99 to 07 327 C.I. Vortec. The 2nd Gen 350 is basically an old style 350 with a EFI bowl for a carburetor and removable emission parts. What I find hilarious and overly ironic is that It was GM's worst V8 setup ever made. It was basically GM's failed attempt at making a fuel efficient 90's V8. But, easily fixable. You can make them pump out more torque and horsepower than the Vortec's ever thought of.
Ohh i see before i put a new 350 goodwrench i was about to ls swap but i kep it as a 350 at the last minute
2nd gen efi is the tbi right how could you wake it up i have a 1991
@@cuenta2202 heads, cam, Holley sniper intake and exhaust. Wala, 300 hp and 350 torque.
@@Payne427 really? Heard the tbi dosent like cams
@@cuenta2202 the 87-95 TBI system is really nothing more than a old style V8 block with a electronic intake system and very restricted cylinder heads and exhaust. You can do anything you want to it. As long as the parts fit the application of course. To "wake up" a TBI with minimal effort and cost. Put an aftermarket manifold-back exhaust system on it.
It’s amazing that all those truck owners know how to read a tape measure and the tires and wheels don’t stick out 5” past the body. And they all look amazing!!!
That’s truck looks right that’s nice daily. Nice stance
Hey man do you know the offset and backspacing to those rims?? Bout to order rims for my truck and need to make sure I’m getting the right size.
always a square body lurkin around
nice truck, dont give up on it!
Thanks bro...no sir theres lots to come for the truck but little by little
Sorry to bother you man but where did you get your fenders rolled? I have the same setup and they rub hella bad I’m from the 209 area as well what shop did you go to? Thanks!
what is your rim size i have the same tires but i need rims i have a stock suspension 98 sierra
Aye bro do you think the 275/60/15 tires and wheels will look good on my 91? I wanna make it look like a 454ss truck and it has the 275 tires and wheels on it.. should I put some chrome on the black paint or black steelies like yours?
Well bro i thunk the black would look clean muscle status but the chrome will stand out ...you wont go wrong with either or ...yea it should look clean thats what the 454ss have your right
That Tahoe and avalanche trying to sneak in there lol
295/50r15 is just a badass tire size.
Yea there chunky!!
@@arturoochoa8 do you get any rub?
@@arturoochoa8
Did you have a 7” flip kit or what did you do for the rear
Those 295s only needed a slight fender roll ?
Did you use a lift shackle with the flip or what exactly was done in back
You my friend have one beast ass truck
Thanks bro appreciate it
Did you notice anything right away when you put that tbi spacer on?
En fin 15x10 se vería salida la llanta. Porque en estos tuyos no ? Es la medida de el rin original ahí están montadas ?
Iv got 90s Silverado I believe on a trailer bed convert.not sure exact model but has 203-75R15 5 lug do you have any Idea largest rim tire setup I could go there’s a ton of room.
So like if im low that i will tuck those 15x8s will i be good or they will rub on a obs too
Nice truck 🛻
What drop spindles on the front ?
What's your wheels size and offset? I was considering 275-295 all around in order to rotate with a 9-9.5 wide wheel.
Did you do it? I'm wondering too. If you can fit 295 on a 9 inch. I know u can fit 275 on a 9
@@kennethheadden2229 got 15x10 with -38 offset. I like it
@@kennethheadden2229 i have a 295 on a 15x8 oem 15 inch wheels
Do you think I’ll have to roll my fender with 275?
In the front yes and in the back no
..... but really depends your drop and rims too
Did you change your lower control arms to fit those wheels or do you have full turn because of the offset?
I have beltech lower control arms
Do you have the link to those control arms?
I bought those as a kit from beltech
Are those 15x8s in the rear ?
Chulada de troka bro oye una pregunta tus llantas delanteras rub al dar la vuelta?
15x10 295/50/15?? What is the et of the rims?
Thats right good choice of truck👍👍👍👍✊🔥
Thanks bro
Are those 15x8s wheels
Sick truck man
Thanks bro
Doe you have any issues with the rear tires rubbing the fenders?
No i dont but i have the fenders in the back rolled
Bad ass truck man. I just picked up a 97. Looking to do a 3/5 or 4/6 on it. Just can't decide on the right tire size to make sure there's no rubbing. What's the purpose of the fender rolling? Is it hard to do?
Fender rolling, get a baseball bat put it in between ur front wheel (tire) and start rolling back n forth at an angle,to bend upward the inner lips of the fenders it's easy,I dropped G-pas old retired fieldworker obs Silverado truck and I have a 4/6 drop,had a 5/7 drop,it was too low kept bottoming out,the frame an upper A-arm were about a 2inch gap if ur gonna do freeway driving go with a 3/5 drop,for the front use a 2inch drop spindle with a 1 inch drop coil,or a 3 inch drop drop coil an stock spindle,but a 3 inch drop coil can with stock spindle can give ur front wheels that slight butterfly cambor tilt,around town,drop her 4/6,and learn the roads and slow down around bumps
Sorry Grammer sucks,
I know it's a old video but what's your back spacing in the front and rear
I believe its 4inchs backspace on tbe rims
That shit looks sick but with a new white paint job would look even better with the tire letters as well
🤔 will see
You from the 209 area I am too lol
Will the front rims rub with the stock control arms?
Im not sure bro i got it lowered with the beltech lower control arms
Dam that sucks I got the same set up but I can’t find the Belltech control arms. I guess they don’t make them.
Burn the 295s off now lol jk keep up the progress!
😂
Do you rub the tires on bumps?
No they have the fenders rolled
@@arturoochoa8 word. Thanks man. Looks good
Truck Looks AWESOME 👍 !! what size are the wheels ? I didn't hear you say , Sorry if I missed. Thanks
Thanka bro!! They are 245/60/15
295/50/15
Yo I got these exact rims ! What’s your tire size again? Lowering mine here soon got all the shit just need the time to do it
Cool cool👍.... rear 295/50/15 and front 245/60/15
What wheels are these
What's the suspension drop
Looks great...What’s the bolt pattern on them looking for some steelies too
There 5x5 bro
🔥🔥🔥🔥
how did you do the drop without c notching the frame
U can use drop shackles,and hangars for the rear,u can do the flip kit without notching,but you'll hafta use heavy duty 4x4 or 3/4 ton leaf springs
Hey man what brand are those rims?
Also did you have to upgrade your rotors and stuff when you did your drop? I've been told that the 88-91 reg cab 2wd's have different spindles and rotors then 92-98 reg cab 2wd and 88-98 extended cabs.
No i didnt do the rotors and the spindles.. shackles.. lower control arms.. and shocks got done and cnotched..
Did you have to roll the fenders to fit those tires?
How much did you have to roll them? And what was the offset and size of rims?
@helix nebula ok got you. Trying to go 20x11 just wasn’t sure if they’ll fit or even 295s
what rims and offset ??
que marca son los rines?
What kind of lowering kits did do for the front and rear?
I got a beltech 5/7 drop
@@arturoochoa8 Thank you! I have an 89 with a 5 speed. Did you have to do the leaf spring flip in the rear?
Honestly idk i took it to the shop ..i know i did a cnotch tho
Just under bed notch or did you get a step notch and get the bed cut as well
Just the cnotch under the bed and by the axle i believe l...i think one of my old videos..before and after of the chevy i have some pictures of it...
¿¿¿how many inches are your wheels????
There 15inch
209StreetDriven ¿¿I was referring to the width of the wheel ??👀
Mybad 15x8
What’s the backspace on the rim ?
I believe 4inch bro
I want these wheels on my 2019 Silverado, let me know if you want to trade for some 24" dubs
Sorry bro but thanks
You couldn't put 15s on a 2019 cause the rotors are too big on the newer ones
What size the tires
What size rim?
15
What wheel are those ? Truck looks clean man
I believe rock crawls i bought them off Craigslist
What mods done to the engine?
Everything emission legal
Heads,shorties,cam,intake,intake manifold,throttle body spacer
Do you have a fb page
No i have an Instagram tho @209streetdriven
Do the front tires rub on the fenders
No but all the fenders are rolled tho
Traum❤❤❤❤
Now that my friend is a truck no takuache shit
Que anchor tienen los rines viejo ?
15x8
De cual troca
I like to buy kind of Jackson Mississippi I stay by church blue and white house He’s in the mailbox❤
Nice
Chingona tú troca cual kit usaste para tumbarla?
👍...es un cnotch 5/7
What are the specs on the wheels
15x8 with a 4inch back space i believe
Si quema cuhh
what are the wheels bro???
Roxk crawls pro series i believe
What wheels are those
Pro comp rock crawl 15x8
Where did you buy those wheel from
Off craigslist...but there on summit racing
@@arturoochoa8 what brand are they?
People been saying basset d ring
@@arturoochoa8 so would you mind giving me your specs like all the lowering components and the wheels with offset/backspace?
Bsckspace is 4inch ...there 15x8 ...and its beltech 5/7 cnotch ...
Where u from?
Here in the 209 area
Short bed???
Yes it is
Bro I fucking love this truck 😤 but I don’t know if those headlights you have are chrome or white 🤕
I want them
I can’t see shit with my tinted headlights
They are the stock ones white not chrome ..thanks
209StreetDriven thanks bro
what is the rim specs front and back? what backspace>?
All around 15x8 with a 4inch back space
Where did you buy the rims? I cant find 4 inch back space
Really unless there 3.75...i bought mine off craigslist the guy told me those specs
Thanks for the reply, I ended up buying them at summit they are Bart D Window Wheels and the little purple sticker comes right off to make them all black. I'm just saving up to buy the drop kit now.
What wheels are those? They’re nice!
51 series rock crawlers on summit racing, very cheap :)
@@gueroo379 and the tires and size??
Bro que árbol le pusiste tengo una 94 350 tbi y quiero ponerle un árbol mejor que el original
Uno de mazana o un nogal
XXDXDXDXDXDXD JAJAJAJ
Only 89's, other than that looks like a used Car sales Lot!!!
you should have put 295/60's on the back, to match front 60's sidewall ht.
245/60/15 front 295/50/15 rear both are the same exact height if you have them side by side..thats what i was looking for tho ...if i had the 295/60/15 it was going to be abit taller in height from the front
@@arturoochoa8 question??
What would I use in front if I would use 275/60 15
In the rear? I have staggered wheels 7 in front 8 in rear..
Thank you in advance..
Cheers
Are you trying to have them the same height as your rear ones?
Your total hieght is 28inch rear
If your trying to have the front the same height 235/70/15 ...
@@arturoochoa8 thanks for the response, but not necessarily same height just thinner or skinny on front. Not like a front runner just thinner..
Thank you in advance
are those 15inch all the way around
Yes sir they are 15x8
how much did u pay to get your fenders rolled?
100 bucks in
25 each fender
What's the specs on the rims
There 15x8 ...i think rock crawler not sure
Thanx man