Awesome job that you got that hedge trimmer running. I would have been so lost trying to work on those things. I'm completely useless when it comes to mechanics. Great video! Taylor, hope you have yourself a great night
Partner-Pioneer equipment has been around a long time. I was cleaning out an old shed for a friend last year and found an old pioneer saw I put some fresh gas in and it started and ran after sitting for years! Nice job!
I also had a chainsaw as i bought the 2 together but sold it long time ago,only reason i stopped using this was some of the blade snapped off but got a second hand one coming this week, thank you for watching and the comment 👍👍
I forget names of channels when I give them a mention, thank the lord we can add captions after Nev 🤣🤣. Stellas channel is doing well now. That was very impressive Nev, first pull! Great to see you on your channel buddy
Feeding those fuel lines through get me evertime Nev, Once she fired up ran good nice smooth idle. Wish it was a way to idle down people(JK) like you did the saw!!!!!!!!!😂😅
They are awkward but a bit editing you can make it look easy on camera 🤣, it does run good for not been used for a few years and i have just ordered a second hand cutting bar for it, thanks for watching and the comment 👍👍
LoL Nev, Renaldo should print that pic and plaster it on his wall of masterpieces!! 🤣 I heard he was trying to get The Home to put a 2-stroke engine on his wheelie chair. 😲 Poor Jason, he had to pick such a difficult name for his channel. 😛 Good work on the hedger Nev. 👍
Never thought of adding broken engine on the chair John, and you saying kerbside fined Renaldo thats why it was there and me having to push you 🤣, i totally admit it i can't pronounce Jasons channel and i do feel bad about it 😞
@@Big_Johns i was going to edit a video clip of him sitting on his zero turn then you pushing him, but his zero turns are always on the trailer or in the lock up 🤣🤣
How did you get the new fuel lines in? The lines pass through the top of the tank and act as a seal. Honestly, I am effing stumped and frustrated with it
Picking fuel pipe just a little bigger than the hole cut, cut a point on end then a small amount of oil and push through and pull with long nose pinches keeping them close to the top of the tank, they are awkward to do
Thank you for the kind shoutout Nev mate :) much appreciated buddy! Going to watch the last part of this video tonight over dinner!
Not a problem Tom,thank you for watching and the comment 👍👍
Awesome job that you got that hedge trimmer running. I would have been so lost trying to work on those things. I'm completely useless when it comes to mechanics. Great video! Taylor, hope you have yourself a great night
Thanks Jay, it's not that bad working on machines it's all about where parts go back on 😂 thanks for watching, and the comment 👍
Cheers Nev! Thanks for the shoutout. Good to see that trimmer running in the end.
Not a problem Stella, thank you for watching and the comment 👍👍
Great video Nev👍🏻 nice to see you back 👊🏻👍🏻👍🏻
Thanks Mark, there will be another video out fitting another cutting blade, thanks for watching and the comment👍👍
Great job Nev. I never saw a fuel line system like that before. Very interesting video my friend. It runs great too b🔧👍
Thank you Artie,got a second hand cutting blade coming next week for it 👍👍
Partner-Pioneer equipment has been around a long time. I was cleaning out an old shed for a friend last year and found an old pioneer saw I put some fresh gas in and it started and ran after sitting for years! Nice job!
I also had a chainsaw as i bought the 2 together but sold it long time ago,only reason i stopped using this was some of the blade snapped off but got a second hand one coming this week, thank you for watching and the comment 👍👍
No sweat. Glad to watch what you create! Have a great week !@@tinkeringtaylor3053
It was interesting watching you go through the fuel system. Great job getting it run
Thank you for watching and the comment,I was surprised when it started 😄 got a second-hand cutting blade coming this week 👍
Nice one Nev. Watched Half when you put it on and just finished it now. Runs a treat , Great video.
Thanks Niel for watching and the comment, i have just ordered another cutting blade from ebay
I forget names of channels when I give them a mention, thank the lord we can add captions after Nev 🤣🤣. Stellas channel is doing well now. That was very impressive Nev, first pull! Great to see you on your channel buddy
Thank you Steve its the pronouncing of his channel that gets me. Thanks for watching my video. I do need to start getting more videos out 👍
Nice work Nev! 💯👍🏻
thank you Bill, for watching and the comment👍
Sounds like a runner to me Nev nice job sir !
Thank you Bill, is sure is a keeper so second hand cutting blade has been ordered for it, thank you for watching and the comment
Cheers mate well done
Thank you for watching and the comment Henry 👍
Well thanks for the mention nev and renoldo sent ya some artwork how nice. She sounds great now. Cheers
Thank you for Watching and the comment Jason, pleasure in doing a shout out for you👍
My artwork has traveled the seas!!!!!!✔️💯⛵
@@bigsonslawncare it sure has
Too bad it didn't stay somewhere on the ocean floor on the way over. 🤣🤣
@@Big_Johns JOHN KLEM🤐🤪
Feeding those fuel lines through get me evertime Nev, Once she fired up ran good nice smooth idle. Wish it was a way to idle down people(JK) like you did the saw!!!!!!!!!😂😅
🤣 Not a chance, I’m on full throttle buddy!!! 👍🏼
They are awkward but a bit editing you can make it look easy on camera 🤣, it does run good for not been used for a few years and i have just ordered a second hand cutting bar for it, thanks for watching and the comment 👍👍
you definitely are John 🤣
🤣👍🤣
@@tinkeringtaylor3053Nev don't stoke the 🔥🚒
LoL Nev, Renaldo should print that pic and plaster it on his wall of masterpieces!! 🤣
I heard he was trying to get The Home to put a 2-stroke engine on his wheelie chair. 😲
Poor Jason, he had to pick such a difficult name for his channel. 😛
Good work on the hedger Nev. 👍
Never thought of adding broken engine on the chair John, and you saying kerbside fined Renaldo thats why it was there and me having to push you 🤣, i totally admit it i can't pronounce Jasons channel and i do feel bad about it 😞
Well at least you added the broken rider in the chair. 🤣🤣
Now you know why I only say HR or Jason, the other confuses my mouth too. 🤣👍
@@Big_Johns i was going to edit a video clip of him sitting on his zero turn then you pushing him, but his zero turns are always on the trailer or in the lock up 🤣🤣
@@tinkeringtaylor3053NEV!!!!!!!!!!!!!!!!!!!!!!
Very true Nev, it's pretty hard to find a video of one of his mowers in action. 🤣🤣
How did you get the new fuel lines in? The lines pass through the top of the tank and act as a seal. Honestly, I am effing stumped and frustrated with it
Picking fuel pipe just a little bigger than the hole cut, cut a point on end then a small amount of oil and push through and pull with long nose pinches keeping them close to the top of the tank, they are awkward to do
@@tinkeringtaylor3053Good man you are! I got it in. Thanks a million
@@thurtletoncrackwinnet1779 Good to hear 👍
Cant watch this video, i can watch anything else but not this video? check back later
🤔🤔
😂😂😂