1970 Nova DSE Tubs Done!
Вставка
- Опубліковано 22 сер 2024
- Detroit Speed Mini Tubs Done, Quick Performance 9" Done! Latest update on the 1970 Nova Restomod Project.
Parts Used in this build;
Detroit Speed Mini Tubs
Quick Performance 9", 35 spline QP axles, Yukon Nodular Center Section, 3.89:1 gears, Eaton locker
Wilwood Dynalite 4-piston rear kit, 12.19" rotors with parking brake kit
American Racing Torq Thrust II 17" x 11" 6" backspace wheels
Nitto NT555 G2 315/35/ZR17 Tires
Ridetech 4-Link with double adjust bars
3M Rubberized Undercoating, 4 16oz cans used
@detroitspeed @Quickperformance @ridetechtv
![Дон ДОН, Алаудинов и СБЕЖАВШИЕ из под Курска ахматовцы 😁 [Пародия]](http://i.ytimg.com/vi/dEfCf5IK26Q/mqdefault.jpg)
Ray - Nicely done - as usual . -- Jim
Thanks Jim!
Really squared away shop. Nice work
Many Thanks!!!
Nice Ray🎃
Thanks Bud!
I hope you phosphoric acid washed before undercoating. I have heard of issues with previous rust continuing under the undercoat if you don’t chemically kill the rust first,
I did not, the car has no rust. It lived in a very dry climate and looks garage kept. Thanks for the heads up buddy!
That is one good looking ass end
Many Thanks!!!
Enjoyed…KOKO
Thanks Buddy! 👍👌👊
Always a clean job! Thats the “Real Rays Garage” way!❤️
Nice!!!
Thanks Man!
GREAT LOOKING CAR
Ray, great looking Nova so far. I'm looking forward to seeing it to completion.
Thanks Brother! 👍👊
Sweet....WE WI
L ROCK YOU...😁
lookin sweet Ray, great project series mate.
Looks amazing!! Nice work!!
Hello Ray,
Super good progress... Well done...
Take care.
Paul,,
Many thanks Paul!
Thats turning out nice.
Ray, it’s really coming along. Looks great with the wheels on it. Have a great day.
Looking great Ray! 👍🏻👍🏻
Excellent work and specs Ray, this 3.89 rear will be perfect for you. Good to 1500 hp LOL. The only thing you can't pass will be a gas station, going to be great
Great Job! I'm real close to committing to buying a Nova again. :)
Very nice Ray, Looking great
Thanks Buddy!
Thank you for sharing. Very nice.
Great video Cuzz, car is coming along awesome!!!
apparently, Novas did not sell well in Mexico or other spanish speaking countries since the name no-va roughly means no going or not going!
Looks fantastic, what’s the wheel set up? Rim size/off set and tire size. About to be starting a 73 Ventura project that I’ve been sitting on for almost 6 months and if I can get it looking anything close to your figment I would be ecstatic.
After installing the DSE mini tubs you should end up with 14" width of clearance and plenty of inside height clearance. I had my Quick performance 9" cut to 56" mounting surface to mounting surface. My wheels are custom American racing Torq Thrust II's 18" x 11" with 6" Backspace. Tires are Nitto NT555 G2's 315/40ZR18 and have about 5/8" side to side clearance. The tire is 28" in diameter and have 2" front and rear clearance. I could fit a 30" diameter tire but it would be tight but doable! You will love the look when finished and worth the work involved!
Nice work. I sent you an email re some work. Chat soon Ray
Ray, it looks like your tires would have fit without nothing the frame rails? Is that the case?
No, for the tubs to fit the frame rails need to be narrowed in the rear to fit, tubs are 14” wide. My tires are 13” wide.
@@RaysGarage thanks ray! Appreciate all the help.
Ray I am doing basically the same build. Expect doing a speedrech toque arm set up. My question is. Did you narrow the rear end. If so how did you come up with the measurement. I’m running the same size tire 315’s
Yes, narrowed the rear axle. The rear axle with Wilwood rotors is 56" from mounting surface to mounting surface. My rear 18"x11" wheels have a 6" back space and are perfectly centered in the tubs with .625" clearance inside and out. So depending on your wheels backspace will determine your overall width.
👍👍😎👍👍
👍👊
You need a mini split ac/heat pump Ray, especially living in the desert. Hard to compare with the sweet 9 inch rear end, 4 link and mini tubs. Priorities. 😅
PS…the Rust Jones is hanging low these days. 😂
I agree, Mr. Cool agreed to provide a system then backed out for some unknown reason, maybe it was the Trump flag or the Let's go Brandon signs! Regardless, I'll put a system in at some point. Mr Cool should step up and follow up with our agreement, if not so be it!
Nice build! What is the backspace/offset of your 315/35?
I ended up going with 315/40ZR18’s on 18x11’s with 6” backspace the 315/40’s filled the wheel tubs much better. The 9” is 56” mounting surface to mounting surface with the Wilwood rotors.
@@RaysGarage I appreciate that I have the same setup you just confirmed my measurements
What you got price related without labor in the tubs axle and 4 link wanting to do this to my nova
Hi Charles, The Detroit Speed tubs are about $500, Quick Performance 9" rear axle was about $2800 complete, the Ridetech rear cradle with double adjust bars and weld on brackets ran about $2000
What is your shortened axle length?
With Wilwood rotors installed, mounting surface to mounting surface is 56" and running a 18x11 wheel with 6" BS.
What are going with for engine and trans?
Blueprint 496 BBC Stroker with a Hughes Performance 4L80E, 3000 stall 11” billet converter.
ua-cam.com/video/Ans62jYjN00/v-deo.htmlsi=Z-DsSjfwpxk73drS