ILO configuration
Вставка
- Опубліковано 4 жов 2024
- How to configure the hp ILO and a brief walk through the ILO web GUI
-----------------------------------------------------------------------------------------------------------
sponsor: www.computelab...
Servers: Hp dl380 g6
Ethernet switch: NETGEAR fs728tp
server rack: 18U 4 Post Open Frame 19" Network Server Rack Cabinet Adjustable Depth 24"-37"
KVM: ATEN Altusen KL1508AM
Thank you! We bought an HP DL360 G6. Your video is so nice, simple, and intuitive, and your voice is also very nice.
I can't thank you enough. I purchased a hp proliant dl380 g6 a month ago from ebay for $80 and I couldn't for the life of me gain access to the ilo system
Thank you so much!
I was struggling for hours before I saw this. Can express how much this has helped!
Thank you! Just bought a cheap DL180 G6 and gathering beforehand information, this video was very useful :)
I'm so happy that I could help :)
Excellent. Calm informative simply good tut. Thank you
Thank you so much for the video. It helped me a lot. Good luck in your endeavors. With love from Russia.
Thank you so much. This helped me a lot!
Thanks a lot, i'm glad I could help you!
Thank you for showing this. You Rock!!!
GREAT VIDEO JUST 1 MINOR POINT A VPN IS NOT THE SAME AS OPEN PORTS.
THERE ARE 3 WAYS TO ACCESS ILO FROM WAN - OPEN PORTS FORWARDED, GIVING IT A PUBLIC IP OR AS YOU SAID SETTING UP A VPN.
WITH THE VPN BEING THE RECOMMENDED MOST SECURE METHOD.
ILO ON LAN DOESN'T MAKE MUCH SENSE AS YOU CAN JUST PUSH THE POWER BUTTON. THE ONLY REASON FOR ILO IS BECAUSE SOMETIMES A SERVER BECOMES UNRESPONSIVE WITHIN IT'S OS AND MUST BE PHYSICALLY REBOOTED. IF YOUR I.T. DEPARTMENT/COMPANY ARE NOT ONSITE THEN THEY NEED TO BE ABLE TO REMOTELY REBOOT THE SERVER AND GAIN LOW LEVEL ACCESS TO THE HARDWARE. SO ALTHOUGH LESS IT DOES PING MONITORING INFORMATION ON THE STATUS OF THE HARDWARE, WHEN YOU DIAL ONTO THE ILO IT'S ALMOST ALWAYS TO DO A REMOTE PHYSICAL REBOOT OF A FROZEN SERVER.
BUT GREAT VIDEO AS I SAY THIS IS ONLY A MINOR POINT AND I FOUND THE VIDEO BOTH INFORMATIVE AND USEFUL
Thank you! Great demonstration!
I know this is old, but Chrome does work with iLO, it is just not the recommended browser. I use it all the time.
Good to know, I have an hp dl580 g5, setting up in my lab, for plex server and or possible minecraft server for local friends. I use (hate to admit it, since I think google went evil) but use chrome A LOT!! I will test in firefox and post back here if it also works in firefox browser.
I found your video, watched and it was VERY informative and helpful. I got an older hp proliant dl580 g5, from where I worked (it was a decommissioned unit from one of our clients). It works fine, did come with the built in smart array p400 and the secondary add in pci card for 2 HP smart array p400's. has both drive bays and 15 drives, 72gb/15krpm, of which 5 had failed, the array failed but can be rebuilt to what I choose. it only has 1 proc and 8gb mem atm, and both batteries for the cache (BBWC) are bad. using this as a lab server for learning a few things and to possibly build a minecraft server for some of my friends and I, also maybe a plex server. you video was helpful in understanding the ILO part.
gracias aprendi mucho y me ayudo en el trabajo.
Once I bypass the security certificate in internet explorer I get a "cannot display the webpage" what am I missing?
Well this simple video just great , thanks for sharing, It really helpful
Dude you're a legend
Thanks for the guide!
very good video, thanks
Thank you Tyler from Israel!
Nice stuff!!! How did you afford all this?
craigslist, surplus stores, and eBay. It just takes time. It's amazing what deals you can get for used enterprise gear!
Thanks for your comment :)
There are definitely some great deals out there. On one of your videos it says “supper” quiet I think you meant “super”
@@wondertwins2222 what video was that
“How to make your servers supper quiet”
@@wondertwins2222 thanks so much I will fix that
hola, gracias por compartir, saludos desde Venezuela, puedes explicarme que hacer si la pagina no abre, da error de ssl, o certificado y el explorador no me da mas opciones, en el vídeo puedo ver que el explorador te da la opción de seguir y asumir el riesgo, que se hace cuando no te da esa opción? probé con firefox chrome brave y opera sin resultados, cualquier ayuda o comentario muy agradecido de antemano.
thank you bro. you are very good to teaching. make new videos =)
Hello, how about the server is not coming up and you don’t know the ILO up address... how can I go about it
"cold start" comes from old cars who needed to be driven softly when "cold" = offline for longer time
cause i dont think it has somethink to do with pre-heating xD
LOL. Sometimes them ol' Northbridge's and Southbridges like to warm up before they decide to transmit signals.....Like glowplugs on a diesel
Спасибо большое.
👍😊✌
❤❤❤ It helped me
i want to try configure my HP DL380p G8
Bro please am using hp proliant ml 110gen 9 system i have encountered an error hp restful api cannot communicate and settings like intelligent provisioning api resful smart array and ilo have unticked from the screen i cant find the settings in the bios it has made the system very slow takes about 10 minutes to boot to windows please help me
Why the system health showing as degraded and Health LED indication in Amber ? How to fix this issue ?
Cold boot is when you turn on the server after it was shutdown
Good morning, for the issue of monitoring this equipment, how is it done, I have this equipment but it does not have SNMP COMMUNITY and my zabbix monitoring application is not compatible, I also tried IPMI without success. Is there any way to monitor the ILO3
hello Sir, Please help me to configure ilo on hp ml 370g5 server ! This is my question for you , before accessing ilo 2, do I need to configure the port on the switch to which I will connect when accessing ilo via the browser. ???
if you have a switch that you can manage, (log into, like a cisco switch). If a standard home wifi router with the 5 nic ports on back, then all you need to do is just plug in cable from server to there. if it is a 'managed' switch, and switch is defaulted to factory mode, and you have not logged into switch to 'lock' down ports in it or other configurations to the switch, then NO, you would not need to config port, IF you DID lock down ports on switch, then YES you will need to config port on switch. hope this helps.
May I ask how is your monitor connected ? via vga - I connected a video to my server and can't get anything to display.
hello ! can i directly connect with cable from pc nic to server's ilo port without any hub or switch between pc and server ? Will it work ?
you would need a cross over cable for that.
I got this server as a hand me down It says Ilo unresponsive I’ve tried to go into intelligent it says Ilo is unresponsive. It was working then I went into f9 and reset to default and erased it. Any idea how to help it’s my first time doing this now the hard drives aren’t lighting up and I can’t install windows
Привет Илона😀
Do we need to just connect the client by lan cable or configure it's DNS and ip details as well?
configure dns and ip, for the ILO, this lets ILO in server know what your IP scheme is for your (home/soho) lan. as Tyler stated in video above, more than likely you have a DHCP server or device (home wifi router or ISP wifi router) that is already setup to hand out IP's to devices you connect to your lan, such as your server, (with the ILO port in it). so when you get into the servers ILO config, make sure to TURN OFF DHCP in the ILO, otherwise you will have network ip conflicts/issues.
I’ve HP G9 the ILO showing an error on ILO. The server is taking long time to boot up and fans sounds is extremely high. Any suggestions on that ???
maybe check thermal paste? check ram indicator lights
Hello, i was wondering why you turned dhcp off and where you got that ip address? I'm pretty new to this, but I thought dhcp assigned the ip addresses. Did you just pick an address/subnet mask that was not being used by any device? Thanks
You don't want more than 1 device on your network managing DHCP. It's most common to let router handle dhcp and rest of devices turned off. Otherwise it causes networking issues at some point. As far as network IP addy's. When you set up your WAN/LAN {router/modem config} you have the option to set a range of IP addresses you want available to that LAN. If you add another router/switch to that router, you can set up another network but use a different number in the 3rd set. example : First router uses 192.168.0.1 - 192.168.0.255. You'd set the next lvl router/switch to look like 192.168.1.1 - 192.168.1.255. This allows all the networks to talk to each other with minimal congestion. Even with multiple networks linked...You still only want 1 DHCP server. The subnet stuff is generally auto-filled but the one he mentions is the universal default.
@@Diversifried This is wrong. DHCP turned on simply means ilo will pull an IP from the DHCP Server (usually a router) instead of manually setting up the IP like he did in the video.
@@MeLoco317 Exactly what i did to my DL380 Gen 8 server. i let it initialize to run on DHCP, then after it has picked an IP and then set that particular IP to be static for ILO.
Pam and Reeta are in the office. Reeta's feet hurt and her shoes are off. Sorry I.T. smell the feet. Mind reading.
Help brother help
How may I assist you?
iLO2
Great video it helps me out a Lot 👍
Thanks, glad that it help! :)
Thanks for sharing. From what I am seeing, this is a cheap copycat of iDrac with stripped-down features.
I do have 1 question tho, since my server (and yours in the video) are already EOL from HP's perspective, are there free or cheap license keys that we can get to 'activate' the ILO for our own remote access use? anyone in the chat have an answer, much appreciated.
Help brother help