Field experts and Engineers, Please chime in your two cents on video corrections and further explanations on this comment so that people can learn more. Some things were omitted or simplified not to overcomplicate the production of the video and also the content itself, but that doesn't mean we shouldn't know about it. Thank you in advance.
Your description of proportional navigating was spot on, but there were some slight mislabellings in the graphics. The secondary mirror IS the gyroscope in the version shown. The entire optical assembly, that you correctly animated tilting, is spinning the whole time. This is how it stays pointed at the target during the proportional navigation. If the target bearing moves, a force is required to change the orientation of the optical assembly to re-centre it and this command is also fed back to the control system to drive the fin actuators.
Your explanation of the rollerons was quite clear, but the animation shows them pivoting the wrong way to correct the clockwise roll. They need to pivot in the same direction as the roll, to generate torque in the opposite direction and cancel the roll. If you think through their spinning-gyroscope operation, and recall that they’re rolling backward, not forward like bicycle wheels on the ends of the fins, their movements will become clear.
If the shutter disc actually is constructed the way it is shown in the video, then the claim that frequency of the light pattern passing through it changes with how far from the center it passes is wrong. The shutter disc will block the light a specific number of times per second, and as long as the RPM stays constant the number of times per second the light will be blocked (ie the frequency) will be the same. I suspect you just made something up here because you don't know how it works. Both you and I would prosper if an expert could explain the actual conversion of the angles of incoming light into control signals. What is the function of the "shutter disc"? What is the structure of the optical sensor (a "quadrature detector" or some such?)
@@davebowman6497This is in fact how it works. The seeker doesn't "see" a shape, it detects a spot of higher IR brightness. When the spot is sufficiently close to the center it will always have some part "visible" through the disk. When it's not centered the seeker only detects it intermittently. This is why there are three tones; seeking (hiss or low buzz), target detected (buzz), and locked (beep).
Brother i just checked out 8 videos on how the infrared guidance works but no one explained it your video was the only one that did explain it in details thank you so much
They didn’t have ic circuits back in the 50s. I’d have liked to see a description of how they used tubes and valves in a purely analog system back then
@@its_jjk They definitely used tubes, I saw an AIM-9B seeker head in a surplus store in the Bay Area in the 80's there was still one tube attached to the back of the head. Most of the signal processing was done by using multiple windings in the casing surrounding the gyro/spinning telescope assembly. One set of windings drove the gyroscope, another could be driven to cause the telescope to change view angle, one sensed the position of the telescope, and a fourth provided pulses that could be used to steer the fins.
I love being able to see these everyday. We usually load an AIM-9M, AIM-9X, and 2 AIM-120C AMRAAM’s on our F-16s. The rollerons, thrust vectoring motors, moving fins, and the big ol guidance system in the front section poking out are really cool to see right next to my face lol
This was an interesting video and I really enjoyed it, it helped me understand more how missiles work and how the rollerons and guidance actually functioned.
Thank you for posting! I had no idea that the detection system was so rudimentary!! It's brilliant in its simplicity though. Also easy to see why stealth technology was useful.
1971. AIM9G, tubes. 1975 AIM9H the first solid state version. NWC was a cool place to work back in 1974. Planar arrays and the microprocessor now dAIM9X.
5:54 I believe that the tone here isn't from a higher "frequency" its a digital tone played when the seeker is "uncaged" and the AIM-9 is self tracking a target
5:52 Why would the frekvenci be higher at the center? It is spinning wheels with angular velocity constant for every radius. In the middle, the shading element moves slower, but is smaller and the number of he element is constant.
My step dad was involved in the development of this and many more missiles in the 50s and 60s at China Lake Naval Weapons Center (aka NOTS back then). He was head of the Propulsion Development Department. He told me one of the main challenges was making sure the missile didn’t fly towards the sun.
This is one of the most informative and easy to understand videos on this topic. I found this video on my for-you page, and it caught my attention. Would love to see more of these military/engineering animations. You've earned a sub today!
@@TheAlgorithm733 improved versions of the aim 9 for example, i worked for the royal Netherlands Air force up till may 99, after that they had better improved versions of the aim 9 that could not trick the infrared of the missile not get fooled by flairs
I have seen an old sidewinder up close (late 80's). What wasn't mentioned was that the Rollerons were stored inside the hinged surfaces so they don't flap around when the missile is carried around on the aircraft. They were sitting loaded and popped out, to the position showed on the video, to activate only after the missile was fired off the rail. The release mechanism was even better as they had a strong holding each pair of opposite rollerons stopped. The string was going across the rocket motor exhaust. So when the pilot fired the missile, burner through the strings (looked like a cross) and released the rollerons.
i always wondered how would they work when they are carried by the aircraft, were they always spinning? but that could make some unnecessary wear on the rollerons so i ended up thinking, well, maybe they were made heavy enough so they wont be spinning all the time, i thought that since the aircraft never goes as fast as the missiles do so maybe the air that was going trough them wasnt enough to make them spin but i always had that question, this is something you dont find easily even on the internet, thanks for the knowledge.
old version of sidewinder seeker technology is very old Retro technology , now days , in sidewinder X version has a 2D image array sensor and digital analyzer computer to detect enemy.
2 місяці тому
Fantastic! Thx. I never understand how they achieved tracking in 1950s. Very clever :D
What most are not aware of is the aim 7 and 9 were products of Hughes Aircraft Company who brought it from the USN lab to an operational weapon. HAC produced this system through the late 1990's.
at 5:33 when the "red plane" is either in the middle or further away how does the missile or the computer know how much it should steer? okay it knows the frequency but how does it know the side it should steer at?
This is just my guess, but since the seeker scans around the pitch changes, assume the control system knows which direction the seeker is pointing it can steer the missile to the direction.
I believe it could be possible to use the phase difference of the signal, as in you generate a signal that oscillates at the same frequency as the conical scanner speed and then detect the difference is phase between the detected signal and the reference oscillator signal, because the scanner is moving upwards on lets say the right side and downwards on the left, thus depending on which side the enemy aircraft is of the missile the phase difference will be leading or lagging depending on whether the aircraft is on the left or right side. The same method could be used for top and bottom as well.
I wish you would have included the AIM-9X, with thrust vectoring of a solid rocket motor, and the ability to acquire and attack high off-boresight targets. Really cool video, though.
Took about 2 months and 10 hours a day to research, model, shade, texture and animate the entire thing. 400Gbs of Render data too. But I really love tech and good engineering, so it was a fun ride.
Hi, Nice video but at 5:30 there is an error. If the turning reticule pattern is the one presented, the generated frequency f (Hz) is equal to rotation speed v (round per sec) times the number of slits N on the pattern : f= v N and thus is independent from the position of the aircraft image on the reticule leading to a constant frequency f. Something is certainely wrong in your explaination ... Despite that, very ineteresting video.
The missile knows where it as all times. This is because the knows where it by subtracting where it isnt with where it is, and where it is with where it isnt.
The missile can shoot down friendly aircraft as well. The missile itself doesn’t know what’s friend of foe. All it knows that it was launched towards a target and hopes it doesn’t got dud
The rotating reticle in the seeker could not operate as depicted. No matter where the IR source is located, the frequency of the signal will always be the RPM of the reticle times the number of slits on the reticle. Your diagrams at 6:07 show amplitude modulation, not frequency modulation. This video is riddled with errors.
I thought it knew where it is by because it knows where it isn't. By subtracting where it is from where it isn't, or where it isn't from where it is (whichever is greater), it obtains a difference, or deviation. The guidance subsystem uses deviations to generate corrective commands to drive the missile from a position where it is to a position where it isn't, and arriving at a position where it wasn't, it now is. Consequently, the position where it is, is now the position that it wasn't, and it follows that the position that it was, is now the position that it isn't.
Reticle is wrong. Half of it should be fully black. That's how aircraft angular position is detected, by waveform phase not the conic scan. That's for searching for a potential target and tracking it. Also, radial position changes modulation amplitude not the frequency.
You're absolutely right, that's my bad. The reticle should be black on one side. I simplified it for the sake of the animation. It also helps with background noise like clouds and countering flares.
This video has some real weird claims in it: Claims that if the light passes the spinning "shutter disc" close to the center, the frequency will be higher than if it passes further out. Either the depiction of the spinning disc is wrong or this claim is fslse. When discussing the warhead it is said that the explosives are at the center of the warhead. Yet the graphics shows a hollow center and the explodives surrounding the center. When explaining the rollerons the rolleron movement to compensate for an unwanted roll is shown in the wrong direction. Looking from behind, the missile rolls clockwise. The compensation move of the rolleron, as shown, would increase the unwanted toll rather than mitigate it. Anyone thinking they are enlightened by this video should rethink that.
😂😂, they actually used to test the missile with a flashlight if it works correctly before launch, and it was said it used to lock-on to cigarettes when it was being developed in the office. But once it locks on to an aircraft it's not likely for a burning wood to fool it.
An ok explanation of proportional navigation. Misses a lot of fundamentals but aleast its mentioned and you didnt give the crappy “oh and the flight computer computes the intercept course” (which isnt informative and leaves people scratching their heads on HOW it achieves said task. PN = delta(global theta of target) * gain. Tpn which is better is TPN = delta(global theta of target * distance * gain. And so on. You have APN, EPN, ZEMAPN, ZEM, ZEMEPN. There are tons of formulas to calculate an optimal interception course.
2024 rails = take vibrations off the wings missile = takes the radiation of emitters off the cockpit size = assist aerodynamics size = asta and other progressive builds from surface to air and air to air (insides are not AIM-9?) usage = AWAC, EW, high-altitude balance, supersonic flight release, supercruise loadout
weapons officer = radar detects, hand-over to missile, missile reacquire, missile lock using its own radar or infra-red or ... depending on 9? version... skipped these
suzhou industrial park replication of problems = exposé-tech starts = french saboteur provocateur facillitator-coordinator to saboteur-provocateur = exposé-tech enhanced = american microcosm = exposé-tech pattern detection = behavioral traits, character building, personality, principles, ... = exposé-tech combined for risk-security on old-dogs to desperados full game on weapons industry
Amused that you yourself posted a short featuring only the rollerator portion of the animation and pinned your own comment to the top admitting that the animation was backward... And so many have replied arguing with you about your own comment on your own animation. :)
man it feels like people were just smarter and better designers up untill the 70's now it feels like rather than being clever everything is just brute forced with more processing power
Field experts and Engineers, Please chime in your two cents on video corrections and further explanations on this comment so that people can learn more. Some things were omitted or simplified not to overcomplicate the production of the video and also the content itself, but that doesn't mean we shouldn't know about it. Thank you in advance.
Your description of proportional navigating was spot on, but there were some slight mislabellings in the graphics. The secondary mirror IS the gyroscope in the version shown. The entire optical assembly, that you correctly animated tilting, is spinning the whole time. This is how it stays pointed at the target during the proportional navigation. If the target bearing moves, a force is required to change the orientation of the optical assembly to re-centre it and this command is also fed back to the control system to drive the fin actuators.
Your explanation of the rollerons was quite clear, but the animation shows them pivoting the wrong way to correct the clockwise roll. They need to pivot in the same direction as the roll, to generate torque in the opposite direction and cancel the roll. If you think through their spinning-gyroscope operation, and recall that they’re rolling backward, not forward like bicycle wheels on the ends of the fins, their movements will become clear.
Ohhh yeah I noticed that after making a short about it. Thanks for the comments!
If the shutter disc actually is constructed the way it is shown in the video, then the claim that frequency of the light pattern passing through it changes with how far from the center it passes is wrong. The shutter disc will block the light a specific number of times per second, and as long as the RPM stays constant the number of times per second the light will be blocked (ie the frequency) will be the same. I suspect you just made something up here because you don't know how it works.
Both you and I would prosper if an expert could explain the actual conversion of the angles of incoming light into control signals.
What is the function of the "shutter disc"?
What is the structure of the optical sensor (a "quadrature detector" or some such?)
@@davebowman6497This is in fact how it works. The seeker doesn't "see" a shape, it detects a spot of higher IR brightness. When the spot is sufficiently close to the center it will always have some part "visible" through the disk. When it's not centered the seeker only detects it intermittently. This is why there are three tones; seeking (hiss or low buzz), target detected (buzz), and locked (beep).
Brother i just checked out 8 videos on how the infrared guidance works but no one explained it your video was the only one that did explain it in details thank you so much
Awesome, thank you!
@@frontline-visualsbut still did not understand how the detection work in multi dimension because you have explain in one dimension/ Axis
@@asifalikhan8677 it’s detecting 3d particles/waves interacting in a 3d environment, how it’s explained is how it works in multiple dimensions.
@@Madarius7 it's still confusing may be my maths is not on that level 😞
@@asifalikhan8677 couldn’t say why but I have a feeling your math is not lacking, id assume probably more a visualization/language issue.
The missile knows where it is at all times, because it knows where it isn't........
That sound like an explanation of how INAS works.
I knew I was gonna see this comment.
I couldn’t help but think of this statement. I’ve always wondered about the origin.
They didn’t have ic circuits back in the 50s. I’d have liked to see a description of how they used tubes and valves in a purely analog system back then
I assume it would utilize some sort of op-amp/inductors/diodes/capacitors networks?
Didn't use tubes. Couldn't
@@its_jjk They definitely used tubes, I saw an AIM-9B seeker head in a surplus store in the Bay Area in the 80's there was still one tube attached to the back of the head. Most of the signal processing was done by using multiple windings in the casing surrounding the gyro/spinning telescope assembly. One set of windings drove the gyroscope, another could be driven to cause the telescope to change view angle, one sensed the position of the telescope, and a fourth provided pulses that could be used to steer the fins.
@@its_jjkthey did use tubes in early experiments before the transistor, tubes were able to withstand the forces experienced by the missile.
In my opinion, the electronics and sensor signal conditioning are the real miracle of this crazy piece of engineering
5:46 The iconic buzz
omg. this is incredibly well put together
I love being able to see these everyday. We usually load an AIM-9M, AIM-9X, and 2 AIM-120C AMRAAM’s on our F-16s. The rollerons, thrust vectoring motors, moving fins, and the big ol guidance system in the front section poking out are really cool to see right next to my face lol
Why load 9Ms when you have 9X?
@@caleb22229there cheaper
🧢
why mix AIM-9M and AIM-9X? 🤣 aerodynamics?
@@Pvt_Wade Rollerons aren't used now either lol. That guy doesn't know what he is yapping' about
This was an interesting video and I really enjoyed it, it helped me understand more how missiles work and how the rollerons and guidance actually functioned.
Thank you for posting! I had no idea that the detection system was so rudimentary!! It's brilliant in its simplicity though. Also easy to see why stealth technology was useful.
Thank you for the kind comments. You are absolutely right, most engagements will be beyond visual range due to the powerful AIM-9 trackers.
@@frontline-visuals I'm at the DoD. Let me know if you want any content assistance 🙂 I specialize in something you might find useful.
@@AllisonDNADOC Awesome! Thank you very much, it was a pain to look for Public information. I will reach out, Thank you.
I love getting more complicated, so don't try to simplify too much! Fantastic video!!
I can’t believe a missile legit got stuck into a jet and it landed safely without the missing going off 😂😂
That why wise men said
"Make missile more pointy"😂
1971. AIM9G, tubes. 1975 AIM9H the first solid state version. NWC was a cool place to work back in 1974. Planar arrays and the microprocessor now dAIM9X.
This is good. Best missile video on youtube.
This video deserve more views, the information in this video very good. I hope with this comment will trigger youtube logarithm to spread wide. Thanks
Thank you very much, I like the voice and content, which is very well explained
A solid propellant doesn't burn from the front to the back. It burns outward from the core along its entire length
Bro. You just inspired myself to pursue military career. I'll build rocket now! I'm a rocketman now! High five!
5:54 I believe that the tone here isn't from a higher "frequency" its a digital tone played when the seeker is "uncaged" and the AIM-9 is self tracking a target
5:52 Why would the frekvenci be higher at the center? It is spinning wheels with angular velocity constant for every radius. In the middle, the shading element moves slower, but is smaller and the number of he element is constant.
My step dad was involved in the development of this and many more missiles in the 50s and 60s at China Lake Naval Weapons Center (aka NOTS back then). He was head of the Propulsion Development Department. He told me one of the main challenges was making sure the missile didn’t fly towards the sun.
This is one of the most informative and easy to understand videos on this topic. I found this video on my for-you page, and it caught my attention.
Would love to see more of these military/engineering animations. You've earned a sub today!
man this is absolutly fantastic! thank u for these informative & awesome animations
There is a lot of information and details in the video , fascinating video.
Thank you, Mr. Algorithm! 😮
and lots of information is missing in this video
@@MrYessyess like what
@@TheAlgorithm733 improved versions of the aim 9 for example, i worked for the royal Netherlands Air force up till may 99, after that they had better improved versions of the aim 9 that could not trick the infrared of the missile not get fooled by flairs
Thanks a lot for such a detailed explanation
0:48 Just like the missile its naming was brilliant!!
I have seen an old sidewinder up close (late 80's). What wasn't mentioned was that the Rollerons were stored inside the hinged surfaces so they don't flap around when the missile is carried around on the aircraft.
They were sitting loaded and popped out, to the position showed on the video, to activate only after the missile was fired off the rail.
The release mechanism was even better as they had a strong holding each pair of opposite rollerons stopped. The string was going across the rocket motor exhaust. So when the pilot fired the missile, burner through the strings (looked like a cross) and released the rollerons.
i always wondered how would they work when they are carried by the aircraft, were they always spinning? but that could make some unnecessary wear on the rollerons so i ended up thinking, well, maybe they were made heavy enough so they wont be spinning all the time, i thought that since the aircraft never goes as fast as the missiles do so maybe the air that was going trough them wasnt enough to make them spin but i always had that question, this is something you dont find easily even on the internet, thanks for the knowledge.
*fantastic work! Just hope this information doesn't reach the wrong minds* 🔥
Very nice video. Excellent explanation. Wonderful 3D explainer graphics. And a very soothing AI voice. Very nicely rounded.
7:10 Made me laugh, thanks for this video. Really interesting and well explained.
Finally someone appreciated my witty jokes. Thanks for the support means a lot!
Great explanation! How geniously simple the seeker works, wow!
best explanation I've ever seen good work, don't stop! 👍
Nice channel bro
Highly appreciate your content
Thank you, it really means a lot!
Thank you very much for explaining it in such detail, i've been looking for a video like this
Very well made.
This content was amazing🔥
Love the video style!
Beautiful video ❤❤❤❤😊
0:03 not really... but one thing i allways did. does the missile know where it is at some times?
Thanks for the video. Excellent explaination!
old version of sidewinder seeker technology is very old Retro technology , now days , in sidewinder X version has a 2D image array sensor and digital analyzer computer to detect enemy.
Fantastic! Thx. I never understand how they achieved tracking in 1950s. Very clever :D
Very interesting and informative video.
I'd say that's pretty nifty!
What most are not aware of is the aim 7 and 9 were products of Hughes Aircraft Company who brought it from the USN lab to an operational weapon. HAC produced this system through the late 1990's.
The weather might be cloudy 😂
Please more videos like this
at 5:33 when the "red plane" is either in the middle or further away how does the missile or the computer know how much it should steer? okay it knows the frequency but how does it know the side it should steer at?
This is just my guess, but since the seeker scans around the pitch changes, assume the control system knows which direction the seeker is pointing it can steer the missile to the direction.
I believe it could be possible to use the phase difference of the signal, as in you generate a signal that oscillates at the same frequency as the conical scanner speed and then detect the difference is phase between the detected signal and the reference oscillator signal, because the scanner is moving upwards on lets say the right side and downwards on the left, thus depending on which side the enemy aircraft is of the missile the phase difference will be leading or lagging depending on whether the aircraft is on the left or right side. The same method could be used for top and bottom as well.
@@Braydan789 если коротко, то примерно так и происходит, 4а вы описали.
Good shit brother
Amazing Content
How the skibidi is this not popular ofc people must know how a infared missile works🔥🔥🔥🔥🔥🔥 good content
It's my first ever UA-cam Channel, Thank you for the comments bro! Stay tuned I will be making more interesting high quality content. :)
I wish you would have included the AIM-9X, with thrust vectoring of a solid rocket motor, and the ability to acquire and attack high off-boresight targets. Really cool video, though.
this was incredibly informative. did you make all the visuals yourself? can you describe your workflow?
Took about 2 months and 10 hours a day to research, model, shade, texture and animate the entire thing. 400Gbs of Render data too. But I really love tech and good engineering, so it was a fun ride.
The spinner used to transform analog signals to " digital" reminds me of the early mechanical tvs
Your video is good, why does it have such low views. UA-cam is really trying to censor great content like this.
"The missile know where it is, because it know where it isn't"
09:53 pure American thrust ! 😂🤣😛😝
What model of the aim 9 was in the video? I think its the L or M?
It’s cool all in all but can you do 2 videos about the Aim-120 and Aim-174?
Hi. I love your videos. Please, what technology or softwares can I use to create such video animations ?
I use Blender, it's a free and open-source software. You can get it at blender.org
7:16 BWAHAHAHAHA!! That caught me off guard.
Holy shit the original system uses a setup like an optical ignition some older cars used. I really want to build one of these
The missile knows where it is
if it can be told that missles could be beautiful the aim9 is one of them.
How do you generate this voice? Is it yours?
This doesn’t sound like a generated AI voice. This sounds like a human voice.
Please keep it up with this misssile and weapobs videos
Hi,
Nice video but at 5:30 there is an error. If the turning reticule pattern is the one presented, the generated frequency f (Hz) is equal to rotation speed v (round per sec) times the number of slits N on the pattern :
f= v N and thus is independent from the position of the aircraft image on the reticule leading to a constant frequency f. Something is certainely wrong in your explaination ...
Despite that, very ineteresting video.
yes, actually modulation amplitude changes not the frequency
Now make a video about the Aim 7
Did you count the damage done to the state for buying it to the total damage dealt?
Cool
I remember in 1950 we had a computer room and the room was full of computer parts
The device that holds the seeker is not a gyroscope but a gimbal.
A "gimbal" is part of the gyroscope. this has precession and gimbaling coils.
The missile knows where it as all times. This is because the knows where it by subtracting where it isnt with where it is, and where it is with where it isnt.
INAS
I figured this out thrity years ago, only different way of doing the same thing.
like a micro-cosom of the entire MILITARY INDUSTRIAL COMPLEX since start of Cold War.
doesnt matter total monetary value of lost or destroyed equipment
Dang, someone send this to DEstin from Smarter Everyday 😂
Pity about the Soviet reverse-engineering. No possibility of having put a self-destruct timer on the whole caboodle? 🤔
Later versions had both contact fuses and a self-destruct timer.
The missile can shoot down friendly aircraft as well. The missile itself doesn’t know what’s friend of foe. All it knows that it was launched towards a target and hopes it doesn’t got dud
The rotating reticle in the seeker could not operate as depicted. No matter where the IR source is located, the frequency of the signal will always be the RPM of the reticle times the number of slits on the reticle. Your diagrams at 6:07 show amplitude modulation, not frequency modulation. This video is riddled with errors.
I thought it knew where it is by because it knows where it isn't. By subtracting where it is from where it isn't, or where it isn't from where it is (whichever is greater), it obtains a difference, or deviation.
The guidance subsystem uses deviations to generate corrective commands to drive the missile from a position where it is to a position where it isn't, and arriving at a position where it wasn't, it now is. Consequently, the position where it is, is now the position that it wasn't, and it follows that the position that it was, is now the position that it isn't.
it took the Soviets 20yrs to fully reverse engineer the missile into a reliable copy.
Good presentation, but please check your spelling on enemy and receiver…
“Ring of doom” 😂
Reticle is wrong. Half of it should be fully black. That's how aircraft angular position is detected, by waveform phase not the conic scan. That's for searching for a potential target and tracking it. Also, radial position changes modulation amplitude not the frequency.
You're absolutely right, that's my bad. The reticle should be black on one side. I simplified it for the sake of the animation. It also helps with background noise like clouds and countering flares.
6:04 enemey
This video has some real weird claims in it:
Claims that if the light passes the spinning "shutter disc" close to the center, the frequency will be higher than if it passes further out. Either the depiction of the spinning disc is wrong or this claim is fslse.
When discussing the warhead it is said that the explosives are at the center of the warhead. Yet the graphics shows a hollow center and the explodives surrounding the center.
When explaining the rollerons the rolleron movement to compensate for an unwanted roll is shown in the wrong direction. Looking from behind, the missile rolls clockwise. The compensation move of the rolleron, as shown, would increase the unwanted toll rather than mitigate it.
Anyone thinking they are enlightened by this video should rethink that.
If the that Missile was chase me and I burn wood will the missile lose me and it will hit the wood ?lmao
😂😂, they actually used to test the missile with a flashlight if it works correctly before launch, and it was said it used to lock-on to cigarettes when it was being developed in the office. But once it locks on to an aircraft it's not likely for a burning wood to fool it.
Depends on the heat signature,the missiles follows biggest heat source
Only if you have enough time to light your wood
@@jakub-games1899 not always, the 9M and later had IRCCM technology that helped them not do that
IS there anyways to make a bird seeking missile?
An ok explanation of proportional navigation. Misses a lot of fundamentals but aleast its mentioned and you didnt give the crappy “oh and the flight computer computes the intercept course” (which isnt informative and leaves people scratching their heads on HOW it achieves said task. PN = delta(global theta of target) * gain. Tpn which is better is TPN = delta(global theta of target * distance * gain. And so on. You have APN, EPN, ZEMAPN, ZEM, ZEMEPN. There are tons of formulas to calculate an optimal interception course.
🤓🤓🤓🤓🤓🤓
@@brettorton2363 womp womp
2024
rails = take vibrations off the wings
missile = takes the radiation of emitters off the cockpit
size = assist aerodynamics
size = asta and other progressive builds from surface to air and air to air (insides are not AIM-9?)
usage = AWAC, EW, high-altitude balance, supersonic flight release, supercruise loadout
weapons officer
= radar detects, hand-over to missile, missile reacquire, missile lock using its own radar or infra-red or ... depending on 9? version...
skipped these
suzhou industrial park replication of problems
= exposé-tech starts
= french saboteur provocateur facillitator-coordinator to saboteur-provocateur
= exposé-tech enhanced
= american microcosm
= exposé-tech pattern detection
= behavioral traits, character building, personality, principles, ...
= exposé-tech combined for risk-security on old-dogs to desperados
full game on weapons industry
Built by Boeing? Now that would be a concern for the pilot launching a Sidewinder!
"Miss-Aisle." 😂
Amused that you yourself posted a short featuring only the rollerator portion of the animation and pinned your own comment to the top admitting that the animation was backward... And so many have replied arguing with you about your own comment on your own animation. :)
man it feels like people were just smarter and better designers up untill the 70's now it feels like rather than being clever everything is just brute forced with more processing power
Why'd you say aluminium wrong?
The aim 9 is not a missle , its a family of missiles. None ov the versions staied in service 60 years
AI Telly video ,i seen a smiler story we're China got the missile that failed to detonate
And who knows? where the missile is