How did I remove the belt? Since a few people have asked, I’ll pin this on top for everyone to see. I used a hair blower with high heat to soften the belt. I made sure that the shoulder armour is off his shoulders and will not get caught in his arms as I gently slide the belt down. I wiggled it a bit especially around the pelvis as this is the tightest spot. After this it becomes easier to slide it all the way down. Now to put it back on, you need to heat it up again to make it softer. Wiggle and slide it up and try to tuck the parts of the shirt in. Make sure there’s a few centimetres hanging out so you can pull them down later once you have completed sliding it all the way up. Lastly, I apologise for not including this step in my video. I hope this post would suffice. 😅
Thanks for watching and you’re welcome ☺️ Bro those two would totally look awesome together! If I had that figure, I would have posed Asura with him instead of Blade Master Weng. 😆
Your video was the inception for my purchase. When i got it i noticed that it's even better than any of my mezco one:12. Thx for the detail and excellence in the footage recordings. 5 stars.
Hey man! I heated it up with a blower and gently slid it down and wiggle down the waist. Make sure the shoulder armour does not get caught on his arms. Putting it back might be a bit more complicated. You need to tuck the shirt under the belt and at least part of it is hanging down so you can pull them later. Hope this helps 😁
The shoulder armor is glued to the belt at the front and back. Unfortunately, I broke mine so the one at the front is no longer connected 😅 It does seem to have a peg, but mine came off with it. Personally, it worked better this way as it adds flexibility to posing, and I didn’t bother gluing it back. 🙂
I used a hair blower to heat it up. Once it’s softer, it will be easier to slide it down. Make sure the shoulder armor is off the shoulders and does not get caught with the arms. Good luck! 😊
@@topknot01 I haven’t had any such experience, although I assume I haven’t played around it much. Just to be specific, are you pertaining to the sockets that connect to the feet? It would be interesting to check if it would loosen up 😌
@@studioaureal I don't own this figure but the molds the same as the Vtoys naked body, I had 2 and both their legs socket joints got loose over a short time, was just curious if this one had improved.
There will always be risks involved if you’re taking a figure slightly apart. If you really want to see it, best thing to do is heat up the belt with a hair blower and slide it down gently, while making sure the shoulder armor won’t get caught on the arms and shoulders. I think one of the fragile points of this figure is the thin piece that connects the shoulder armor to the belt. If you’re not willing to take the risks, leave it be and you can be sure to have an intact figure. If you go for it and break something, I’m sure it can be fixed with glue. 😅
![Parts swappable, Raijin inspired! Figma Samurai [FALSLANDER/neco] - Action Figure Review](http://i.ytimg.com/vi/a03VNu_8qm8/mqdefault.jpg)
How did I remove the belt? Since a few people have asked, I’ll pin this on top for everyone to see. I used a hair blower with high heat to soften the belt. I made sure that the shoulder armour is off his shoulders and will not get caught in his arms as I gently slide the belt down. I wiggled it a bit especially around the pelvis as this is the tightest spot. After this it becomes easier to slide it all the way down.
Now to put it back on, you need to heat it up again to make it softer. Wiggle and slide it up and try to tuck the parts of the shirt in. Make sure there’s a few centimetres hanging out so you can pull them down later once you have completed sliding it all the way up.
Lastly, I apologise for not including this step in my video. I hope this post would suffice. 😅
I’m glad I picked this one up. Great video 👍
Thanks! It’s one of my favorites now 😁
Thanks for the upload! I have a different ronin figure from NOTTAA Collectibles and after your review I can't wait to see the two together!
Thanks for watching and you’re welcome ☺️ Bro those two would totally look awesome together! If I had that figure, I would have posed Asura with him instead of Blade Master Weng. 😆
Great vid ❤
Glad you enjoyed it! ☺️
Your video was the inception for my purchase. When i got it i noticed that it's even better than any of my mezco one:12. Thx for the detail and excellence in the footage recordings. 5 stars.
Glad you liked it and thanks for the comment!! 😊🍻
Super sick figure!!
It really is! The promotional photos look more detailed though and set high expectations but I’m happy as it is. 😅
YEAAAAA NEW UPLOAD HAPPY NEW YEAR BTW!!!
A happy and prosperous new year to you too!! Cheers 🍻😁
happy new year. awesome video!
Happy new year to you, too!! Thanks a lot for watching and glad you liked it 🙏😁
THasnks for the great review, actually just got this guy in mail and am curious how u got he armor off?
Hey man! I heated it up with a blower and gently slid it down and wiggle down the waist. Make sure the shoulder armour does not get caught on his arms. Putting it back might be a bit more complicated. You need to tuck the shirt under the belt and at least part of it is hanging down so you can pull them later. Hope this helps 😁
Such detailed sculpting.
Have you ever seen an old movie called "Big trouble in little China"?
Hello! I haven’t watched it but I’ll check it out. Is it good? 😁 Happy new year btw! 🥂
It's not that good by modern special effects standards. I thought you might like some of the characters.
I'll give it a go. I've checked it out and it looks interesting. Thanks for the suggestion ☺☺@@mrwoodandmrtin
Question I noticed the shoulder armor doesn’t attach to the belt but it have a hole like if the belt have a peg.
The shoulder armor is glued to the belt at the front and back. Unfortunately, I broke mine so the one at the front is no longer connected 😅 It does seem to have a peg, but mine came off with it. Personally, it worked better this way as it adds flexibility to posing, and I didn’t bother gluing it back. 🙂
@@studioaureal thank you so much brother great review by the way 💪💪💪
@@thebadassreviews02Thanks!! Glad to be of help! Cheers bro 😁
How did u take the belt off?
I used a hair blower to heat it up. Once it’s softer, it will be easier to slide it down. Make sure the shoulder armor is off the shoulders and does not get caught with the arms. Good luck! 😊
Do the leg sockets get loose over time? had a similar issue with the Vtoys 1/12 body
@@topknot01 I haven’t had any such experience, although I assume I haven’t played around it much. Just to be specific, are you pertaining to the sockets that connect to the feet? It would be interesting to check if it would loosen up 😌
@@studioaureal I don't own this figure but the molds the same as the Vtoys naked body, I had 2 and both their legs socket joints got loose over a short time, was just curious if this one had improved.
It’s very nice but I think the green one is better
Thanks for the comment😊 I prefer the red over green but I’m sure the green looks dope, too! The green one’s extra dagger looks really nice!!
Mine arrived and i want to take off the belt armor so bad to see his muscular body! But im to afraid xd
There will always be risks involved if you’re taking a figure slightly apart. If you really want to see it, best thing to do is heat up the belt with a hair blower and slide it down gently, while making sure the shoulder armor won’t get caught on the arms and shoulders. I think one of the fragile points of this figure is the thin piece that connects the shoulder armor to the belt. If you’re not willing to take the risks, leave it be and you can be sure to have an intact figure. If you go for it and break something, I’m sure it can be fixed with glue. 😅
I hear you jamming in the background cuz
Haha see you again next time 😊