Looking forward to seeing this next project getting started! I'd like to see one of your recent builds get completed, I know you get bored after so long on your builds. It would be nice to see Jolene's Bugatti get finished as it looks so close to being ready to put together. You work so hard on your projects and your brain is running 100Km an hour and going a few different directions, but you still do some amazing work just the same! Jolene I know you've probably been told a million times, but your video skills are out of this world. So proud of both of you. It was also cool to see the video of Jolene cruising on the bike today.
@@ohyeah3750 You are still watching, so he is doing something right, the public is easily distracted, so he keeps you coming back, doesn't matter if he starts another project, how many followers do you have
@@davidhughes1201. I was just stating a fact. How many finished projects do you see. I do like seeing him working. A lot of starts but no finishes. Sooooo, STFU.
Thank God he uses a low-speed grinder. My cut off wheels are rated 25K and my grinder runs at 23K. I hope there is at least a two or 3 to 1 safety factor on the wheels. I wouldn’t get in the path of the shrapnel with any grinder
A suggestion on your tool cord problem. Get a roll of electricle cord & make each tool have a 25 or 30 foot cord on them. Make or buy three or more 50 foot extension cords with multiple female plugs to plug in the wall. that way you can have three or more tools plugged in at your work area since you use one tool at a time.
Sometimes it’s like watching death defying act. I hold my breath on some of these chops and always have a wow moment with your talent and minds eye. Carry on and I enjoy the daily content. Great job!
🎉HAPPY BIRTHDAY CHAD🎉🎊🎉🎊🎉🎊🎉🎊🎉🎊 That was a great chop on that roof . I don't think the front window is going to fit though because the cow tappers in and that's why it was buckling in the middle, you might have to cheat it out on each side. I love the side view how it looks. With the back going straight down and it's awesome how far back the windshield is laying. Once you get the back side windows metal in it will look even better. Keep up the fantastic work and God Bless you guys. 🔥💯💪🏼👍👍🙏🙏✌😊✌
It's me again, I remember doing a custom bug for a client... This thing was painted in Centari Rose Blood in a large metal flake. It turned out looking so good it was bitchen. As a matter of fact, the owner decided to go with an engine rebuild... It was just me & brother Rog, it was old school but it was cool. Thing's behind the scenes were off the wall...I could tell you more stories but I' beading have.
Aidyn is sure getting lots of hands on experience working with Chad and Jolene. It is so nice to see him grow in knowledge about building custom vehicles.
Just an observation, Aiden should have a full face shield on. If that cut off disk let’s go, he’ll get it right in the face. I saw it happen to a guy, the disk cut into his neck… just mist an artery. Something to think about….
At 44 minutes in as Ayden was getting ready to cut the rear lower part, A short simple chalk talk would have been most enlightening for us. We watch you work but we can not see the vision. I expect because you are forming the vision as you go. Pulling up old projects from memory and evaluating what angle of attack will work best. But once you settled on the path a simple diagram would have been wonderful for us to better appreciate your decisions and cuts that follow. Also a follow on dialogue regarding the options you saw the methods you had to use, which method you choose and why. These thought process lessons are rarely giving among craftsmen and i know are hard to verbalize but with Jolene and Aydens help i think you could do a session on general sheet cutting and joining decision making, in the creation of custom cars. How you did the pillars was unique, you method to sink the front and rear window is unique. Not conventional but they work. these are golden lessons if you can figure out how to share them effectively. Ah look at past projects and replay portions of the cutting and joining as examples of the various techniques. There is a young man in Missouri, US, Casey Customs you should watch. He does Chassis swaps like i have never seen. And they are wonderful results. But in the middle it likes like he just cut the both cars to hell with no design or purpose. Then magically on day 3 or 4 he sits the body down and it fits pretty good. He also builds a car then has a raffle!!!! He sells 200 tickets at $50 each and ships the finished car to the winner. His idea of finished is a wide variable. the cars are drivable but still rough and may need details, but safe and able to get tags etc. that is working for him. an idea for you maybe. Take care and know I am simply trying help you communicate to the audience a little better and help share your massive skillset and experiences to more folks that dream about building their perfect Hot Rod, like me. All the best, Dennis
Happy Birthday Chad. Quite the birthday present, treating yourself with a choptop!! I also mentioned in the chat that you could probably chop an egg and have it comeout right!!
Who ever said chad can't finish a project is ABSOLUTLY CORRECT. I got interested in this channel on Jolenes bugatti , but am loosing interest due to speech volume problems, and incomplete builds. ( turn your recording volume up and let the veiwer adjust their volume to accommidate appropiatly, or get a throat mic. ) Stellar job on Jolenes camera skills. Jolene should become shop manager and lead chad through life by the ear. Aiden feel sorry for you learning from such a mess.
Not many people in this world get to do what they want. How refreshing is it to see a person spending their time doing what they want . I am happy to be on the journey and have a birds eye view. if nothing ever gets finished fine with me . Enjoy your work/ business if Chad isn't worried about getting things finished neither am i .
Yes !!! Love it you guys !! Pinetree Jamboree 2022 Winterport Dragway in Winterport Maine ! So looking forward to this build and seeing this race car come to life ! Happy Birthday Chad !
Happy birthday Chad! I just turned 48 and feel better than ever! Hope you feel the same! Thanks again for all the great content and keep up the great work!
Happy birthday Chad love your show and a great teacher to Adien. Great job Adien for waiting for the car to stop moving around before you go with the plasma cutter 👍👍👍👍
You chop the top in less than two hours lay it down and then do 50 push-ups on your birthday. Absolutely unbelievable you guys are the best keep it up Chad
Another day and the Sawzall is at work again. Good to see Aidyn working with Chad. Jolene's videography is amazing as always. Happy Birthday Chad - 50 is a very good number :)
His number is not up. I hope it doesn’t come around for a long time. When he’s an old grandpa he can sit on the front porch with his grandson and tell him about all the cars he built as a youngster. Jolene can bring Gramps a coffee and a soda for the boy and sit down with them. ❤️
Please teach your new man/apprentice to protect his hearing by using either ear muffs or earplugs when using power tools. He will not know until it's too late some twenty years later on.
Great job, 👍 you are an artist. Happy birthday Chad. You have cut the roof, now you are going to cut the cake too. (1971 is an excellent year, 😉 I also celebrated last week) Greetings from Switzerland
Not bad for 1 hour and 45 minutes work, chopping 6" or 7" out of a 1935 Ford Sedan. It is great to watch a master fabricator at his trade. Great show boys and Jolene. Happy B-day Bad Chad!
I've never understood why people liked chopped roofs, but I love the technical problems you're solving. Happy birthday man. Always enjoy watching your creations come to life.
Kudos to Chad for a terrific demonstration of a very radical and pleasing chop without the conventionally complicated, roof pie-cutting that would result in a labor-intensive and Frankensteinian butt-weld restitch effort.
Happy Birthday Chad!! The wife and I watch every night. I'm learning lots of tips and tricks from watching your videos. I'm not as creative as you, but you've inspired me to start looking for a project.
Chad my man Happy birthday 50 and so much energy and love of life, cars, work,people, so much respect. All the way from South Africa. Best channel ever . Craziest episode yet
Looking forward to seeing this next project getting started! I'd like to see one of your recent builds get completed, I know you get bored after so long on your builds. It would be nice to see Jolene's Bugatti get finished as it looks so close to being ready to put together. You work so hard on your projects and your brain is running 100Km an hour and going a few different directions, but you still do some amazing work just the same! Jolene I know you've probably been told a million times, but your video skills are out of this world. So proud of both of you. It was also cool to see the video of Jolene cruising on the bike today.
“Aiden what do you think”. ? Thats the way to mentor, inspire and create confidence, a good teacher or boss knows this. Well done Chad
"All human action, whether it becomes positive or negative, must depend on motivation.!" Always positive Jolene and Chad
At least in their TV world.
I was hoping you were going to continue with one of the other projects before starting another
You and me both
Another project that will never be finished.
@@ohyeah3750 You are still watching, so he is doing something right, the public is easily distracted, so he keeps you coming back, doesn't matter if he starts another project, how many followers do you have
@@davidhughes1201. I was just stating a fact. How many finished projects do you see. I do like seeing him working. A lot of starts but no finishes. Sooooo, STFU.
Never thought of laying the windshield back, very cool
Love watching all the different things Chad shows Aiden he’s a real teacher of the art of car building
That's very trew
I agree
Thank God he uses a low-speed grinder. My cut off wheels are rated 25K and my grinder runs at 23K. I hope there is at least a two or 3 to 1 safety factor on the wheels. I wouldn’t get in the path of the shrapnel with any grinder
A suggestion on your tool cord problem. Get a roll of electricle cord & make each tool have a 25 or 30 foot cord on them. Make or buy three or more 50 foot extension cords with multiple female plugs to plug in the wall. that way you can have three or more tools plugged in at your work area since you use one tool at a time.
Happy 50th CHAD,I saw that number go by 22 years ago,and still going strong,keep up the great work you guys
Sometimes it’s like watching death defying act. I hold my breath on some of these chops and always have a wow moment with your talent and minds eye. Carry on and I enjoy the daily content. Great job!
🎉HAPPY BIRTHDAY CHAD🎉🎊🎉🎊🎉🎊🎉🎊🎉🎊
That was a great chop on that roof . I don't think the front window is going to fit though because the cow tappers in and that's why it was buckling in the middle, you might have to cheat it out on each side. I love the side view how it looks. With the back going straight down and it's awesome how far back the windshield is laying. Once you get the back side windows metal in it will look even better. Keep up the fantastic work and God Bless you guys. 🔥💯💪🏼👍👍🙏🙏✌😊✌
It's me again, I remember doing a custom bug for a client... This thing was painted in Centari Rose Blood in a large metal flake. It turned out looking so good it was bitchen. As a matter of fact, the owner decided to go with an engine rebuild... It was just me & brother Rog, it was old school but it was cool. Thing's behind the scenes were off the wall...I could tell you more stories but I' beading have.
Thanks
Aidyn is sure getting lots of hands on experience working with Chad and Jolene. It is so nice to see him grow in knowledge about building custom vehicles.
DITTO
Really enjoyed!!!!!!!!!!!!!!!!!!!!
Happy Birthday Chad 🎂🎁🎂🎁
Just an observation, Aiden should have a full face shield on. If that cut off disk let’s go, he’ll get it right in the face. I saw it happen to a guy, the disk cut into his neck… just mist an artery.
Something to think about….
Happy Birthday Chad! Aidyn is getting some great skill lessons, he's very fortunate to have you as a mentor.
At 44 minutes in as Ayden was getting ready to cut the rear lower part, A short simple chalk talk would have been most enlightening for us. We watch you work but we can not see the vision. I expect because you are forming the vision as you go. Pulling up old projects from memory and evaluating what angle of attack will work best. But once you settled on the path a simple diagram would have been wonderful for us to better appreciate your decisions and cuts that follow. Also a follow on dialogue regarding the options you saw the methods you had to use, which method you choose and why. These thought process lessons are rarely giving among craftsmen and i know are hard to verbalize but with Jolene and Aydens help i think you could do a session on general sheet cutting and joining decision making, in the creation of custom cars. How you did the pillars was unique, you method to sink the front and rear window is unique. Not conventional but they work. these are golden lessons if you can figure out how to share them effectively. Ah look at past projects and replay portions of the cutting and joining as examples of the various techniques.
There is a young man in Missouri, US, Casey Customs you should watch. He does Chassis swaps like i have never seen. And they are wonderful results. But in the middle it likes like he just cut the both cars to hell with no design or purpose. Then magically on day 3 or 4 he sits the body down and it fits pretty good. He also builds a car then has a raffle!!!! He sells 200 tickets at $50 each and ships the finished car to the winner. His idea of finished is a wide variable. the cars are drivable but still rough and may need details, but safe and able to get tags etc. that is working for him. an idea for you maybe. Take care and know I am simply trying help you communicate to the audience a little better and help share your massive skillset and experiences to more folks that dream about building their perfect Hot Rod, like me. All the best, Dennis
Just finished, YES! pulling the front forward made it all come together, well done. Damn it does look good. Very nice, D
Happy Birthday Chad, May God bless you with many years of creating art with cars. Mississippi watching.
Great job 50 HAPPY birthday God bless you and jolene 👉♥️♥️⚘⚘⚘😎😎😎
Happy Birthday Chad. Quite the birthday present, treating yourself with a choptop!! I also mentioned in the chat that you could probably chop an egg and have it comeout right!!
Happy Birthday Chad! Awesome birthday present - chopping a top!
Who ever said chad can't finish a project is ABSOLUTLY CORRECT. I got interested in this channel on Jolenes bugatti , but am loosing interest due to speech volume problems, and incomplete builds. ( turn your recording volume up and let the veiwer adjust their volume to accommidate appropiatly, or get a throat mic. ) Stellar job on Jolenes camera skills. Jolene should become shop manager and lead chad through life by the ear. Aiden feel sorry for you learning from such a mess.
Happy Birthday Chad, you've really enspired us all to do things we wouldn't thought we'd ever do, enjoy your special day and thank you
I agree
I cant wait to see this creation come from your head to reality!
I like at 44:00 when you excused yourself to the front and let Aiden get to build some confidence. Good job Aiden and Chad.
Well another year older and still creating. This is a good thing using the mind keeps you young. Keep it up I like your moxie
Love seeing a new project. Aiden is doing good 👍 thank you for sharing
Love watching and learning. Thanks for the hard work.
Not many people in this world get to do what they want. How refreshing is it to see a person spending their time doing what they want . I am happy to be on the journey and have a birds eye view. if nothing ever gets finished fine with me . Enjoy your work/ business if Chad isn't worried about getting things finished neither am i .
You are a great teacher Aiden is a lucky boy to have you as a teacher. And Jolene is an awesome videographer. Love the show and the COE
Jolene: "what would you like for your birthday?"
Chad: "I think I would like to chop something up"
Jolene: "Go forth and chop away"
Yes !!! Love it you guys !! Pinetree Jamboree 2022 Winterport Dragway in Winterport Maine !
So looking forward to this build and seeing this race car come to life !
Happy Birthday Chad !
gobsmacked at how that all just laid down in place, amazing work
Wait until one day that the unguarded cutoff wheel 'explodes' - USE A GUARD. Have a safe and nice day all. CHEERS from AUSTRALIA.
Congratulations on your birthday. 🥳. And many more good, happy and productive years to come. God bless.
Quality, watching the chop is so good. Hope you have a great birthday sir
I've never seen this process before... Very interesting!!
Happy birthday Chad! I just turned 48 and feel better than ever! Hope you feel the same! Thanks again for all the great content and keep up the great work!
Aidyn where is your ear protection?? Glad to see you doing your first chop...👍🇨🇦
Happy birthday! Love how you do so much in such a short amount of time. A thrill to watch.
Happy birthday Chad! Love seeing what you're doing next.
Happy birthday Chad love your show and a great teacher to Adien. Great job Adien for waiting for the car to stop moving around before you go with the plasma cutter 👍👍👍👍
You chop the top in less than two hours lay it down and then do 50 push-ups on your birthday. Absolutely unbelievable you guys are the best keep it up Chad
Love what you do! But lets finish one?
Happy Birthday Chad! Great to see that you are celebrating by doing what you love.
Another project started, cut, weld , grind its getting a bit old now, does anything get trim and paint?
Happy Birthday, Chad! Love watching you teaching Aidyn some of your many skills..
I really like how you are shaping your cars, the white one on the back is crazy Greetings to all 👍💪🤳
Another day and the Sawzall is at work again. Good to see Aidyn working with Chad. Jolene's videography is amazing as always. Happy Birthday Chad - 50 is a very good number :)
Man I thought he was going to electrocute himself leaving the plug in the puddle lol
His number is not up. I hope it doesn’t come around for a long time. When he’s an old grandpa he can sit on the front porch with his grandson and tell him about all the cars he built as a youngster. Jolene can bring Gramps a coffee and a soda for the boy and sit down with them. ❤️
chad is the most amazing person, his shop has limited equipment yet he produces magnificent cars, Jolene is beautiful
I love the full size laid back windshield look!
Awesome work everyone! Love how you share everything you do with us all.
Ayden is doing a fantastic job hopefully he will go on in life and produce some spectacular cars like Chad.
Can we see at least one finished vehicle
Happy Birthday Chad, like your creativity and showing Aiden how to do things. Keep up the good job.
Wow! Wow! Wow! You make that look so easy! Your vision is incredible!!!
Your doing a great job guys on the roof,Aidyn is doing a terrific job with your guidance Chad.
Please teach your new man/apprentice to protect his hearing by using either ear muffs or earplugs when using power tools. He will not know until it's too late some twenty years later on.
Cool to hear you walk through the process and seeing the chop in action.
Happy Birthday Chad, Have a great day and enjoy all the moments you have, they pass us by so fast.
Happy Birthday! My son celebrated his 16th birthday on the 31st. Hope he develops his passion and lives it out the way you have
The absolute BEST channel on you tube !!!!!!!!!!!!! Love it!!!!
Happy Birthday 🎂 Chad! I hope to spend many more watching you create wonderful works of art. 👍
Happy birthday Chad! Love seeing what you're doing next. Great way to spend a birthday.
Dude, How many projects you have going at the same time?????
Lot of work,great job guy's, happy birthday Chad 🥳🥳
Happy Birthday 🎊🎂🎈🎉🎁 Chad. My twin girls will be 18 on Thursday. Thanks for the invite for your birthday chop.😂😁
Happy Birthday legend, love your work! learning heaps!
Great job, 👍 you are an artist.
Happy birthday Chad. You have cut the roof, now you are going to cut the cake too.
(1971 is an excellent year, 😉 I also celebrated last week)
Greetings from Switzerland
Chad, Jolene, and Ayden, What a surprise for the day: A Ford Chop, "The Stinger." Yowza! Oh, Happy Birthday Chad.
Not bad for 1 hour and 45 minutes work, chopping 6" or 7" out of a 1935 Ford Sedan. It is great to watch a master fabricator at his trade. Great show boys and Jolene. Happy B-day Bad Chad!
I've never understood why people liked chopped roofs, but I love the technical problems you're solving. Happy birthday man. Always enjoy watching your creations come to life.
Wow. You transformed that car in less than 2 hours. Shops would take weeks and not come close. True craftsman.
Do you ever finish anything?
NO!
Not crazy about chopped tops, especially on a 36, but still love watching you work and helping the young man learn.
Dreaming of a race car and a quick and dirty chop!
Just a little off the top! Happy Birthday! You don't look a day over 40!
Happy Birthday from Texas Chad ! Looking great ! you are an artist.
Kudos to Chad for a terrific demonstration of a very radical and pleasing chop without the conventionally complicated, roof pie-cutting that would result in a labor-intensive and Frankensteinian butt-weld restitch effort.
Happy Birthday--I'll be back when you decide to finish a project
Bad Chad and Joleen Ayden creating another masterpiece. Bad Chad and his zip cut / paint brush. Keep up the Great Content. 👍🏁🏆👌
Happy Birthday Chad!! The wife and I watch every night. I'm learning lots of tips and tricks from watching your videos. I'm not as creative as you, but you've inspired me to start looking for a project.
Love the vids and the way you all work together! Move forward and Rock on!
It’s my birthday too! Happy birthday Chad!
Happy Birthday Chad everyone has his or her way of doing it it doesn't matter as long as you wind up at the same place.
what a way to celebrate turning 50, happy birthday Bad Chad from Australia
Chad my man Happy birthday 50 and so much energy and love of life, cars, work,people, so much respect. All the way from South Africa. Best channel ever . Craziest episode yet
Happy Birthday Chad! I hope Jolene spoiled you today (I'm sure she does every day). Thanks for all you and Jolene do for all of us!
Happy Birthday!!!!!!🎂🎈🎉
Happy Birthday Chad,having fun and teaching Aidyn a lot of skills ,great work and thanks Jolene for the great filming,thanks for sharing
Just like Abbott and Costello get the bees mad and put Aidyn inside the car 😂😂😂😂😁
Watch the Cord Aiden. 🤦♂️ ❤
Happy birthday Chad
Bounce around between projects all you want, I enjoy watching it all.
What did you do on break Aidan?”I chopped a 36 Ford coupe and made that into a race car and made cab over out of a 49 merc and another 36 Ford.
Happy Birthday Chad! Glad you could do what you wanted on this day. 😉
happy 50th Chad hope you and your wife have a wonderful day thank you for all your content I enjoy watching everyday
Noticed Aidyn waiting until you stopped cutting with the sawzall to start his cut with the plasma torch. Smart young man. Happy Birthday Chad!
Always make it look so easy! WOW! NICE!!!!
Happy 50th birthday Chad and your present The Chop Top looks great
Happy Birthday Chad, I hope you had a Fantastic Day 🥳🎂
Can you go a month without chopping a top .just kidding. ITS YOUR BIRTHDAY. YOU CAN DO WHAT EVER YOU WANT. GOD BLESS YOU AND JOLENE 👉♥️♥️⚘⚘😎😎😎
Cool job and so creative, love it. HB too!!